Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Opportunities and limitations of metal additive manufacturing of structured catalytic converters

Fatemeh Mehdipour, Tim Delrieux, Florian Maurer, Jan-Dierk Grunwaldt, Christoph Klahn and Roland Dittmeyer
Catalysis Communications 187 106873 (2024)
https://doi.org/10.1016/j.catcom.2024.106873

Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives

Karin Hartl, Christopher Wallis, Pier Paolo Curti, Martin Bielik and Martin Stockinger
The Minerals, Metals & Materials Series, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives 789 (2023)
https://doi.org/10.1007/978-3-031-27447-3_47

MODEL OF THE PHASE COMPOSITION EVOLUTION IN A METAL MELT OF A PARTICLE MADE OF COMPOSITE POWDER

Mariia A. Anisimova and Anna G. Knyazeva
High Temperature Material Processes An International Quarterly of High-Technology Plasma Processes 27 (3) 1 (2023)
https://doi.org/10.1615/HighTempMatProc.2022046221

Influence of selective laser melting process parameters on the surface integrity of difficult-to-cut alloys: comprehensive review and future prospects

Danil Yu. Pimenov, Lucas Freitas Berti, Giuseppe Pintaude, et al.
The International Journal of Advanced Manufacturing Technology 127 (3-4) 1071 (2023)
https://doi.org/10.1007/s00170-023-11541-8

Additively manufactured materials and structures: A state-of-the-art review on their mechanical characteristics and energy absorption

Yaozhong Wu, Jianguang Fang, Chi Wu, et al.
International Journal of Mechanical Sciences 246 108102 (2023)
https://doi.org/10.1016/j.ijmecsci.2023.108102

Handbook of Research on Corrosion Sciences and Engineering

Loutfy Madkour
Advances in Chemical and Materials Engineering, Handbook of Research on Corrosion Sciences and Engineering 135 (2023)
https://doi.org/10.4018/978-1-6684-7689-5.ch006

Alternating chempolishing and electropolishing for interior and exterior surface finishing of additively manufactured (AM) metal components

Joshua Dillard, Andrew Grizzle, Wondwosen Demisse, et al.
The International Journal of Advanced Manufacturing Technology 121 (11-12) 8159 (2022)
https://doi.org/10.1007/s00170-022-09857-y

Recent Advances in Alloy Development for Metal Additive Manufacturing in Gas Turbine/Aerospace Applications: A Review

Dheepa Srinivasan and Kiruthika Ananth
Journal of the Indian Institute of Science 102 (1) 311 (2022)
https://doi.org/10.1007/s41745-022-00290-4

A Theoretical Model of the Flow Properties of Postprocessed Direct Metal Laser Sintering Ti6Al4V (ELI)

A. M. Muiruri, M. Maringa, W. du Preez and Guosong Wu
Advances in Materials Science and Engineering 2022 1 (2022)
https://doi.org/10.1155/2022/4048913

Crack Types, Mechanisms, and Suppression Methods during High-Energy Beam Additive Manufacturing of Nickel-based Superalloys: A Review

Qingsong Wei, Yin Xie, Qing Teng, Muyu Shen, Shanshan Sun and Chao Cai
Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers 100055 (2022)
https://doi.org/10.1016/j.cjmeam.2022.100055

Review Study on Mechanical and Thermal Properties of Ceramic Materials for Future Aerospace Applications

Nikkisha S, Rohan S, Pragyan Pattanaik Pattanaik, Ankit Kumar Mishra and Dheva Darshini
Materials and its Characterization 1 (2) 107 (2022)
https://doi.org/10.46632/mc/1/2/7

Post-infiltration to improve the density of binder jetting ceramic parts

Qirong CHEN, Enrique JUSTE, Marie LASGORCEIX, Guillaume LEFEBVRE, Christophe TENAILLEAU, Benjamin DUPLOYER, David GROSSIN, Fabrice PETIT and Anne LERICHE
Journal of the European Ceramic Society (2022)
https://doi.org/10.1016/j.jeurceramsoc.2022.08.005

Femtosecond Laser-Based Additive Manufacturing: Current Status and Perspectives

Atiq Basha Kaligar, Hemnath Anandan Kumar, Asghar Ali, et al.
Quantum Beam Science 6 (1) 5 (2022)
https://doi.org/10.3390/qubs6010005

Influence of Epoxy Resin Curing Kinetics on the Mechanical Properties of Carbon Fiber Composites

Isidro Cruz-Cruz, Claudia A. Ramírez-Herrera, Oscar Martínez-Romero, et al.
Polymers 14 (6) 1100 (2022)
https://doi.org/10.3390/polym14061100

Review of high energy x-ray computed tomography for non-destructive dimensional metrology of large metallic advanced manufactured components

Wenjuan Sun, Daniel R Symes, Ceri M Brenner, et al.
Reports on Progress in Physics 85 (1) 016102 (2022)
https://doi.org/10.1088/1361-6633/ac43f6

Strain Rate and Temperature Effects in Nanoindentation Testing on Hardness in Selective Laser Melting IN718

