Design for additive manufacturing of composite materials and potential alloys: a review
Manufacturing Rev., 3 (2016) 11
Published online: 2016-07-05
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Optimization of Geometric Configurations in Polyurethane-Based Porous Structures: Mechanical Performance and Dynamic Property Evaluation
Mevlüt Yunus Kayacan, Ali Nadi Kaplan and Merdan OzkahramanPolymer-Plastics Technology and Materials 65 (2) 303 (2026)
https://doi.org/10.1080/25740881.2025.2595562
Emerging Material Systems and Alloy Design Strategies in Metal Additive Manufacturing: Current Trends and Future Directions
Humaira Rahman Tanjila, Md Shohag Rana and Abu Sayed Faisal AhmedScientia. Technology, Science and Society 3 (2) 63 (2026)
https://doi.org/10.59324/stss.2026.3(2).06
Artificial intelligence-driven approach to accelerate discovery of directed energy deposition of GRCop-42
Nathaniel W. Zuckschwerdt, Azza Fadhel, Aryan Deshwal, Janardhan Rao Doppa, Susmita Bose and Amit BandyopadhyayVirtual and Physical Prototyping 21 (1) (2026)
https://doi.org/10.1080/17452759.2026.2653277
A review on recent progress in light metal solid-phase additive manufacturing
Jiyu Li, Tianhao Yang, Siqi Liu, Yun Shi and Kai ZhaoMaterials Science and Technology 42 (7) 695 (2026)
https://doi.org/10.1177/02670836251314968
Heat-Resistant Powder Alloys in Additive Manufacturing: Materials, Application, and Perspectives
Progress in Physics of Metals 26 (4) (2025)https://doi.org/10.15407/ufm.26.04.863
Comparative study of mechanical behaviors of additively manufactured continuous fiber-reinforced thermoplastic composites undergoing flexural and mode I fracture
Yu-Chao Shih, Haibin Ning, Subhayu Sen and Selvum PillayJournal of Thermoplastic Composite Materials 38 (12) 4792 (2025)
https://doi.org/10.1177/08927057251344265
Analysis of Methods for Deposition of Barrier Coatings on Carbon Fiber for Metal Matrix Composites
N. A. Litovchenko, E. S. Shitova, A. V. Erokhina, F. V. Makarov and A. P. PonomarenkoInorganic Materials: Applied Research 16 (4) 1010 (2025)
https://doi.org/10.1134/S2075113325700959
3D Printing of Ti-6Al-4V Parts from Waste Material
Miguel Grande-Molina, Laura Calvo, Louison Poudelet, Roger Cardona, Caterina Chirico and Begoña FerrariKey Engineering Materials 1009 49 (2025)
https://doi.org/10.4028/p-u0mgQX
Design and manufacture of equine hand prosthesis by additive manufacturing
Bruno Benegra Denadai, José Aguiomar Foggiatto, Peterson Triches Dornbusch, Maria Fernanda Pioli Torres and Marco Antônio LuersenRapid Prototyping Journal 31 (1) 14 (2025)
https://doi.org/10.1108/RPJ-04-2024-0176
Adopting additive manufacturing: spotlight on sustainability and material utilization
Upender Punia, Sachin Dhull, Asad Habeeb, Ekta Antil, Deepak Dahiya, Deepak Gupta and Akash AhlawatGreen Materials 13 (4) 234 (2025)
https://doi.org/10.1680/jgrma.24.00165
Development of Continuous Fiber Reinforced Polymer Composites using In-situ Co-extrusion Towpreg Material Extrusion Process with Optimized Cooling and Evaluation of their Mechanical Performance and Quality
Nabeel Maqsood, Jawad Ullah, Marius Rimašauskas, Kateřina Skotnicová, Genrik Mordas, Conor McCrickard, Joamin Gonzalez-Gutierrez, Alistair McIlhagger and Edward ArcherJournal of Science: Advanced Materials and Devices 100966 (2025)
https://doi.org/10.1016/j.jsamd.2025.100966
Structure and particle size characteristics of heat-resistant nickel alloy powders
Z. A. Duriagina, I. A. Lemishka, V. Ye. Priakhin, A. V. Andreikiv and Yu. I. BoikoMetaloznavstvo ta obrobka metalìv 31 (4) 3 (2025)
https://doi.org/10.15407/mom2025.04.003
397 (2025)
https://doi.org/10.1007/978-981-97-6016-9_31
A comprehensive review on selective laser melting of aluminium matrix composites reinforced with silicon carbide
Priyank Dixit and Amit SuhaneProgress in Additive Manufacturing 10 (8) 4419 (2025)
https://doi.org/10.1007/s40964-024-00883-8
