EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Manufacturing Rev., 7 (2020) 4 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

A comprehensive review on underwater welding: methods, property evaluations and challenges

Abhiram Vijay and N. Radhika
Advances in Materials and Processing Technologies 10 (2) 923 (2024)
https://doi.org/10.1080/2374068X.2023.2184582

Effect of oxygen in shielding gas on weldability in plasma-GMA hybrid welding process of high-tensile strength steel

Quang Ngoc Trinh, Shinichi Tashiro, Tetsuo Suga, Hiroto Yamaoka, Kotaro Inose, Kosuke Watanabe, Kengo Hyoma, Yoshihiro Tanabe, Van Hanh Bui and Manabu Tanaka
The International Journal of Advanced Manufacturing Technology 134 (1-2) 283 (2024)
https://doi.org/10.1007/s00170-024-14100-x

Modeling and measurements of temperature field in the arc welding and hybrid plasma-MAG welding heat source models

Damian Rochalski, Dariusz Golański, Jacek Szulc and Przemysław Połaski
Welding Technology Review 96 107 (2024)
https://doi.org/10.26628/simp.wtr.v96.1182.107-116

Arc Characteristics and Welding Process of Laser K-TIG Hybrid Welding

Hongchang Zhang, Jiang Yu, Zixiao Zhang, et al.
Metals 12 (7) 1139 (2022)
https://doi.org/10.3390/met12071139

Assessment the Partial Welding Influences on Fatigue Life of S700MC Steel Fillet Welds

Jaromir Moravec, Jiri Sobotka, Iva Novakova and Sarka Bukovska
Metals 11 (2) 334 (2021)
https://doi.org/10.3390/met11020334

Welding of magnesium and its alloys: an overview of methods and process parameters and their effects on mechanical behaviour and structural integrity of the welds

Desmond Edem Primus Klenam, Gabriel Seun Ogunwande, Taiwo Omotosho, et al.
Manufacturing Review 8 29 (2021)
https://doi.org/10.1051/mfreview/2021028

Parameter Optimization of Hybrid-Tandem Gas Metal Arc Welding Using Analysis of Variance-Based Gaussian Process Regression

Jin Young Kim, Dae Young Lee, Jaeyoung Lee and Seung Hwan Lee
Metals 11 (7) 1087 (2021)
https://doi.org/10.3390/met11071087

Weldability of Underwater Wet-Welded HSLA Steel: Effects of Electrode Hydrophobic Coatings

Jacek Tomków
Materials 14 (6) 1364 (2021)
https://doi.org/10.3390/ma14061364

Butt welding of thin sheets of S960MC steel

MiloÅ¡ Mičian, Martin Frátrik, Libor TrÅ¡ko, Marek Gucwa, Jerzy Winczek and Łukasz Skroński
Welding Technology Review 93 (2) 5 (2021)
https://doi.org/10.26628/wtr.v93i2.1130

Microstructural Investigation of a Friction-Welded 316L Stainless Steel with Ultrafine-Grained Structure Obtained by Hydrostatic Extrusion

Beata Skowrońska, Tomasz Chmielewski, Mariusz Kulczyk, Jacek Skiba and Sylwia Przybysz
Materials 14 (6) 1537 (2021)
https://doi.org/10.3390/ma14061537

Welding supports of fine-grained steel mobile platforms

Abilio Silva, Bożena Szczucka-Lasota, Tomasz Węgrzyn and Adam Jurek
Welding Technology Review 92 (6) 17 (2020)
https://doi.org/10.26628/wtr.v92i6.1112

Verification of the welding heat source models in arc welding and hybrid plasma-MAG welding processes based on temperature field tests

Damian Rochalski, Dariusz Golański and Jacek Szulc
Welding Technology Review 92 (5) 25 (2020)
https://doi.org/10.26628/wtr.v92i5.1117

Numerical Verification of Tests on the Influence of the Imposed Thermal Cycles on the Structure and Properties of the S700MC Heat-Affected Zone

Tomasz Kik, Jacek Górka, Aleksandra Kotarska and Tomasz Poloczek
Metals 10 (7) 974 (2020)
https://doi.org/10.3390/met10070974

Structural investigation of the Plasma Transferred Arc hardfaced glass mold after operation

Beata Skowrońska, Wojciech Sokołowski and Reyhaneh Rostamian
Welding Technology Review 92 (3) 55 (2020)
https://doi.org/10.26628/wtr.v92i3.1109

Welding Thermal Cycles of Joints Made of S1100QL Steel by Saw and Hybrid Plasma-Mag Processes

A. Sajek
Advances in Materials Science 20 (4) 75 (2020)
https://doi.org/10.2478/adms-2020-0023

Welding of DOCOL 1200M using micro-jet cooling

Abilio Silva, Bożena Szczucka-Lasota, Tomasz Węgrzyn and Adam Jurek
Welding Technology Review 92 (1) 25 (2020)
https://doi.org/10.26628/wtr.v92i1.1087

Experiments and Numerical Simulations of the Annealing Temperature Influence on the Residual Stresses Level in S700MC Steel Welded Elements

Tomasz Kik, Jaromír Moravec and Martin Švec
Materials 13 (22) 5289 (2020)
https://doi.org/10.3390/ma13225289

Underwater In Situ Local Heat Treatment by Additional Stitches for Improving the Weldability of Steel

Jacek Tomków and Anna Janeczek
Applied Sciences 10 (5) 1823 (2020)
https://doi.org/10.3390/app10051823

Welding supports of pins in mobile platforms

Abilio Silva, Bożena Szczucka-Lasota, Tomasz Węgrzyn, Adam Jurek and Krzysztof Ireneusz Wilczyński
Welding Technology Review 92 (4) 25 (2020)
https://doi.org/10.26628/wtr.v92i4.1111

Dissimilar underwater wet welding of HSLA steels

Jacek Tomków, Dariusz Fydrych and Grzegorz Rogalski
The International Journal of Advanced Manufacturing Technology 109 (3-4) 717 (2020)
https://doi.org/10.1007/s00170-020-05617-y