Reem Abo Znemah, George Z. Voyiadjis, Paul Wood and Edris Akbari
Journal of Engineering Materials and Technology 144 (1) (2022)
https://doi.org/10.1115/1.4051691

ESTIMATION OF EDDY CURRENTS AND POWER LOSSES IN THE ROTOR OF A SCREW ELECTROTHERMOMECHANICAL CONVERTER FOR ADDITIVE MANUFACTURING

Volodymyr Gritsyuk, Igor Nevliudov, Mykola Zablodskiy and Periasami Subramanian
Naukovij žurnal «Tehnìka ta energetika» 13 (2) (2022)
https://doi.org/10.31548/machenergy.13(2).2022.41-49

Performance Analysis of Electro-chemical Machining of Ti-48Al-2Nb-2Cr Produced by Electron Beam Melting

Manuela Galati, Silvio Defanti and Lucia Denti
Smart and Sustainable Manufacturing Systems 6 (1) 53 (2022)
https://doi.org/10.1520/SSMS20210041

Compressive Properties of 316L Stainless Steel Topology‐Optimized Lattice Structures Fabricated by Selective Laser Melting

Yangli Xu, Tingting Li, Xuanyang Cao, Yuanqiang Tan and Peihui Luo
Advanced Engineering Materials 23 (3) (2021)
https://doi.org/10.1002/adem.202000957

Influences of Process Parameters on the Microstructure and Mechanical Properties of CoCrFeNiTi Based High-Entropy Alloy in a Laser Powder Bed Fusion Process

Takafumi Ikeda, Makiko Yonehara, Toshi-Taka Ikeshoji, et al.
Crystals 11 (5) 549 (2021)
https://doi.org/10.3390/cryst11050549

Conventional and Additively Manufactured Stainless Steels: A Review

J. R. Jessy Michla, Rajini Nagarajan, Senthilkumar Krishnasamy, et al.
Transactions of the Indian Institute of Metals 74 (6) 1261 (2021)
https://doi.org/10.1007/s12666-021-02305-7

The titanium 3D-printed flute: New prospects of additive manufacturing for musical wind instruments design

A. Kolomiets, Y.J. Grobman, V. V. Popov, et al.
Journal of New Music Research 50 (1) 1 (2021)
https://doi.org/10.1080/09298215.2020.1824240

Corrosion Resistance of Al–CNT Metal Matrix Composites

Vladimir V. Popov, Alla Pismenny, Natalya Larianovsky, Anna Lapteva and Daniel Safranchik
Materials 14 (13) 3530 (2021)
https://doi.org/10.3390/ma14133530

Closest and long-term prospects of 3D-printing for obstetrics and gynecology

E. V. Kudryavtseva, V. V. Kovalev, E. S. Zakurinova, G. Muller-Kamskii and V. V. Popov
Ural Medical Journal 20 (1) 76 (2021)
https://doi.org/10.52420/2071-5943-2021-20-1-76-81

Processing, Characterization, and Properties of α-Al2O3-AA2900 Composites for Aerospace Brake Pad Applications

P. Ashwath, M. Anthony Xavior and Andre DL Batako
JOM 73 (12) 4365 (2021)
https://doi.org/10.1007/s11837-021-04925-2

Powder Bed Fusion Additive Manufacturing Using Critical Raw Materials: A Review

Vladimir V. Popov, Maria Luisa Grilli, Andrey Koptyug, et al.
Materials 14 (4) 909 (2021)
https://doi.org/10.3390/ma14040909

Complex Concentrated Alloys for Substitution of Critical Raw Materials in Applications for Extreme Conditions

Dumitru Mitrica, Ioana Cristina Badea, Beatrice Adriana Serban, et al.
Materials 14 (5) 1197 (2021)
https://doi.org/10.3390/ma14051197

Comparison based on specific strength and density of in-situ Ti/Al and Ti/Ni metal intermetallic laminates

Nagarajan Thiyaneshwaran, Chithirai Pon Selvan, Avinash Lakshmikanthan, Katakam Sivaprasad and Balasubramanian Ravisankar
Journal of Materials Research and Technology (2021)
https://doi.org/10.1016/j.jmrt.2021.06.102

Metal additive manufacturing in aerospace: a review

Byron Blakey-Milner, Paul Gradl, Glen Snedden, Michael Brooks, Jean Pitot, Elena Lopez, Martin Leary, Filippo Berto and Anton du Plessis
Materials & Design 110008 (2021)
https://doi.org/10.1016/j.matdes.2021.110008

Additive and Subtractive Manufacturing of Composites

Siddharth Srivastava, Aanchna Sharma and Vinod Kushvaha
Springer Series in Advanced Manufacturing, Additive and Subtractive Manufacturing of Composites 201 (2021)
https://doi.org/10.1007/978-981-16-3184-9_8

Texturing and Phase Evolution in Ti-6Al-4V: Effect of Electron Beam Melting Process, Powder Re-Using, and HIP Treatment

Vladimir V. Popov, Mikhail L. Lobanov, Stepan I. Stepanov, et al.
Materials 14 (16) 4473 (2021)
https://doi.org/10.3390/ma14164473