The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
Xibing Gong, Ted Anderson, Kevin Chou
Manufacturing Rev., 1 (2014) 2
Published online: 2014-04-21
This article has been cited by the following article(s):
Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications
Sneha Goel, Jonas Olsson, Magnus Ahlfors, Uta Klement and Shrikant Joshi
The Minerals, Metals & Materials Series, Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications 115 (2018)
DOI: 10.1007/978-3-319-89480-5_6
See this article
Microstructure and Compressive Behavior of Ti-6Al-4V Alloy Built by Electron Beam Free-Form Fabrication
Vasiliy A. Klimenov, Vasiliy V. Fedorov, Mikhail S. Slobodyan, Natalya S. Pushilina, Irina L. Strelkova, Anatoliy A. Klopotov and Andrey V. Batranin
Journal of Materials Engineering and Performance 29 (11) 7710 (2020)
DOI: 10.1007/s11665-020-05223-9
See this article
Normalised model-based processing diagrams for additive layer manufacture of engineering alloys
Meurig Thomas, Gavin J. Baxter and Iain Todd
Acta Materialia 108 26 (2016)
DOI: 10.1016/j.actamat.2016.02.025
See this article
Electrical discharge machining of electron beam melting formed shrouded blisk
Wei Liang, Xiaoming Kang, Wansheng Zhao and Yuxuan Yang
The International Journal of Advanced Manufacturing Technology (2016)
DOI: 10.1007/s00170-016-8545-0
See this article
Powders for powder bed fusion: a review
Silvia Vock, Burghardt Klöden, Alexander Kirchner, Thomas Weißgärber and Bernd Kieback
Progress in Additive Manufacturing 4 (4) 383 (2019)
DOI: 10.1007/s40964-019-00078-6
See this article
Searching for Rheological Conditions for FFF 3D Printing with PVC Based Flexible Compounds
I. Calafel, R. H. Aguirresarobe, M. I. Peñas, et al.
Materials 13 (1) 178 (2020)
DOI: 10.3390/ma13010178
See this article
Tensile and Creep Properties Improvement of Ti-6Al-4V Alloy Specimens Produced by Electron Beam Powder Bed Fusion Additive Manufacturing
Placido Aliprandi, Fabio Giudice, Eugenio Guglielmino and Andrea Sili
Metals 9 (11) 1207 (2019)
DOI: 10.3390/met9111207
See this article
Sintering Behavior and Microstructure of TiC-Me Composite Powder Prepared by SHS
Elena Korosteleva, Victoria Korzhova and Maksim Krinitcyn
Metals 7 (8) 290 (2017)
DOI: 10.3390/met7080290
See this article
Mechanical properties of additive-manufactured porous titanium bio-structures with oriented macro-scale channels
Ahmad Basalah, Shahrzad Esmaeili and Ehsan Toyserkani
The International Journal of Advanced Manufacturing Technology 84 (9-12) 2239 (2016)
DOI: 10.1007/s00170-015-7849-9
See this article
Electron beam melted Ti-6Al-4V: microstructure, texture and mechanical behavior of the as-built and heat-treated material
Charlotte de Formanoir, Sébastien Michotte, Olivier Rigo, Lionel Germain and Stéphane Godet
Materials Science and Engineering: A (2015)
DOI: 10.1016/j.msea.2015.11.052
See this article
Additive manufacturing of Ti-45Al-4Nb-C by selective electron beam melting for automotive applications
