Production and 3D printing processing of bio-based thermoplastic filament
Manufacturing Rev., 4 (2017) 1
Published online: 2017-01-09
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Fabrication of High Strength Cellulose-Lignin Composite Film via Codissolution-Precipitation Method
Xin Fu, Jianmin Peng and Deshi YangJournal of Korea Technical Association of The Pulp and Paper Industry 58 (2) 39 (2026)
https://doi.org/10.7584/JKTAPPI.2026.4.58.2.39
Recent advancements in the additive manufacturing of fiber-reinforced polymeric composites
Mahmoud M. Farh, Arvydas Rimkus, Adas Meškėnas and Viktor GribniakREVIEWS ON ADVANCED MATERIALS SCIENCE 65 (1) (2026)
https://doi.org/10.1515/rams-2025-0228
Pharmaceutical Application of Carbohydrate-Based Composites in Fused Deposition Modeling
Kevin Matzick, Alena Komersová, Roman Svoboda, Jana Macháčková, Martin Bartoš and Barbora Skalická3D Printing and Additive Manufacturing 13 (2) 157 (2026)
https://doi.org/10.1089/3dp.2023.0353
1 (2026)
https://doi.org/10.1109/ACDSA67686.2026.11468225
Multi-objective optimization of sustainable performance in fused filament fabrication
Matheus C. Almeida, Francisco T.A. Barbosa, Lucas G. Oliveira, Luiz M. Coelho Junior and Rogério S. PeruchiComputers & Industrial Engineering 216 112001 (2026)
https://doi.org/10.1016/j.cie.2026.112001
Enhancing mechanical and morphological properties of PLA composites reinforced with Curcuma longa extraction residue via fused deposition modeling
Ganesh Nataraj, S. Ramesh Babu, Ramu Murugan and A. P. Senthil KumarProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 240 (2) 515 (2026)
https://doi.org/10.1177/09544062251381476
Realizing semicrystalline polymer physics across disparate processing scales: From desktop extrusion to large-format additive manufacturing
Daniel A. Heinze, Arit Das, Christopher B. Williams, Claire McIlroy, Amy M. Peterson and Michael J. BortnerProgress in Polymer Science 172 102053 (2026)
https://doi.org/10.1016/j.progpolymsci.2025.102053
Influence of Fiber Layer Stacking, Annealing at Different Pressures and Fiber Volume Fraction on Flexural Mechanical Properties of 3D Printed Reinforced Composites
Zeeshan Ali, Hui Mei, Qian Sun, Xiaojun Tan, Konstantinos Dassios and Bo CaoPolymer Composites 47 (S1) (2026)
https://doi.org/10.1002/pc.70811
PLA/Kahili Ginger Fiber Biocomposites Processed by Fused Filament Fabrication: Physical and Mechanical Characterization
Bruno Lourenço, Rita Serôdio, Ana Clara Marques, Raquel Galante, Ricardo Claudio and Célio G. Figueiredo‐PinaPolymer Composites (2026)
https://doi.org/10.1002/pc.71173
(2026)
https://doi.org/10.20334/2026-023-M
Printability of recycled feedstock for extrusion additive manufacturing
Matteo Strano, Daniele Farioli, Luca Angelo Di Landro and Valerio MussiAdvances in Materials and Processing Technologies 11 (1) 46 (2025)
https://doi.org/10.1080/2374068X.2023.2295651
3D-printed sustainable biocomposites via valorization of biomass: focus on challenges and their future perspectives
Ashish Soni, Sonu Kumar Gupta, Dhinakaran Veeman and Jitendra Kumar KatiyarEnvironmental Science and Pollution Research 32 (50) 28559 (2025)
https://doi.org/10.1007/s11356-025-37109-5
Exosome loaded 3D printed magnetic PLA constructs: a candidate for bone tissue engineering
Rihab Ksouri, Sedat Odabas and Atiye Seda Yar SağlamProgress in Additive Manufacturing 10 (1) 247 (2025)
https://doi.org/10.1007/s40964-024-00619-8
