Integration of additive manufacturing and inkjet printed electronics: a potential route to parts with embedded multifunctionality
Manufacturing Rev., 3 (2016) 12
Published online: 2016-07-26
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Determination of Cyclic Load Limits for Plasma‐Sprayed Copper Tracks on Material Extrusion‐Based Printed Surfaces
Tanja Stiller, Andreas Hausberger, Michael Berer, Alexander M. Schwan, Andreas Hinterer, Sebastian Spalt, Gerald Pinter and Jürgen M. LacknerAdvanced Engineering Materials 25 (7) (2023)
https://doi.org/10.1002/adem.202200567
65 (2022)
https://doi.org/10.23919/ICEP55381.2022.9795503
Challenges, Prospects, and Emerging Applications of Inkjet‐Printed Electronics: A Chemist's Point of View
Justin Lemarchand, Nathalie Bridonneau, Nicolas Battaglini, Florent Carn, Giorgio Mattana, Benoit Piro, Samia Zrig and Vincent NoëlAngewandte Chemie 134 (20) (2022)
https://doi.org/10.1002/ange.202200166
A Survey of 3D Printing Technologies as Applied to Printed Electronics
Jeevan Persad and Sean RockeIEEE Access 10 27289 (2022)
https://doi.org/10.1109/ACCESS.2022.3157833
High Resolution Manufacturing from 2D to 3D/4D Printing
Matteo Manachino, Gianluca Melis, Stefano Stassi, Sergio Ferrero and Luciano ScaltritoHigh Resolution Manufacturing from 2D to 3D/4D Printing 191 (2022)
https://doi.org/10.1007/978-3-031-13779-2_8
Challenges, Prospects, and Emerging Applications of Inkjet‐Printed Electronics: A Chemist's Point of View
Justin Lemarchand, Nathalie Bridonneau, Nicolas Battaglini, Florent Carn, Giorgio Mattana, Benoit Piro, Samia Zrig and Vincent NoëlAngewandte Chemie International Edition 61 (20) (2022)
https://doi.org/10.1002/anie.202200166
Hybrid additive manufacture: surface finishing methods for improving conductivity of inkjet printed tracks on non-planar substrates fabricated using fused deposition modelling
Elliott R Griffiths and Simon J LeighSensors and Actuators A: Physical 113235 (2021)
https://doi.org/10.1016/j.sna.2021.113235
A Review on Printed Electronics: Fabrication Methods, Inks, Substrates, Applications and Environmental Impacts
Jenny Wiklund, Alp Karakoç, Toni Palko, et al.Journal of Manufacturing and Materials Processing 5 (3) 89 (2021)
https://doi.org/10.3390/jmmp5030089
Ultrawideband inkjet‐printed monopole antennas for energy harvesting application
Antonio Alex‐Amor, Ángel Palomares‐Caballero, Javier Moreno‐Núñez, Adrián Tamayo‐Domínguez, Carmelo García‐García and José M. Fernández‐GonzálezMicrowave and Optical Technology Letters 63 (6) 1719 (2021)
https://doi.org/10.1002/mop.32803
Laser-induced forward transfer of conductive screen-printing inks
P. Sopeña, J.M. Fernández-Pradas and P. SerraApplied Surface Science 507 145047 (2020)
https://doi.org/10.1016/j.apsusc.2019.145047
Geometry Control of Source/Drain Electrodes in Organic Field-Effect Transistors by Electrohydrodynamic Inkjet Printing
Piotr Sleczkowski, Michal Borkowski, Hanna Zajaczkowska, et al.Materials 13 (21) 4974 (2020)
https://doi.org/10.3390/ma13214974
Laser‐Induced Forward Transfer: A Digital Approach for Printing Devices on Regular Paper
Pol Sopeña, Javier Sieiro, Juan M. Fernández‐Pradas, José M. López‐Villegas and Pere SerraAdvanced Materials Technologies 5 (6) (2020)
https://doi.org/10.1002/admt.202000080
A 3D printable self-healing composite conductive polymer for sensitive temperature detection
Mengnan He, Yan Zhao, Yunqi Liu and Dacheng WeiChinese Chemical Letters 31 (3) 826 (2020)
https://doi.org/10.1016/j.cclet.2019.06.003
Topology-Aware Routing of 3D-Printed Circuits
Florens Wasserfall, Norman Hendrich, Daniel Ahlers and Jianwei ZhangAdditive Manufacturing 101523 (2020)
https://doi.org/10.1016/j.addma.2020.101523
Future Sensors for Smart Objects by Printing Technologies in Industry 4.0 Scenario
Michela Borghetti, Edoardo Cantù, Emilio Sardini and Mauro SerpelloniEnergies 13 (22) 5916 (2020)
https://doi.org/10.3390/en13225916
Hybrid additive manufacturing of the modified electrolyte‐electrode surface of planar solid oxide fuel cells
Farid Salari, Alireza Badihi Najafabadi, Mojtaba Ghatee and Mohammad GolmohammadInternational Journal of Applied Ceramic Technology 17 (4) 1554 (2020)
https://doi.org/10.1111/ijac.13527
Recent Progress in Manufacturing Techniques of Printed and Flexible Sensors: A Review
Dinesh Maddipatla, Binu B. Narakathu and Massood AtashbarBiosensors 10 (12) 199 (2020)
https://doi.org/10.3390/bios10120199
Development of copper powder paste for direct printing and soft mold casting
Yao Zhao, Weixiao Gao, Jiaxin Xi, Haoqi Li and Fei RenAdditive Manufacturing 100992 (2019)
https://doi.org/10.1016/j.addma.2019.100992
Reliability of inkjet printed silver nanoparticle interconnects on deformable substrates tested through an electromechanical in-situ technique
Martina Aurora Costa Angeli, Tobias Cramer, Beatrice Fraboni, et al.MRS Communications 9 (1) 129 (2019)
https://doi.org/10.1557/mrc.2019.10
Pinhole‐Free Inkjet Printing Strategies for Organic Electronics
Armin Heinrichsdobler, Julia Christina Roigk, Frank Schirmeier, Christoph Josef Brabec and Thomas WehlusAdvanced Materials Technologies 2 (12) (2017)
https://doi.org/10.1002/admt.201700166
Experimental study on injecting highly viscous liquids by using a reciprocating needle dispensing system
Yasuyuki Kusaka, Sakae Manaka, Koji Abe, Noritaka Yamamoto and Hirobumi UshijimaThe International Journal of Advanced Manufacturing Technology 90 (5-8) 2243 (2017)
https://doi.org/10.1007/s00170-016-9538-8