V. Juechter, M.M. Franke, T. Merenda, et al.
Additive Manufacturing (2018)
DOI: 10.1016/j.addma.2018.05.008
See this article
Solid-State Metal Additive Manufacturing: A Review
Nihan Tuncer and Animesh Bose
JOM 72 (9) 3090 (2020)
DOI: 10.1007/s11837-020-04260-y
See this article
Physico-Chemical Challenges in 3D Printing of Polymeric Nanocomposites and Hydrogels for Biomedical Applications
Massimo Bonini
Journal of Nanoscience and Nanotechnology 21 (5) 2778 (2021)
DOI: 10.1166/jnn.2021.19063
See this article
Finite element framework for electron beam melting process simulation
Muhammad Qasim Zafar, Chao Chao Wu, Haiyan Zhao, Jinnan Wang and Xingjian Hu
The International Journal of Advanced Manufacturing Technology 109 (7-8) 2095 (2020)
DOI: 10.1007/s00170-020-05707-x
See this article
Relationship between the microstructure and mechanical properties of an equiatomic AlCoCrFeNi high-entropy alloy fabricated by selective electron beam melting
Hiroshi Shiratori, Tadashi Fujieda, Kenta Yamanaka, et al.
Materials Science and Engineering: A 656 39 (2016)
DOI: 10.1016/j.msea.2016.01.019
See this article
Benchmarking Spatial Resolution in Electronic Imaging for Potential In-Situ Electron Beam Melting Monitoring
Hay Wong, Derek Neary, Eric Jones, Peter Fox and Chris Sutcliffe
Additive Manufacturing 100829 (2019)
DOI: 10.1016/j.addma.2019.100829
See this article
Multi-scale modeling of selective electron beam melting of Ti6Al4V titanium alloy
Trong-Nhan Le, Yu-Lung Lo and Hong-Chuong Tran
The International Journal of Advanced Manufacturing Technology 105 (1-4) 545 (2019)
DOI: 10.1007/s00170-019-04188-x
See this article
An overview of wire arc additive manufacturing (WAAM) in shipbuilding industry
Ahmet Taşdemir and Serkan Nohut
Ships and Offshore Structures 16 (7) 797 (2021)
DOI: 10.1080/17445302.2020.1786232
See this article
Investigating the Stress Corrosion Cracking (SCC) Susceptibility of Ti-6Al-4V Alloys Fabricated by Electron Beam Melting in Deep-Sea Environment
Yang Zhao, Yuchen Liu, Xin Gai, Yun Bai, Tao Zhang, Dake Xu and Fuhui Wang
Corrosion 77 (8) 853 (2021)
DOI: 10.5006/3822
See this article
Thermal characterization of the build chamber in electron beam melting
E. Landau, E. Tiferet, Y.I. Ganor, et al.
Additive Manufacturing 101535 (2020)
DOI: 10.1016/j.addma.2020.101535
See this article
Selective laser melting-wire arc additive manufacturing hybrid fabrication of Ti-6Al-4V alloy: microstructure and mechanical properties
Xuezhi Shi, Shuyuan Ma, Changmeng Liu, et al.
Materials Science and Engineering: A (2016)
DOI: 10.1016/j.msea.2016.12.065
See this article
Solid/Powder Clad Ti-6Al-4V Alloy with Low Young’s Modulus and High Toughness Fabricated by Electron Beam Melting
Naoko Ikeo, Takuya Ishimoto, Natsumi Hiramoto, et al.
MATERIALS TRANSACTIONS 56 (5) 755 (2015)
DOI: 10.2320/matertrans.M2015025
See this article
Micro-tube fabricating path compensation method research
Youping Gong, Yunpeng Lv, Shaohui Su, Zhihua Li and Guojin Chen
The International Journal of Advanced Manufacturing Technology 85 (9-12) 2277 (2016)
DOI: 10.1007/s00170-015-8301-x
See this article
Pilot Investigation of Feedback Electronic Image Generation in Electron Beam Melting and its Potential for In-Process Monitoring
Hay Wong, Derek Neary, Sohail Shahzad, et al.