Physiochemical performance of electrospun PLA-lignin and PVA-lignin
C C. Odili, O. P. Gbenebour, O A Olanrewaju, T O Badaru and S. O. AdeosunJournal of Materials Science: Materials in Engineering 20 (1) (2025)
https://doi.org/10.1186/s40712-025-00218-7
Development and Characterization of Scented PLA-Based Biocomposites Reinforced with Spent Coffee Grounds and Lignin for FDM 3D Printing
Zeineb Siala, Ahmed Koubaa, Sofiane Guessasma, Nicolas Stephant, Ahmed Elloumi and Martin BeauregardPolymers 17 (21) 2836 (2025)
https://doi.org/10.3390/polym17212836
(2025)
https://doi.org/10.2139/ssrn.5223624
A short banana fiber—PLA filament for 3D printing: Development and characterization
Mohamed Shafeer P.P, Jeyaraj Pitchaimani and Mrityunjay DoddamaniPolymer Composites 46 (6) 4863 (2025)
https://doi.org/10.1002/pc.28519
Enhanced Mechanical Properties of CNT/Graphene Reinforced PLA-Based Composites Fabricated via Fused Deposition Modelling
G S Pradeep Kumar, R Keshavamurthy, Sajna P Panigrahi, Shijo Thomas, Thejaraju R, Gurumoorthy S Hebbar, C. Durga Prasad and Adem Abdirkadir AdenResults in Engineering 104472 (2025)
https://doi.org/10.1016/j.rineng.2025.104472
Comparative analysis of solvent-based and solvent-free (melting) methods for fabricating 3D-printed polycaprolactone-hydroxyapatite composite bone scaffolds: physicochemical/mechanical analyses and in vitro cytocompatibility
Brigita De Vega, Abir Dutta, Aisha Mumtaz, Bob C. Schroeder, Craig Gerrand, Ashleigh S. Boyd and Deepak M. KalaskarFrontiers in Bioengineering and Biotechnology 12 (2025)
https://doi.org/10.3389/fbioe.2024.1473777
Thermal interface polymer-based composites materials: a critical review
Mesum Abbas, Athanasia Amanda Septevani, Fitra Yurid, Ankit Joshi, Madhulika Gupta, Sanjay Mavinkere Rangappa, G. M. Madhu, Malinee Sriariyanun, Suchart Siengchin and P. BaranitharanMultiscale and Multidisciplinary Modeling, Experiments and Design 8 (3) (2025)
https://doi.org/10.1007/s41939-025-00787-2
A review on exploration of the mechanical characteristics of 3D-printed biocomposites fabricated by fused deposition modelling (FDM)
Prashant Anerao, Atul Kulkarni and Yashwant MundeRapid Prototyping Journal 30 (3) 430 (2024)
https://doi.org/10.1108/RPJ-04-2023-0150
A Systematic Review on the Technical Performance and Sustainability of 3D Printing Filaments Using Recycled Plastic
Iman Ibrahim, Ayat Gamal Ashour, Waleed Zeiada, Nisreen Salem and Mohamed AbdallahSustainability 16 (18) 8247 (2024)
https://doi.org/10.3390/su16188247
A response surface methodology investigation into the optimization of manufacturing time and quality for FFF 3D printed PLA parts
Abdurrahim TemizRapid Prototyping Journal 30 (10) 2007 (2024)
https://doi.org/10.1108/RPJ-01-2024-0004
Valorization of lignin for advanced material applications: a review
Rohan Shorey, Ayyoub Salaghi, Pedram Fatehi and Tizazu H. MekonnenRSC Sustainability 2 (4) 804 (2024)
https://doi.org/10.1039/D3SU00401E
Novel Softwood Lignin Esters as Advanced Filler to PLA for 3D Printing
Mahendra K. Mohan, Illia Krasnou, Tiit Lukk and Yevgen KarpichevACS Omega 9 (44) 44559 (2024)
https://doi.org/10.1021/acsomega.4c06680
A critical review of composite filaments for fused deposition modeling: Material properties, applications, and future directions
Arslan Kaptan and Fuat KartalEuropean Mechanical Science 8 (3) 199 (2024)
https://doi.org/10.26701/ems.1451829
56 (2024)
https://doi.org/10.1007/978-3-031-62684-5_6