Effect of Process Parameters on Part Quality, Microstructure, and Mechanical Properties of a WC-Co-Hexagonal Boron Nitride Alloy Prepared by Laser Power Bed Fusion Process
Joseph Agyapong, Aleksander Czekanski and Solomon Boakye-YiadomJournal of Materials Engineering and Performance 33 (1) 410 (2024)
https://doi.org/10.1007/s11665-023-07976-5
Additive manufacturing of continuous carbon fiber reinforced polymer composites using materials extrusion process. Mechanical properties, process parameters, fracture analysis, challenges, and future prospect. A review
Nabeel Maqsood, Marius Rimašauskas, Morteza Ghobakhloo, Genrik Mordas and Kateřina SkotnicováAdvanced Composites and Hybrid Materials 7 (6) (2024)
https://doi.org/10.1007/s42114-024-01035-w
Effect of Carbon Nanotube Reinforcement on Creep and Recovery Behavior of Additively Manufactured Polymers: An Experimental and Prediction Study
Kamil Feratoğlu, İlyas İstif, Ömer Yunus Gümüş and Erol TürkeşArabian Journal for Science and Engineering 49 (11) 14927 (2024)
https://doi.org/10.1007/s13369-024-08855-4
214 (2024)
https://doi.org/10.1016/B978-0-323-96020-5.00286-7
Machine learning in polymer additive manufacturing: a review
Mohammad Hossein Nikooharf, Mohammadali Shirinbayan, Mahsa Arabkoohi, Nadia Bahlouli, Joseph Fitoussi and Khaled BenfrihaInternational Journal of Material Forming 17 (6) (2024)
https://doi.org/10.1007/s12289-024-01854-8
Additive manufacturing (3D printing) technologies for fiber-reinforced polymer composite materials: A review on fabrication methods and process parameters
Manickam Ramesh, Kanakaraj Niranjana, Ramasamy Bhoopathi and Lakshminarasimhan Rajeshkumare-Polymers 24 (1) (2024)
https://doi.org/10.1515/epoly-2023-0114
291 (2024)
https://doi.org/10.1016/B978-0-443-13623-8.00010-1
Synergistic reinforcement of nanofillers in biocomposites developed by additive manufacturing techniques
Jalaparthi Sai Krishna, Vijay Chaudhary, Jimmy Mehta, Paridhi Malhotra, Sumit Gupta and Pallav GuptaBiomass Conversion and Biorefinery 14 (13) 13691 (2024)
https://doi.org/10.1007/s13399-022-03395-z
Dissolution kinetics of Laves phase during homogenization heat treatment of additively manufactured Inconel 718 superalloy
Sajad Ghaemifar and Hamed MirzadehJournal of Materials Research and Technology (2023)
https://doi.org/10.1016/j.jmrt.2023.04.013
The effects of ripple amplitude on heat transfer and fluid flow of X-lattice corrugated honeycombs
JunJun Chen, GongNan Xie and HongBin YanScience China Technological Sciences 66 (12) 3412 (2023)
https://doi.org/10.1007/s11431-022-2378-2
Advances in Additive Manufacturing and Metal Joining
Kriti Srivastava and Yogesh KumarLecture Notes in Mechanical Engineering, Advances in Additive Manufacturing and Metal Joining 3 (2023)
https://doi.org/10.1007/978-981-19-7612-4_1
Wear prediction of 3D-printed acrylonitrile butadiene styrene-carbon nanotube nanocomposites at elevated temperatures
Kamil Feratoglu, Ilyas Istif and Omer Yunus GumusJournal of Polymer Engineering 43 (4) 318 (2023)
https://doi.org/10.1515/polyeng-2022-0225
204 (2023)
https://doi.org/10.1109/ICMIMT59138.2023.10199510
28 (2023)
https://doi.org/10.2174/9789815136715123010006
Investigation of TiB distribution characteristics on the microstructure of in situ TiB/Ti6Al4V-ELI manufactured by laser metal deposition
Paul Lekoadi, Monnamme Tlotleng, Charles Siyasiya, Bathusile Masina and W. du PreezMATEC Web of Conferences 388 03015 (2023)
https://doi.org/10.1051/matecconf/202338803015
3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers
Rebecca Damamme, Laurence Seveyrat, Ana Borta-Boyon, Van-Cuong Nguyen, Minh-Quyen Le and Pierre-Jean CottinetJournal of the European Ceramic Society (2023)
https://doi.org/10.1016/j.jeurceramsoc.2023.02.054
Ballistic performance of novel design of bulletproof plates inspired by biomimetic approaches
Mevlüt Yunus Kayacan and Ahmet ÜzünPolymers for Advanced Technologies 34 (1) 299 (2023)