Journal of Materials Processing Technology (2018)
DOI: 10.1016/j.jmatprotec.2018.10.016
See this article
Dual-Detector Electronic Monitoring of Electron Beam Selective Melting
D.C. Zhao and F. Lin
Journal of Materials Processing Technology 116935 (2020)
DOI: 10.1016/j.jmatprotec.2020.116935
See this article
Effect of energy input on microstructure and mechanical properties in EBSM Ti6Al4V
Wenjun Ge, Feng Lin and Chao Guo
Materials and Manufacturing Processes 33 (15) 1708 (2018)
DOI: 10.1080/10426914.2015.1048463
See this article
Powder Reuse Cycles in Electron Beam Powder Bed Fusion—Variation of Powder Characteristics
Gitanjali Shanbhag and Mihaela Vlasea
Materials 14 (16) 4602 (2021)
DOI: 10.3390/ma14164602
See this article
TMS 2016 145th Annual Meeting & Exhibition
Pan Wang, Mui Ling Sharon Nai, Xipeng Tan, et al.
TMS 2016 145th Annual Meeting & Exhibition 5 (2016)
DOI: 10.1007/978-3-319-48254-5_1
See this article
TMS 2015 144th Annual Meeting & Exhibition
Xibing Gong and Kevin Chou
TMS 2015 144th Annual Meeting & Exhibition 461 (2015)
DOI: 10.1007/978-3-319-48127-2_58
See this article
TMS 2016: 145thAnnual Meeting & Exhibition: Supplemental Proceedings
Pan Wang, Mui Ling Sharon Nai, Xipeng Tan, et al.
TMS 2016: 145thAnnual Meeting & Exhibition: Supplemental Proceedings 1 (2016)
DOI: 10.1002/9781119274896.ch1
See this article
TMS2015 Supplemental Proceedings
Xibing Gong and Kevin Chou
TMS2015 Supplemental Proceedings 461 (2015)
DOI: 10.1002/9781119093466.ch58
See this article
Mathematical modelling of thermal and kinetic phenomena in electron-beam technologies
A G Knyazeva, I L Pobol and V N Demidov
IOP Conference Series: Materials Science and Engineering 140 012021 (2016)
DOI: 10.1088/1757-899X/140/1/012021
See this article
The simulation researches on hot extrusion of super-fined tube made of magnesium alloys
H. J. Hu, Z. Y. Zhai, Y. Y. Li, et al.
Russian Journal of Non-Ferrous Metals 56 (2) 196 (2015)
DOI: 10.3103/S1067821215020066
See this article
Building new entities from existing titanium part by electron beam melting: microstructures and mechanical properties
Guillaume Mandil, Van Thao Le, Henri Paris and Mathieu Suard
The International Journal of Advanced Manufacturing Technology 85 (5-8) 1835 (2016)
DOI: 10.1007/s00170-015-8049-3
See this article
Thermofluid Properties of Ti-6Al-4V Melt Pool in Powder-Bed Electron Beam Additive Manufacturing
M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington and Uttam K. Chakravarty
Journal of Engineering Materials and Technology 141 (4) (2019)
DOI: 10.1115/1.4043342
See this article
Influence of hot isostatic pressing and surface finish on the mechanical behaviour of Ti6Al4V processed by electron beam melting
Stefania Franchitti, Carmine Pirozzi and Rosario Borrelli
Fatigue & Fracture of Engineering Materials & Structures 43 (12) 2828 (2020)
DOI: 10.1111/ffe.13295
See this article
FROM METALLURGY OF GRANULES TO ADDITIVE TECHNOLOGIES
A. N. Timofeev and A. I. Logacheva
Izvestiya Vuzov Tsvetnaya Metallurgiya (Proceedings of Higher Schools Nonferrous Metallurgy (3) 84 (2018)
DOI: 10.17073/0021-3438-2018-3-84-94
See this article
Additive Manufacturing of Alloy 718 via Electron Beam Melting: Effect of Post-Treatment on the Microstructure and the Mechanical Properties
Arun Balachandramurthi, Johan Moverare, Satyapal Mahade and Robert Pederson
Materials 12 (1) 68 (2018)
DOI: 10.3390/ma12010068
See this article
Fabrication and microstructural characterisation of additive manufactured Ti-6Al-4V parts by electron beam melting
Yihong Kok, Xipeng Tan, Shu Beng Tor and Chee Kai Chua
Virtual and Physical Prototyping 10 (1) 13 (2015)
DOI: 10.1080/17452759.2015.1008643
See this article
Comparisons of extruded magnesium rods by hyperbolic curve die and parabolic curve die
