Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Combination of DOE and PIV methods for multi-criteria decision making

Trung Duc and Tan Ngoc
Journal of Applied Engineering Science 21 (2) 361 (2023)
https://doi.org/10.5937/jaes0-41482

RSMVC: A new-simple method to select the cutting tool base on multi criteria

Dua Van and Thinh Xuan
Journal of Applied Engineering Science 21 (2) 167 (2023)
https://doi.org/10.5937/jaes0-39772

An MCDM approach for multi-response optimisation of machining parameters in turning of EN8 steel (AISI-1040) for sustainable manufacturing

Mohd Bilal Naim Shaikh, Mohammed Ali, Zahid A. Khan and Mohammad Asjad
International Journal on Interactive Design and Manufacturing (IJIDeM) 17 (6) 3159 (2023)
https://doi.org/10.1007/s12008-023-01368-8

Comparison of two methods in multi-criteria decision-making: application in transmission rod material selection

Hoang Xuan Thinh and Nguyen Trong Mai
EUREKA: Physics and Engineering (6) 59 (2023)
https://doi.org/10.21303/2461-4262.2023.003046

Expanding the Data Normalization Strategy to the MACONT Method for Multi-Criteria Decision Making

Anh-Tu Nguyen
Engineering, Technology & Applied Science Research 13 (2) 10489 (2023)
https://doi.org/10.48084/etasr.5672

Advances in Engineering Research and Application

Trieu Quy Huy, Nguyen Ba Liem, Tran Quang Hau, et al.
Lecture Notes in Networks and Systems, Advances in Engineering Research and Application 602 234 (2023)
https://doi.org/10.1007/978-3-031-22200-9_25

Performance evaluation of process parameters using MCDM methods for Titanium Alloy (Ti6al4v) in turning operation

Sushil V Ingle and Dadarao N Raut
Australian Journal of Mechanical Engineering 1 (2023)
https://doi.org/10.1080/14484846.2023.2203886

Advances in Engineering Research and Application

Trieu Quy Huy, Le Hong Ky, Le Hoang Anh, et al.
Lecture Notes in Networks and Systems, Advances in Engineering Research and Application 602 254 (2023)
https://doi.org/10.1007/978-3-031-22200-9_27

Advances in Engineering Research and Application

Nguyen Anh Tuan, Trieu Quy Huy, Tran Huu Danh, et al.
Lecture Notes in Networks and Systems, Advances in Engineering Research and Application 602 389 (2023)
https://doi.org/10.1007/978-3-031-22200-9_42

Multi-objective optimization model of cutting parameters for a sustainable multi-pass turning process

Wahyu Widhiarso, Ibnu Abdul Rosid and Rieska Ernawati
Jurnal Sistem dan Manajemen Industri 7 (1) 1 (2023)
https://doi.org/10.30656/jsmi.v7i1.5747

Advances in Engineering Research and Application

Tran Huu Danh, Bui Thanh Danh, Trieu Quy Huy, et al.
Lecture Notes in Networks and Systems, Advances in Engineering Research and Application 602 262 (2023)
https://doi.org/10.1007/978-3-031-22200-9_28

Multi-Objective Optimization of Turning Process by Fuca Method

Xuan Thinh Hoang
Strojnícky časopis - Journal of Mechanical Engineering 73 (1) 55 (2023)
https://doi.org/10.2478/scjme-2023-0005

Optimization of Technological Parameters when Plasma Nitriding the Gear Working Surface

Bui Thanh Danh and Le Hong Ky
Engineering, Technology & Applied Science Research 13 (3) 11006 (2023)
https://doi.org/10.48084/etasr.5946

Advances in Engineering Research and Application

Nguyen Hong Linh, Trieu Quy Huy, Tran Minh Tan, et al.
Lecture Notes in Networks and Systems, Advances in Engineering Research and Application 602 244 (2023)
https://doi.org/10.1007/978-3-031-22200-9_26

Combination of design of experiments and simple additive weighting methods: a new method for rapid multi-criteria decision making

Tran Van Dua
EUREKA: Physics and Engineering (1) 120 (2023)
https://doi.org/10.21303/2461-4262.2023.002733

Advances in Engineering Research and Application

Trieu Quy Huy, Tran Huu Danh, Bui Thanh Danh, et al.
Lecture Notes in Networks and Systems, Advances in Engineering Research and Application 602 699 (2023)
https://doi.org/10.1007/978-3-031-22200-9_74

Advances in Engineering Research and Application

Trieu Quy Huy, Nguyen Hong Linh, Tra n Huu Danh, et al.
Lecture Notes in Networks and Systems, Advances in Engineering Research and Application 602 227 (2023)
https://doi.org/10.1007/978-3-031-22200-9_24

Modeling and optimization in turning of PA66-GF30% and PA66 using multi-criteria decision-making (PSI, MABAC, and MAIRCA) methods: a comparative study

Sabrina Haoues, Mohamed Athmane Yallese, Salim Belhadi, Salim Chihaoui and Alper Uysal
The International Journal of Advanced Manufacturing Technology 124 (7-8) 2401 (2023)
https://doi.org/10.1007/s00170-022-10583-8

Applying Cocoso, Mabac, Mairca, Eamr, Topsis and Weight Determination Methods for Multi-Criteria Decision Making in Hole Turning Process

Duc Trung Do and Nhu-Tung Nguyen
Strojnícky časopis - Journal of Mechanical Engineering 72 (2) 15 (2022)
https://doi.org/10.2478/scjme-2022-0014

Improving the Efficiency of Grinding Process Using the Rubber-Pasted Grinding Wheel

Duc Trung Do, Xuan Thinh Hoang and Dang Ha Le
Strojnícky časopis - Journal of Mechanical Engineering 72 (1) 23 (2022)
https://doi.org/10.2478/scjme-2022-0003

Multi-Criteria Decision Making in the Milling Process Using the PARIS Method

H. K. Le
Engineering, Technology & Applied Science Research 12 (5) 9208 (2022)
https://doi.org/10.48084/etasr.5187

Comparison of Multi-Criteria Decision Making Methods Using The Same Data Standardization Method

Hoang Tien Dung, Duc Trung Do and Van Thien Nguyen
Strojnícky časopis - Journal of Mechanical Engineering 72 (2) 57 (2022)
https://doi.org/10.2478/scjme-2022-0016

Application of EDAS, MARCOS, TOPSIS, MOORA and PIV Methods for Multi-Criteria Decision Making in Milling Process

Do Duc Trung
Strojnícky časopis - Journal of Mechanical Engineering 71 (2) 69 (2021)
https://doi.org/10.2478/scjme-2021-0019