Characteristics of 3D Printing Products Using PLA/Nanographite Nanocomposite Filaments
Faqih Fadillah, Heru Suryanto, Suprayitno Suprayitno, A. Taufiq, H. Susanto, H. Nur, M. Diantoro, M. Aziz and N.A.N.N. MalekBIO Web of Conferences 117 01016 (2024)
https://doi.org/10.1051/bioconf/202411701016
Advances in fused deposition modeling on process, process parameters, and multifaceted industrial application: a review
Michael Enyan, Jesse Nii Okai Amu-Darko, Eliasu Issaka and Olivier Joseph AbbanEngineering Research Express 6 (1) 012401 (2024)
https://doi.org/10.1088/2631-8695/ad32f6
79 (2024)
https://doi.org/10.1002/9781394197866.ch5
Evaluation of stress-controlled high-cycle fatigue characteristics in PLA-wood fused deposition modeling 3D-printed parts under bending loads
Morteza Kianifar, Mohammad Azadi, Fatemeh Heidari and Khalil Abdelrazek KhalilPLOS ONE 19 (4) e0300569 (2024)
https://doi.org/10.1371/journal.pone.0300569
Antimicrobial properties of 3D printed biocomposites with heat-treated wood flour using silver nanoparticles with leaf extract
Elif Yurttas, Nurten Tetik and Nadir AyrilmisWood Material Science & Engineering 18 (2) 663 (2023)
https://doi.org/10.1080/17480272.2022.2061869
Development of Biocomposite Filament for Fused Filament Fabrication from Soy Hulls and Soy Protein Isolate
Arup Dey, Md Mahbubur Rahman, Nita Yodo and David GrewellMaterials Today Communications 105316 (2023)
https://doi.org/10.1016/j.mtcomm.2023.105316
477 111 (2023)
https://doi.org/10.1007/978-3-031-33159-6_9
Recycling 3D Printed Residues for the Development of Disposable Paper-Based Electrochemical Sensors
Habdias A. Silva-Neto, Gerson F. Duarte-Junior, Danielly S. Rocha, et al.ACS Applied Materials & Interfaces (2023)
https://doi.org/10.1021/acsami.3c00370
Prospects of Natural Fiber-Reinforced Polymer Composites for Additive Manufacturing Applications: A Review
Sathish Kumar Adapa and JagadishJOM 75 (3) 920 (2023)
https://doi.org/10.1007/s11837-022-05670-w
Additive manufacturing of recycled plastics: a ‘techno-eco-efficiency’ assessment
Heshan Jayawardane, Ian J. Davies, J. R. Gamage, Michele John and Wahidul K. BiswasThe International Journal of Advanced Manufacturing Technology 126 (3-4) 1471 (2023)
https://doi.org/10.1007/s00170-023-11169-8
Investigation of ABS–oil palm fiber (Elaeis guineensis) composites filament as feedstock for fused deposition modeling
Mohd Nazri Ahmad, Mohamad Ridzwan Ishak, Mastura Mohammad Taha, Faizal Mustapha and Zulkiflle LemanRapid Prototyping Journal 29 (5) 897 (2023)
https://doi.org/10.1108/RPJ-05-2022-0164
Bioactive and Hemocompatible PLA/Lignin Bio-Composites: Assessment of In Vitro Antioxidant Activity for Biomedical Applications
Sadaf Mearaj, Ahmed Muhammad Ajaz, Tae Min Kim and Joon Weon ChoiACS Applied Bio Materials 6 (9) 3648 (2023)
https://doi.org/10.1021/acsabm.3c00210
Circular Economy-Driven Additive Manufacturing: A Model for Recycling PLA/Copper Composites Through Multi-Extrusion Processing
Žan Simon, Filip Stojcevski, Bhagya Dharmasiri, C. Luke Henderson and Negin AminiJournal of Industrial and Engineering Chemistry (2023)
https://doi.org/10.1016/j.jiec.2023.09.044
Lignin Valorization Problems (A Review)
E. I. EvstigneyevRussian Journal of Bioorganic Chemistry 49 (7) 1495 (2023)
https://doi.org/10.1134/S1068162023070713
Central composite disigns for optimization of the energy factor in 3D printing
Francisco Tiago Araújo Barbosa, Rogério Santana Peruchi and Paulo Rotella JuniorRevista de Gestão e Secretariado (Management and Administrative Professional Review) 14 (10) 17798 (2023)