H. -J. Hu, Y. -Y. Li, Z. -Y. Zhai, et al.
Russian Journal of Non-Ferrous Metals 56 (2) 212 (2015)
DOI: 10.3103/S1067821215020078
See this article
Effect of Hot Isostatic Pressure treatment on the Electron-Beam Melted Ti-6Al-4V specimens
Vladimir Popov, Alexander Katz-Demyanetz, Andrey Garkun, et al.
Procedia Manufacturing 21 125 (2018)
DOI: 10.1016/j.promfg.2018.02.102
See this article
An experimental investigation into the dimensional error of powder-binder three-dimensional printing
M. N. Islam and Samuel Sacks
The International Journal of Advanced Manufacturing Technology 82 (5-8) 1371 (2016)
DOI: 10.1007/s00170-015-7482-7
See this article
Dry sliding wear behavior of ES-processed AZ31B magnesium alloy
H.-J. Hu, J.-Z. Fan, H. Wang, et al.
Russian Journal of Non-Ferrous Metals 56 (4) 392 (2015)
DOI: 10.3103/S1067821215040057
See this article
Microstructure and mechanical properties of 304L steel fabricated by arc additive manufacturing
Lei Ji, Jiping Lu, Changmeng Liu, et al.
MATEC Web of Conferences 128 03006 (2017)
DOI: 10.1051/matecconf/201712803006
See this article
Build Height Effect on the Inconel 718 Parts Fabricated by Selective Laser Melting
Xiaoqing Wang, Tahmina Keya and Kevin Chou
Procedia Manufacturing 5 1006 (2016)
DOI: 10.1016/j.promfg.2016.08.089
See this article
Additive manufacturing of metallic components by selective electron beam melting — a review
C. Körner
International Materials Reviews 61 (5) 361 (2016)
DOI: 10.1080/09506608.2016.1176289
See this article
Evaluation of 3D-printed parts by means of high-performance computer tomography
Elena Lopez, Tomás Felgueiras, Christian Grunert, et al.
Journal of Laser Applications 30 (3) 032307 (2018)
DOI: 10.2351/1.5040644
See this article
Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V
Mohsen Seifi, Matthew Dahar, Ron Aman, et al.
JOM 67 (3) 597 (2015)
DOI: 10.1007/s11837-015-1298-7
See this article
Relationships between process parameters and temperature field of roll casting for wide sheet made of AZ61 magnesium alloy: Finite element method
H. J. Hu, Y. Y. Li and J. L. Dai
Russian Journal of Non-Ferrous Metals 56 (1) 33 (2015)
DOI: 10.3103/S1067821215010101
See this article
Kinetics of powder layer shrinkage during electron-beam treatment
A Knyazeva
Journal of Physics: Conference Series 754 042009 (2016)
DOI: 10.1088/1742-6596/754/4/042009
See this article
Geometry dependence of microstructure and microhardness for selective electron beam-melted Ti–6Al–4V parts
Y. H. Kok, X. P. Tan, N. H. Loh, S. B. Tor and C. K. Chua
Virtual and Physical Prototyping 11 (3) 183 (2016)
DOI: 10.1080/17452759.2016.1210483
See this article
State of the Art and Future Trends in Material Modeling
Enes Sert, Andreas Öchsner, Leonhard Hitzler, Ewald Werner and Markus Merkel
Advanced Structured Materials, State of the Art and Future Trends in Material Modeling 100 349 (2019)
DOI: 10.1007/978-3-030-30355-6_14
See this article
Pilot capability evaluation of a feedback electronic imaging system prototype for in-process monitoring in electron beam additive manufacturing
Hay Wong, Derek Neary, Eric Jones, Peter Fox and Chris Sutcliffe
The International Journal of Advanced Manufacturing Technology 100 (1-4) 707 (2019)
DOI: 10.1007/s00170-018-2702-6
See this article
Multi-dimensional Additive Manufacturing
Fujio Tsumori
Multi-dimensional Additive Manufacturing 27 (2021)
DOI: 10.1007/978-981-15-7910-3_2
See this article
Pilot Feedback Electronic Imaging at Elevated Temperatures and its Potential for In-Process Electron Beam Melting Monitoring
Hay Wong, Derek Neary, Eric Jones, Peter Fox and Chris Sutcliffe
Additive Manufacturing (2019)
DOI: 10.1016/j.addma.2019.02.022
See this article
3D printing for soft robotics – a review
Jahan Zeb Gul, Memoon Sajid, Muhammad Muqeet Rehman, et al.
