Special Issue - Additive Manufacturing Materials & Devices
Open Access
Issue
Manufacturing Rev.
Volume 3, 2016
Special Issue - Additive Manufacturing Materials & Devices
Article Number 15
Number of page(s) 9
DOI http://dx.doi.org/10.1051/mfreview/2016015
Published online 28 September 2016
  1. D.L. Bourell, T.J. Watt, D.K. Leigh, B. Fulcher, Physics Procedia 56 (2014) 147–156. [CrossRef]
  2. M.M. Savalani, L. Hao, Y. Zhang, K.E. Tanner, R.A. Harris, Proceedings of the Institution of Mechanical Engineers H 221 (2007) 873–886. [CrossRef]
  3. A. Amado, M. Schmid, G. Levy, K. Wegener, Proceedings SFF Symposium, Austin, Texas, 2011, pp. 438–452.
  4. D. Drummer, D. Rietzel, F. Kühnlein Physics Procedia Part B 5 (2010) 533–542. [CrossRef]
  5. J.-P. Kruth, G. Levy, R. Schindel, T. Craeghs, E. Yasa, Consolidation of polymer powders by selective laser sintering, PMI International Conference, Ghent, Belgium, 2008, pp. 1–16.
  6. G.V. Salmoria, C.H. Ahrens, P. Klauss, R.A. Paggi, R.G. Oliveira, A. Lago, Materials Research 10 (2007) 211–214. [CrossRef]
  7. S. Ziegelmeier, P. Christou, F. Wöllecke, C. Tuck, R. Goodridge, R. Hague, E. Krampe, E. Wintermantel, Journal of Materials Processing Technology 215 (2015) 239–250. [CrossRef]
  8. R.D. Goodridge, C.J. Tuck, R.J.M. Hague, Progress in Materials Science 57 (2012) 229–267. [CrossRef]
  9. S.M. Kurtz, UHMWPE biomaterials handbook: ultra high molecular weight polyethylene in total joint replacement and medical devices, Academic Press, 2009.
  10. A.D.A. Lucas, J.D. Ambrósio, H. Otaguro, L.C. Costa, J.A.M. Agnelli, Wear 270 (2011) 576–583. [CrossRef]
  11. Q. Zhang, M. Jia, P. Xue, Journal of Applied Polymer Science 126 (2012) 1406–1415. [CrossRef]
  12. D. Jauffrès, O. Lame, G. Vigier, F. Doré, Polymer 48 (2007) 6374–6383. [CrossRef]
  13. X. Liang, X. Wu, K. Zeng, B. Xu, S. Wu, H. Zhao, B. Li, S. Ruan, Journal of Micromechanics and Microengineering 24 (2014) 045014. [CrossRef]
  14. M.B. Turell, A. Bellare, Biomaterials 25 (2004) 3389–3398. [CrossRef]
  15. S.V. Panin, L. Kornienko, M.A. Poltaranin, L.R. Ivanova, S.V. Shilko, Role of micro-and nanofillers in abrasive wear of composites based on ultra-high molecular weight polyethylene, Advanced Materials Research (Trans Tech Publications, 2014), pp. 148–154. [CrossRef]
  16. J.T. Rimell, P.M. Marquis, Journal of Biomedical Materials Research 53 (2000) 414–420. [CrossRef]
  17. R.D. Goodridge, R.J.M. Hague, C.J. Tuck, Journal of Materials Processing Technology 210 (2010) 72–80. [CrossRef]
  18. K. Senthilkumaran, P.M. Pandey, P.V.M. Rao, Materials & Design 30 (2009) 2946–2954. [CrossRef]
  19. K. Manetsberger, J. Shen, J. Muellers, Solid Freeform Fabrication Symposium, Austin, Texas, 2001, pp. 221–232.
  20. N. Hopkinson, T.B. Sercombe, Rapid Prototyping Journal 14 (2008) 108–113. [CrossRef]
  21. B. Caulfield, P.E. McHugh, S. Lohfeld, Journal of Materials Processing Technology 182 (2007) 477–488. [CrossRef]
  22. T.J. Gill, K.K.B. Hon, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 218 (2004) 1249–1256. [CrossRef]