https://doi.org/10.7769/gesec.v14i10.3000
A review of recent advances in bio-based polymer composite filaments for 3D printing
Nese Cakir Yigit and Idris KaragozPolymer-Plastics Technology and Materials 62 (9) 1077 (2023)
https://doi.org/10.1080/25740881.2023.2190799
Dimensional accuracy and impact resistance of 3D printed clay reinforced with scrap polymer powder
Mattia Mele, Giampaolo Campana, Gregorio Pisaneschi, Luciano De Martino and Michele RicciarelliRapid Prototyping Journal 29 (7) 1510 (2023)
https://doi.org/10.1108/RPJ-10-2022-0361
Development of Composites of PLA Filled with Different Amounts of Rice Husk Fibers for Fused Deposition Modeling
Daniel F. Pereira, A.C. Branco, Ricardo Cláudio, Ana C. Marques and C. G. Figueiredo-PinaJournal of Natural Fibers 20 (1) (2023)
https://doi.org/10.1080/15440478.2022.2162183
FDM-based additive manufacturing of recycled thermoplastics and associated composites
Vishal Mishra, Sushant Negi and Simanchal KarJournal of Material Cycles and Waste Management 25 (2) 758 (2023)
https://doi.org/10.1007/s10163-022-01588-2
Tensile properties of sandwich-designed carbon fiber filled PLA prepared via multi-material additive layered manufacturing and post-annealing treatment
Zhaogui Wang, Xiuzeng Yin and Lihan WangInternational Polymer Processing 38 (3) 343 (2023)
https://doi.org/10.1515/ipp-2022-4283
A comprehensive review on natural fillers reinforced polymer composites using fused deposition modeling
Ramesh Periyasamy, Mohit Hemanth Kumar, Sanjay Mavinkere Rangappa and Suchart SiengchinPolymer Composites 44 (7) 3715 (2023)
https://doi.org/10.1002/pc.27369
Enhanced mechanical characteristics of polylactic acid/tamarind kernel filler green composite filament for 3D printing
J. Nagarjun, J. Kanchana, G. Rajeshkumar and A. Anto DilipPolymer Composites 44 (11) 7925 (2023)
https://doi.org/10.1002/pc.27676
3D printing acrylated epoxidized soybean oil reinforced with functionalized cellulose by UV curing
Zengshe Liu, Daniel A. Knetzer, Jifu Wang, Fuxiang Chu, Chuanwei Lu and Paul D. CalvertJournal of Applied Polymer Science 139 (4) (2022)
https://doi.org/10.1002/app.51561
Materials Requirements in Fused Filament Fabrication: A Framework for the Design of Next‐Generation 3D Printable Thermoplastics and Composites
Antonella SolaMacromolecular Materials and Engineering 307 (10) (2022)
https://doi.org/10.1002/mame.202200197
Production and Assessment of Poly(Lactic Acid) Matrix Composites Reinforced with Regenerated Cellulose Fibres for Fused Deposition Modelling
Christian Gauss, Kim L. Pickering, Joshua Tshuma and John McDonald-WharryPolymers 14 (19) 3991 (2022)
https://doi.org/10.3390/polym14193991
Synthesis and fabrication of biobased thermoplastic polyurethane filament for FDM 3D printing
Eun Joo Shin, Yang Sook Jung, Hyeong Yeol Choi and Sunhee LeeJournal of Applied Polymer Science 139 (40) (2022)
https://doi.org/10.1002/app.52959
Mechanical, Dynamic-Mechanical, Thermal and Decomposition Behavior of 3D-Printed PLA Reinforced with CaCO3 Fillers from Natural Resources
Cristina Pavon, Miguel Aldas, María Dolores Samper, et al.Polymers 14 (13) 2646 (2022)
https://doi.org/10.3390/polym14132646
Properties of poly(lactic acid)/walnut shell/hydroxyapatite composites prepared with fused deposition modeling
Xiaohui Song, Wenfang Guan, Huadong Qin, et al.Scientific Reports 12 (1) (2022)