Science and Technology of Advanced Materials 19 (1) 243 (2018)
DOI: 10.1080/14686996.2018.1431862
See this article
Capturing the effects of free surfaces on void strengthening with dislocation dynamics
Joshua C. Crone, Lynn B. Munday and Jaroslaw Knap
Acta Materialia 101 40 (2015)
DOI: 10.1016/j.actamat.2015.08.067
See this article
Material characterisation using electronic imaging for Electron Beam Melting process monitoring
Hay Wong, Rebecca Garrard, Kate Black, Peter Fox and Chris Sutcliffe
Manufacturing Letters (2019)
DOI: 10.1016/j.mfglet.2019.12.005
See this article
Can Appropriate Thermal Post-Treatment Make Defect Content in as-Built Electron Beam Additively Manufactured Alloy 718 Irrelevant?
Sneha Goel, Kévin Bourreau, Jonas Olsson, Uta Klement and Shrikant Joshi
Materials 13 (3) 536 (2020)
DOI: 10.3390/ma13030536
See this article
A novel additive manufacturing-based technique for developing bio-structures with conformal channels and encapsulated voids
Ahmad Basalah, Shahrzad Esmaeili and Ehsan Toyserkani
Biomedical Physics & Engineering Express 1 (4) 045007 (2015)
DOI: 10.1088/2057-1976/1/4/045007
See this article
Investigation of Solidification and Precipitation Behavior of Si-Modified 7075 Aluminum Alloy Fabricated by Laser-Based Powder Bed Fusion
Guichuan Li, Suraj Dinkar Jadhav, Arturo Martín, et al.
Metallurgical and Materials Transactions A 52 (1) 194 (2021)
DOI: 10.1007/s11661-020-06073-9
See this article
Review of Powder Bed Fusion Additive Manufacturing for Metals
Leila Ladani and Maryam Sadeghilaridjani
Metals 11 (9) 1391 (2021)
DOI: 10.3390/met11091391
See this article
Abdalla R. Nassar and Edward W. Reutzel
200 (2020)
DOI: 10.31399/asm.hb.v24.a0006545
See this article
Tribological Properties of Additive Manufactured Materials for Energy Applications: A Review
Alessandro M. Ralls, Pankaj Kumar and Pradeep L. Menezes
Processes 9 (1) 31 (2020)
DOI: 10.3390/pr9010031
See this article
Cost Modeling and Evaluation of Direct Metal Laser Sintering with Integrated Dynamic Process Planning
Lei Di and Yiran Yang
Sustainability 13 (1) 319 (2020)
DOI: 10.3390/su13010319
See this article
Topological, Mechanical and Biological Properties of Ti6Al4V Scaffolds for Bone Tissue Regeneration Fabricated with Reused Powders via Electron Beam Melting
Maria Laura Gatto, Riccardo Groppo, Nora Bloise, et al.
