A critical review on special forming processes and associated research for lightweight components based on sheet and tube materials
Manufacturing Rev., 1 (2014) 9
Published online: 2014-08-12
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
A review of near‐net shape forming by hot isostatic pressure technology
Zhoujin Lv, Min Lu, Guoqiang Xiao, Yuan Ma, Ding Weng, Bao Wang, Zeyang Shang, Wen Qi, Lei Chen, Jinlin Chang and Jiadao WangJournal of the American Ceramic Society 108 (2) (2025)
https://doi.org/10.1111/jace.20196
Advances in improving tribological performance of titanium alloys and titanium matrix composites for biomedical applications: a critical review
Eray Abakay, Mustafa Armağan, Yasemin Yıldıran Avcu, Mert Guney, B. F. Yousif and Egemen AvcuFrontiers in Materials 11 (2024)
https://doi.org/10.3389/fmats.2024.1452288
Cryogenic Failure Behaviors of Al–Mg–Si Alloy Tubes in Bulging Process
Xiaobo Fan, Xugang Wang, Xianshuo Chen and Shijian YuanJournal of Manufacturing Science and Engineering 146 (6) (2024)
https://doi.org/10.1115/1.4064691
A review of emerging hydroforming technologies: design considerations, parametric studies, and recent innovations
Satish Chinchanikar, Harsh Mulik, Param Varude, Sameer Atole and Neha MundadaJournal of Engineering and Applied Science 71 (1) (2024)
https://doi.org/10.1186/s44147-024-00546-z
Plastic wrinkling of thin-walled tubes under axial compression in non-uniform temperature field
Xiao-Lei Cui, Ju Guo, Shi-Yu Wen, Xiu-Min Wu and Peng LinProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 237 (2) 406 (2023)
https://doi.org/10.1177/09544062221121987
(2023)
https://doi.org/10.21203/rs.3.rs-2716660/v1
Investigation on a new compound-forming method of flanging and bulging with rubber flexible die
Chuang Wei, Zhiren Han, Baoming Liu and Zhen JiaThe International Journal of Advanced Manufacturing Technology 129 (11-12) 5561 (2023)
https://doi.org/10.1007/s00170-023-12669-3
A Study on the Impact of Blank Holder Pressure on Forming Pressure and Product Quality in Hydrostatic Forming
Thu Thi Nguyen and Trung Dac NguyenInternational Journal of Precision Engineering and Manufacturing 24 (2) 187 (2023)
https://doi.org/10.1007/s12541-022-00740-0
Cryogenic deformation behavior of 6061 aluminum alloy tube under biaxial tension condition
Xugang Wang, Xiaobo Fan, Xianshuo Chen and Shijian YuanJournal of Materials Processing Technology 117532 (2022)
https://doi.org/10.1016/j.jmatprotec.2022.117532
Study of forming mechanics of magnetic field–assisted single point incremental forming
Dylan Pinard, David R. Skelton, Marco Gucciardi, et al.Journal of Manufacturing Processes 79 28 (2022)
https://doi.org/10.1016/j.jmapro.2022.04.038
Welding of magnesium and its alloys: an overview of methods and process parameters and their effects on mechanical behaviour and structural integrity of the welds
Desmond Edem Primus Klenam, Gabriel Seun Ogunwande, Taiwo Omotosho, et al.Manufacturing Review 8 29 (2021)
https://doi.org/10.1051/mfreview/2021028
A Review on Lightweight Metal Component Forming and its Application
H K Madhusudhana, V N Gaitonde and G Satish JangaliJournal of Physics: Conference Series 2070 (1) 012246 (2021)
https://doi.org/10.1088/1742-6596/2070/1/012246
Development of Magnetic Field-Assisted Single-Point Incremental Forming
Marco Gucciardi, Derrick Benson, Livan Fratini, Gianluca Buffa and Hitomi YamaguchiKey Engineering Materials 883 189 (2021)
https://doi.org/10.4028/www.scientific.net/KEM.883.189
Magnetic field-assisted single-point incremental forming with a magnet ball tool
Gianluca Buffa, Hitomi Yamaguchi, Marco Gucciardi, Dylan Pinard and Livan FratiniCIRP Annals 70 (1) 265 (2021)
https://doi.org/10.1016/j.cirp.2021.04.089
Experimental Modeling of Pressure in the Hydrostatic Formation of a Cylindrical Cup with Different Materials
Trung-Kien Le, Thi-Thu Nguyen and Ngoc-Tam BuiApplied Sciences 11 (13) 5814 (2021)
https://doi.org/10.3390/app11135814
Effect of Annealing on Anisotropic Tensile Properties of Al–12%Si Alloy Fabricated by Laser Powder Bed Fusion
Mulin Liu, Takafumi Wada, Asuka Suzuki, et al.Crystals 10 (11) 1007 (2020)
https://doi.org/10.3390/cryst10111007
Evolution of Hydroforming Technologies and Its Applications — A Review
P. Venkateshwar Reddy, B. Veerabhadra Reddy and P. Janaki RamuluJournal of Advanced Manufacturing Systems 19 (04) 737 (2020)
https://doi.org/10.1142/S0219686720500341
Review on Advances in Metal Micro-Tube Forming
Christoph HartlMetals 9 (5) 542 (2019)
https://doi.org/10.3390/met9050542
Numerical study on nozzle-field cooling of heated aluminium blanks for hot-stamping
Yankang Tian, Yihui Zhao, Daniel Melville and Yi QinProcedia Manufacturing 15 1134 (2018)
https://doi.org/10.1016/j.promfg.2018.07.377
Research on Al-alloy sheet forming formability during warm/hot sheet hydroforming based on elliptical warm bulging test
Gaoshen Cai, Chuanyu Wu, Zepu Gao, Lihui Lang and Sergei AlexandrovAIP Advances 8 (5) (2018)
https://doi.org/10.1063/1.5029539
Investigation of residual stress distribution in single point incremental forming of aluminum parts by X-ray diffraction technique
Isaac Jiménez, Cecilio López, Oscar Martinez-Romero, et al.The International Journal of Advanced Manufacturing Technology 91 (5-8) 2571 (2017)
https://doi.org/10.1007/s00170-016-9952-y
Incremental deformation: A literature review
Daniel Nasulea, Gheorghe Oancea, I. Bondrea, C. Simion and M. InţăMATEC Web of Conferences 121 03017 (2017)
https://doi.org/10.1051/matecconf/201712103017
Unified constitutive modelling for two-phase lamellar titanium alloys at hot forming conditions
Lei Yang, Nan Li, Baoyu Wang, et al.Manufacturing Review 3 14 (2016)
https://doi.org/10.1051/mfreview/2016016
A novel approach to determine plastic hardening curves of AA7075 sheet utilizing hydraulic bulging test at elevated temperature
Kangning Liu, Lihui Lang, Gaoshen Cai, et al.International Journal of Mechanical Sciences 100 328 (2015)
https://doi.org/10.1016/j.ijmecsci.2015.07.002