https://doi.org/10.1038/s41598-022-15622-8
22 1119 (2022)
https://doi.org/10.2749/nanjing.2022.1119
Fused Filament Fabrication 3D Printing: Quantification of Exposure to Airborne Particles
Stratos Saliakas, Panagiotis Karayannis, Ioannis Kokkinopoulos, et al.Journal of Composites Science 6 (5) 119 (2022)
https://doi.org/10.3390/jcs6050119
A Review of Polymer-Based Materials for Fused Filament Fabrication (FFF): Focus on Sustainability and Recycled Materials
Daniela Fico, Daniela Rizzo, Raffaele Casciaro and Carola Esposito CorcionePolymers 14 (3) 465 (2022)
https://doi.org/10.3390/polym14030465
COVID-19 Biomedical Plastics Wastes—Challenges and Strategies for Curbing the Environmental Disaster
Siddharthan Selvaraj, Somasundaram Prasadh, Shivkanya Fuloria, et al.Sustainability 14 (11) 6466 (2022)
https://doi.org/10.3390/su14116466
Application of Taguchi Method to Optimize the Parameter of Fused Deposition Modeling (FDM) Using Oil Palm Fiber Reinforced Thermoplastic Composites
Mohd Nazri Ahmad, Mohamad Ridzwan Ishak, Mastura Mohammad Taha, et al.Polymers 14 (11) 2140 (2022)
https://doi.org/10.3390/polym14112140
LIGNIN VALORIZATION PROBLEMS
Eduard Ivanovich Evstigneyevchemistry of plant raw material (1) 11 (2022)
https://doi.org/10.14258/jcprm.2022019211
Lignin Extraction and Characterization from Oil Palm Empty Fruit Bunches (Opefb) Using Soda and Dioxane Treatments for Polylactic Acid (Pla) Bio-Composites
Mohamad Shahrizad Pairon, Nurul Amirah Abd Rahman, Fathilah Ali, Hazleen Anuar and Jonghwan SuhrSSRN Electronic Journal (2022)
https://doi.org/10.2139/ssrn.4190857
A Survey of the Influence of Process Parameters on Mechanical Properties of Fused Deposition Modeling Parts
Ge Gao, Fan Xu, Jiangmin Xu, Guanghai Tang and Zhenyu LiuMicromachines 13 (4) 553 (2022)
https://doi.org/10.3390/mi13040553
Increased strength in carbon-poly(ether ether ketone) composites from material extrusion with rapid microwave post processing
Jia-Ruey Ai, Siyuan Li and Bryan D. VogtAdditive Manufacturing 103209 (2022)
https://doi.org/10.1016/j.addma.2022.103209
(2022)
https://doi.org/10.21203/rs.3.rs-2164695/v1
Advances of Science and Technology
Menberu Zeleke Shiferaw and Hailu Shimels GebremedhenLecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, Advances of Science and Technology 412 243 (2022)
https://doi.org/10.1007/978-3-030-93712-6_17
Comparing the Mechanical and Thermal Properties of Polylactic Acid/Organosolv Lignin Biocomposites Made of Different Biomass for 3D Printing Applications
J. O. Obielodan, M. Delwiche, D. Clark, et al.Journal of Engineering Materials and Technology 144 (2) (2022)
https://doi.org/10.1115/1.4052922
Fully 3D‐Printed, Ultrathin Capacitors via Multi‐Material Microsputtering
Yosef S. Kornbluth, Lalitha Parameswaran, Richard Mathews, Livia M. Racz and Luis F. Velásquez‐GarcíaAdvanced Materials Technologies 7 (8) (2022)
https://doi.org/10.1002/admt.202200097
Fused deposition modeling: process, materials, parameters, properties, and applications
Kumaresan Rajan, Mahendran Samykano, Kumaran Kadirgama, Wan Sharuzi Wan Harun and Md. Mustafizur RahmanThe International Journal of Advanced Manufacturing Technology 120 (3-4) 1531 (2022)
https://doi.org/10.1007/s00170-022-08860-7
A Review on Filament Materials for Fused Filament Fabrication
Arup Dey, Isnala Nanjin Roan Eagle and Nita YodoJournal of Manufacturing and Materials Processing 5 (3) 69 (2021)
https://doi.org/10.3390/jmmp5030069