Materials 14 (1) 224 (2021)
DOI: 10.3390/ma14010224
See this article
The Effect of Post-Processing on the Mechanical Behavior of Ti6Al4V Manufactured by Electron Beam Powder Bed Fusion for General Aviation Primary Structural Applications
Carmine Pirozzi, Stefania Franchitti, Rosario Borrelli, Antonio Chiariello and Luigi Di Palma
Aerospace 7 (6) 75 (2020)
DOI: 10.3390/aerospace7060075
See this article
Additive manufacturing of isotropic-grained, high-strength and high-ductility copper alloys
Wenlong Lu, Wenzheng Zhai, Jian Wang, et al.
Additive Manufacturing 101751 (2020)
DOI: 10.1016/j.addma.2020.101751
See this article
Improving mechanical properties of wire‐based EBAM
Ti‐6Al‐4V
parts by adding
TiC
powders
Alexey V. Panin, Marina S. Kazachenok, Elena A. Sinyakova, et al.
Material Design & Processing Communications 3 (1) (2021)
DOI: 10.1002/mdp2.136
See this article
Metal Material, Properties and Design Methods of Porous Biomedical Scaffolds for Additive Manufacturing: A Review
Yuting Lv, Binghao Wang, Guohao Liu, et al.
Frontiers in Bioengineering and Biotechnology 9 (2021)
DOI: 10.3389/fbioe.2021.641130
See this article
Effects of Gas Pressure during Electron Beam Energy Deposition in the EBM Additive Manufacturing Process
Elroei Damri, Eitan Tiferet, Dor Braun, et al.
Metals 11 (4) 601 (2021)
DOI: 10.3390/met11040601
See this article
Novel Characterization Techniques for Additive Manufacturing Powder Feedstock
Benjamin Young, Joseph Heelan, Sean Langan, et al.
Metals 11 (5) 720 (2021)
DOI: 10.3390/met11050720
See this article
Progress on In Situ and Operando X-ray Imaging of Solidification Processes
Shyamprasad Karagadde, Chu Lun Alex Leung and Peter D. Lee
Materials 14 (9) 2374 (2021)
DOI: 10.3390/ma14092374
See this article
Additive Manufacturing - A Literature Review
Penumuru Kumar, Arumugam Mahamani and B. Durga Prasad
Materials Science Forum 979 74 (2020)
DOI: 10.4028/www.scientific.net/MSF.979.74
See this article
Jonathan Becedas and Andrés Caparrós
(2019)
DOI: 10.5772/intechopen.78762
See this article
Numerical simulation for electron beam selective melting PBF additive manufacturing of molybdenum
Muhammad Qasim Zafar, Chaochao Wu, Haiyan Zhao, Du Kai and Qianming Gong
The International Journal of Advanced Manufacturing Technology 117 (5-6) 1575 (2021)
DOI: 10.1007/s00170-021-07671-6
See this article
Andrew T. Polonsky, Narendran Raghavan, McLean P. Echlin, Michael M. Kirka, Ryan R. Dehoff and Tresa M. Pollock
990 (2020)
DOI: 10.1007/978-3-030-51834-9_97
See this article
Shaped metal deposition technique in additive manufacturing: A review
Oguzhan Yilmaz and Adnan A Ugla
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 230 (10) 1781 (2016)
DOI: 10.1177/0954405416640181
See this article
A review on metallurgical aspects of laser additive manufacturing (LAM): Stainless steels, nickel superalloys, and titanium alloys
Kh. Moeinfar, F. Khodabakhshi, S.F. Kashani-bozorg, M. Mohammadi and A.P. Gerlich
Journal of Materials Research and Technology (2021)
DOI: 10.1016/j.jmrt.2021.12.039
See this article
Printing functional metallic 3D parts using a hybrid friction-surfacing additive manufacturing process
Esraa S. Abdelall, Abdullah F. Al-Dwairi, Shatha Mahmoud Al-Raba’a and Mohamed Eldakroury