https://doi.org/10.1002/pat.5888
Synthesis of Ti–Al Bimodal Powder for High Flowability Feedstock by Electrical Explosion of Wires
Marat Lerner, Alexander Pervikov, Elena Glazkova, et al.Metals 12 (3) 478 (2022)
https://doi.org/10.3390/met12030478
Advanced robotics and additive manufacturing of composites: towards a new era in Industry 4.0
Hetal Parmar, Tayyab Khan, Fausto Tucci, Rehan Umer and Pierpaolo CarloneMaterials and Manufacturing Processes 37 (5) 483 (2022)
https://doi.org/10.1080/10426914.2020.1866195
Colloidal Processing of Complex-Shaped ZrB2-Based Ultra-High-Temperature Ceramics: Progress and Prospects
Guoqian Liu, Changhai Yan and Hua JinMaterials 15 (8) 2886 (2022)
https://doi.org/10.3390/ma15082886
Advanced Materials
Ajit BeheraAdvanced Materials 667 (2022)
https://doi.org/10.1007/978-3-030-80359-9_20
High-Performance Composite Structures
Sumit Choudhary and Vidit GaurComposites Science and Technology, High-Performance Composite Structures 261 (2022)
https://doi.org/10.1007/978-981-16-7377-1_12
929 (2022)
https://doi.org/10.1109/ICARM54641.2022.9959104
An investigation into the current state of education in Design for Additive Manufacturing
Yuri Borgianni, Patrick Pradel, Aurora Berni, Martins Obi and Richard BibbJournal of Engineering Design 33 (7) 461 (2022)
https://doi.org/10.1080/09544828.2022.2102893
In‐situ curing of 3D printed freestanding thermosets
Chongjie Gao, Jingjing Qiu and Shiren WangJournal of Advanced Manufacturing and Processing 4 (3) (2022)
https://doi.org/10.1002/amp2.10114
High-Performance Composite Structures
Ruban Whenish, Rajkumar Velu, S. Anand Kumar and L. S. RamprasathComposites Science and Technology, High-Performance Composite Structures 25 (2022)
https://doi.org/10.1007/978-981-16-7377-1_2
Microstructural Development of Ti-6Al-4V Alloy via Powder Metallurgy and Laser Powder Bed Fusion
Alireza Dareh Baghi, Shahrooz Nafisi, Heike Ebendorff-Heidepriem and Reza GhomashchiMetals 12 (9) 1462 (2022)
https://doi.org/10.3390/met12091462
A review on fabrication of 3D printed biomaterials using optical methodologies for tissue engineering applications
Pauline John, Irene Rose Antony, Ruban Whenish and Arackal Narayanan JinoopProceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 236 (11) 1583 (2022)
https://doi.org/10.1177/09544119221122856
A bibliometric analysis of research in design for additive manufacturing
Martins Ugonna Obi, Patrick Pradel, Matt Sinclair and Richard BibbRapid Prototyping Journal 28 (5) 967 (2022)
https://doi.org/10.1108/RPJ-11-2020-0291
An Efficient Framework for Printability Assessment in Laser Powder Bed Fusion Metal Additive Manufacturing
Bing Zhang, Raiyan Seede, Lei Xue, et al.Additive Manufacturing 102018 (2021)
https://doi.org/10.1016/j.addma.2021.102018
1 (2021)
https://doi.org/10.1002/9781119560807.ch1
On the Impact of Additive Manufacturing Processes Complexity on Modelling
Panagiotis Stavropoulos, Panagis Foteinopoulos and Alexios PapapacharalampopoulosApplied Sciences 11 (16) 7743 (2021)
https://doi.org/10.3390/app11167743
A Review on Processing Routes, Properties, Applications, and Challenges of Titanium Metal Matrix Composite
Hrudayanjali Pathi, Tapan Kumar Mishri, Sasmita Rani Panigrahi, Bijayalaxmi Kuanar and Biswajit DalaiEast European Journal of Physics (3) 5 (2021)
https://doi.org/10.26565/2312-4334-2021-3-01
316L FFF binder development and debinding optimization
Xinfeng Kan, Dengcui Yang, Zhengzhi Zhao and Jiquan SunMaterials Research Express 8 (11) 116515 (2021)
https://doi.org/10.1088/2053-1591/ac3b15
20 (2021)
https://doi.org/10.1016/B978-0-12-819724-0.00059-8
Three-Dimensional Technology Applications in Maxillofacial Reconstructive Surgery: Current Surgical Implications
Yasmin Ghantous, Aysar Nashef, Aladdin Mohanna and Imad Abu-El-naajNanomaterials 10 (12) 2523 (2020)
https://doi.org/10.3390/nano10122523
Advances in Manufacturing Engineering