3D Printing of Plant-Derived Compounds and a Proposed Nozzle Design for the More Effective 3D FDM Printing
Vedant Sharma, Hamid Roozbahani, Marjan Alizadeh and Heikki HandroosIEEE Access 9 57107 (2021)
https://doi.org/10.1109/ACCESS.2021.3071459
Preparation of Chemically Modified Lignin-Reinforced PLA Biocomposites and Their 3D Printing Performance
Seo-Hwa Hong, Jin Hwan Park, Oh Young Kim and Seok-Ho HwangPolymers 13 (4) 667 (2021)
https://doi.org/10.3390/polym13040667
Homogeneous distribution of lignin/graphene fillers with enhanced interlayer adhesion for 3D printing filament
Denesh Mohan, Afifah Nabilah Bakir, Mohd Shaiful Sajab, Saiful Bahari Bakarudin, Nurul Nasuha Mansor, Rasidi Roslan and Hatika KacoPolymer Composites 42 (5) 2408 (2021)
https://doi.org/10.1002/pc.25987
Mechanical and Physicochemical Properties of 3D-Printed Agave Fibers/Poly(lactic) Acid Biocomposites
Valeria Figueroa-Velarde, Tania Diaz-Vidal, Erick Omar Cisneros-López, et al.Materials 14 (11) 3111 (2021)
https://doi.org/10.3390/ma14113111
Sustainable Materials for Fused Deposition Modeling 3D Printing Applications
Jennifer P. Rett, Yannick L. Traore and Emmanuel A. HoAdvanced Engineering Materials 23 (7) (2021)
https://doi.org/10.1002/adem.202001472
Fused deposition modeling of poly (lactic acid)/almond shell composite filaments
Xiaohui Song, Wei He, Peiqi Chen, Qingsong Wei, Jingxian Wen and Guorui XiaoPolymer Composites 42 (2) 899 (2021)
https://doi.org/10.1002/pc.25874
Evaluating machining performance of AlSI 1014 steel using gingelly oil as cutting fluid
Alam Radhika, Shailesh Rao A and Yogesh K BAustralian Journal of Mechanical Engineering 19 (4) 445 (2021)
https://doi.org/10.1080/14484846.2019.1636517
107 (2021)
https://doi.org/10.1002/9781119641803.ch8
Films Based on Thermoplastic Starch Blended with Pine Resin Derivatives for Food Packaging
Cristina Pavon, Miguel Aldas, Juan López-Martínez, Joaquín Hernández-Fernández and Marina Patricia ArrietaFoods 10 (6) 1171 (2021)
https://doi.org/10.3390/foods10061171
Extrusion-Based 3D Printing Applications of PLA Composites: A Review
Eda Hazal Tümer and Husnu Yildirim ErbilCoatings 11 (4) 390 (2021)
https://doi.org/10.3390/coatings11040390
Modelling the Process of Fused Deposition Modelling and the Effect of Temperature on the Mechanical, Roughness, and Porosity Properties of Resulting Composite Products
K. Abouzaid, D. Bassir, S. Guessasma and H. YueMechanics of Composite Materials 56 (6) 805 (2021)
https://doi.org/10.1007/s11029-021-09925-6
Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing
Maria Morales, Cindy Atencio Martinez, Alejandro Maranon, Camilo Hernandez, Veronique Michaud and Alicia PorrasPolymers 13 (7) 1067 (2021)
https://doi.org/10.3390/polym13071067
Fused Deposition Modeling Based 3D Printing
Vijay Tambrallimath, R. Keshavamurthy, Arun Patil and H. AdarshaMaterials Forming, Machining and Tribology, Fused Deposition Modeling Based 3D Printing 151 (2021)
https://doi.org/10.1007/978-3-030-68024-4_8
Investigating the Mechanical Behavior of 3D Printed PLA-Coco Coir Composites
Paul Eric C. Maglalang, Blessie A. Basilia and Araceli Magsino MonsadaMaterials Science Forum 1046 125 (2021)
https://doi.org/10.4028/www.scientific.net/MSF.1046.125
Current State and Challenges of Natural Fibre-Reinforced Polymer Composites as Feeder in FDM-Based 3D Printing
Nishata Royan Rajendran Royan, Jie Sheng Leong, Wai Nam Chan, Jie Ren Tan and Zainon Sharmila Binti ShamsuddinPolymers 13 (14) 2289 (2021)