Progress in Additive Manufacturing 6 (4) 731 (2021)
DOI: 10.1007/s40964-021-00193-3
See this article
Possibilities of Electron Beam Melting Technology: Titanium Processing
Michaela Fousova and Dalibor Vojtech
Manufacturing Technology 18 (3) 387 (2018)
DOI: 10.21062/ujep/110.2018/a/1213-2489/MT/18/3/387
See this article
Additive manufacturing of bulk metallic glasses: Fundamental principle, current/future developments and applications
H.R. Lashgari, M. Ferry and S. Li
Journal of Materials Science & Technology (2022)
DOI: 10.1016/j.jmst.2021.09.068
See this article
Selective Electron Beam Melting (SEBM) of Pure Tungsten: Metallurgical Defects, Microstructure, Texture and Mechanical Properties
Xin Ren, Hui Peng, Jingli Li, Hailin Liu, Liming Huang and Xin Yi
Materials 15 (3) 1172 (2022)
DOI: 10.3390/ma15031172
See this article
Laser spot welding of additive manufactured 304L stainless steel
Cheryl Hawk, Brian Simonds, Jack Tanner, Robin Pacheco, Michael Brand, Greg Vigil, Daniel Javernick and Stephen Liu
Welding in the World 66 (5) 895 (2022)
DOI: 10.1007/s40194-022-01265-w
See this article
Influences of Post-Heat Treatment on the Microstructure Evolution and Creep Properties of Ni-Based Superalloy IN718 Fabricated by Electron Beam Melting
Thaviti Naidu Palleda, Santhosh Banoth, Yen-Ling Kuo and Koji Kakehi
Metals 12 (3) 446 (2022)
DOI: 10.3390/met12030446
See this article
Effect of processing parameters on pore structures, grain features, and mechanical properties in Ti-6Al-4V by laser powder bed fusion
Qixiang Luo, Lu Yin, Timothy W. Simpson and Allison M. Beese
Additive Manufacturing 56 102915 (2022)
DOI: 10.1016/j.addma.2022.102915
See this article
Fatigue behaviour of laser powder bed fusion (L-PBF) Ti–6Al–4V, Al–Si–Mg and stainless steels: a brief overview
L. Afroz, R. Das, M. Qian, M. Easton and M. Brandt
International Journal of Fracture 235 (1) 3 (2022)
DOI: 10.1007/s10704-022-00641-3
See this article
Basic Mechanism of Surface Topography Evolution in Electron Beam Based Additive Manufacturing
Christoph Breuning, Julian Pistor, Matthias Markl and Carolin Körner
Materials 15 (14) 4754 (2022)
DOI: 10.3390/ma15144754
See this article
Effect of HIP Defects on the Mechanical Properties of Additive Manufactured Ti6Al4V Alloy
Ohad Dolev, Tomer Ron, Eli Aghion and Amnon Shirizly
Metals 12 (7) 1210 (2022)
DOI: 10.3390/met12071210
See this article
Additive Manufacturing in Biomedical Applications
Leon Pope, Darpan Shidid and Kate Fox
Additive Manufacturing in Biomedical Applications 115 (2022)
DOI: 10.31399/asm.hb.v23A.a0006859
See this article
Experimental Investigation of the Tribological Contact between Ti6Al4V-EBM Pin and UHMWPE Rotating Sheet for Prosthetic Applications
Annamaria Visco, Fabio Giudice, Eugenio Guglielmino, Cristina Scolaro and Andrea Sili
Metals 12 (9) 1526 (2022)
DOI: 10.3390/met12091526
See this article
Effect of build orientation on wear and erosion behavior of maraging steel processed by powder bed fusion using laser beam (PBF-LB)
Jaydeep Vishwakarma, K Chattopadhyay and N C Santhi Srinivas
Surface Topography: Metrology and Properties 10 (4) 045006 (2022)
DOI: 10.1088/2051-672X/ac998f
See this article