Esther T. Akinlabi, Ganiyat A. Soliu, R. M. Mahamood, et al.Lecture Notes in Mechanical Engineering, Advances in Manufacturing Engineering 555 (2020)
https://doi.org/10.1007/978-981-15-5753-8_51
Fiber Traction Printing: A 3D Printing Method of Continuous Fiber Reinforced Metal Matrix Composite
Xin Wang, Xiaoyong Tian, Qin Lian and Dichen LiChinese Journal of Mechanical Engineering 33 (1) (2020)
https://doi.org/10.1186/s10033-020-00447-1
How to Formulate for Structure and Texture via Medium of Additive Manufacturing-A Review
Azarmidokht Gholamipour-Shirazi, Michael-Alex Kamlow, Ian T. Norton and Tom MillsFoods 9 (4) 497 (2020)
https://doi.org/10.3390/foods9040497
Rapid consolidation of hydroxyapatite using intense millimeter-wave radiation
S.V. Egorov, A.G. Eremeev, V.V. Kholoptsev, I.V. Plotnikov, K.I. Rybakov and A.A. SorokinMaterials Today: Proceedings 25 349 (2020)
https://doi.org/10.1016/j.matpr.2019.12.081
ANISOTROPIC IMPACT TOUGHNNESS OF CHOPPED CARBON FIBER REINFORCED NYLON FABRICATED BY MATERIAL-EXTRUSION-BASED ADDITIVE MANUFACTURING
EVREN YASAAnadolu University Journal of Science and Technology-A Applied Sciences and Engineering (2019)
https://doi.org/10.18038/aubtda.498606
3D printing of layered mesoporous bioactive glass/sodium alginate-sodium alginate scaffolds with controllable dual-drug release behaviors
Shengyang Fu, Xiaoyu Du, Min Zhu, et al.Biomedical Materials 14 (6) 065011 (2019)
https://doi.org/10.1088/1748-605X/ab4166
Additive Manufacturing of Ceramic Products Based on Millimeter-Wave Heating
SV Egorov, AG Eremeev, VV Kholoptsev, et al.IOP Conference Series: Materials Science and Engineering 678 (1) 012022 (2019)
https://doi.org/10.1088/1757-899X/678/1/012022
Research Regarding Embedded Systems of Robotic Technology for Manufacturing of Hybrid Polymeric Composite Products
Catalin Jianu, Giuseppe Lamanna and Constantin Gheorghe OpranMaterials Science Forum 957 267 (2019)
https://doi.org/10.4028/www.scientific.net/MSF.957.267
Processability of SS316L powder - binder mixtures for vertical extrusion and deposition on table tests
Kedarnath Rane, Luca Di Landro and Matteo StranoPowder Technology 345 553 (2019)
https://doi.org/10.1016/j.powtec.2019.01.010
Additive Manufacturing of Emerging Materials
Eskandar Fereiduni, Mostafa Yakout and Mohamed ElbestawiAdditive Manufacturing of Emerging Materials 55 (2019)
https://doi.org/10.1007/978-3-319-91713-9_3
Aircraft Technology
Evren Yasa and Kıvılcım ErsoyAircraft Technology (2018)
https://doi.org/10.5772/intechopen.75628
INVESTIGATION OF CHARACTERISTICS OF SPECIAL POWDERS AND MATERIALS PRODUCED BY MEANS OF SELECTIVE LASER MELTING
A. Ph. IlyuschankaProceedings of the National Academy of Sciences of Belarus, Physical-Technical Series 63 (2) 150 (2018)
https://doi.org/10.29235/1561-8358-2018-63-2-150-160
Stability, mechanical and electronic properties of ceramic interphases in biomedical composites via first-principles calculations
ZhengYuan He, XiaoYu Chong, YeHua Jiang and Jing FengCeramics International (2018)
https://doi.org/10.1016/j.ceramint.2018.02.193
Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives
Joamin Gonzalez-Gutierrez, Santiago Cano, Stephan Schuschnigg, et al.Materials 11 (5) 840 (2018)
https://doi.org/10.3390/ma11050840
Comprehensive Composite Materials II
Monica FerrarisComprehensive Composite Materials II 293 (2018)
https://doi.org/10.1016/B978-0-12-803581-8.09997-5
Additive Manufacturing of High-performance Metals and Alloys - Modeling and Optimization
Haidong Zhang and Saniya LeBlancAdditive Manufacturing of High-performance Metals and Alloys - Modeling and Optimization (2018)
https://doi.org/10.5772/intechopen.75832
Design of ultra-lightweight and high-strength cellular structural composites inspired by biomimetics
Zhong Hu, Thiyagarajan Kaushik, Amrit Bhusal, et al.Composites Part B: Engineering (2017)
https://doi.org/10.1016/j.compositesb.2017.03.033