https://doi.org/10.3390/polym13142289
Poly(l-lactic acid)/alkali lignin composites: properties, biocompatibility, cytotoxicity and antimicrobial behavior
A. Bužarovska, J. Blazevska-Gilev, B. T. Pérez-Martnez, et al.Journal of Materials Science 56 (24) 13785 (2021)
https://doi.org/10.1007/s10853-021-06185-6
Antifouling performance of copper-containing fused filament fabrication (FFF) 3-D printing polymer filaments for marine applications
R. Piola, M. Leary, R. Santander and J. ShimetaBiofouling 37 (2) 206 (2021)
https://doi.org/10.1080/08927014.2021.1892085
Open Source Filament Diameter Sensor for Recycling, Winding, and Additive Manufacturing Machines
Aliaksei Petsiuk and Joshua M. PearceJournal of Manufacturing Science and Engineering 143 (10) (2021)
https://doi.org/10.1115/1.4050762
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saad Saleh Alghamdi, Sabu John, Namita Roy Choudhury and Naba K. DuttaPolymers 13 (5) 753 (2021)
https://doi.org/10.3390/polym13050753
3D printing filament as a second life of waste plastics—a review
Katarzyna Mikula, Dawid Skrzypczak, Grzegorz Izydorczyk, et al.Environmental Science and Pollution Research 28 (10) 12321 (2021)
https://doi.org/10.1007/s11356-020-10657-8
3D Printing of Okara Ink: The Effect of Particle Size on the Printability
Cheng Pau Lee, Masaki Takahashi, Satoshi Arai, Chi-Lik Ken Lee and Michinao HashimotoACS Food Science & Technology 1 (11) 2053 (2021)
https://doi.org/10.1021/acsfoodscitech.1c00236
Microwave Hydrophobized Lignin with Antioxidant Activity for Fused Filament Fabrication
Jenevieve Yao, Karin Odelius and Minna HakkarainenACS Applied Polymer Materials 3 (7) 3538 (2021)
https://doi.org/10.1021/acsapm.1c00438
On the Tensile Behaviour of Bio-Sourced 3D-Printed Structures from a Microstructural Perspective
Sofiane Guessasma, Sofiane Belhabib and Abdullah AltinPolymers 12 (5) 1060 (2020)
https://doi.org/10.3390/polym12051060
An Overview of Additive Manufacturing of Polymers and Associated Composites
Shukantu Dev Nath and Sabrina NilufarPolymers 12 (11) 2719 (2020)
https://doi.org/10.3390/polym12112719
Effects of the infill pattern on mechanical properties of fused layer modeling (FLM) 3D printed wood/polylactic acid (PLA) composites
S. Kain, J. V. Ecker, A. Haider, M. Musso and A. PetutschniggEuropean Journal of Wood and Wood Products 78 (1) 65 (2020)
https://doi.org/10.1007/s00107-019-01473-0
Deterioration of the Mechanical Properties of FFF 3D-Printed PLA Structures
Asahi Yonezawa and Akira YamadaInventions 6 (1) 1 (2020)
https://doi.org/10.3390/inventions6010001
Use of Biomaterials for 3D Printing by Fused Deposition Modeling Technique: A Review
Sanjita Wasti and Sushil AdhikariFrontiers in Chemistry 8 (2020)
https://doi.org/10.3389/fchem.2020.00315
Material Extrusion Additive Manufacturing of Wood and Lignocellulosic Filled Composites
Meghan E. Lamm, Lu Wang, Vidya Kishore, et al.Polymers 12 (9) 2115 (2020)
https://doi.org/10.3390/polym12092115
Implementing FDM 3D Printing Strategies Using Natural Fibers to Produce Biomass Composite
Waleed Ahmed, Fady Alnajjar, Essam Zaneldin, et al.Materials 13 (18) 4065 (2020)
https://doi.org/10.3390/ma13184065
Direct Ink Writing of Fully Bio-Based Liquid Crystalline Lignin/Hydroxypropyl Cellulose Aqueous Inks: Optimization of Formulations and Printing Parameters
Lisa-Sophie Ebers and Marie-Pierre LaborieACS Applied Bio Materials 3 (10) 6897 (2020)
https://doi.org/10.1021/acsabm.0c00800