EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Manufacturing Rev., 4 (2017) 1 Article references
Error
  • The authentification system partialy failed, sorry for the inconvenience. Please try again later.

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

A short banana fiber—PLA filament for 3D printing: Development and characterization

Mohamed Shafeer P.P, Jeyaraj Pitchaimani and Mrityunjay Doddamani
Polymer Composites 46 (6) 4863 (2025)
https://doi.org/10.1002/pc.28519

Enhanced Mechanical Properties of CNT/Graphene Reinforced PLA-Based Composites Fabricated via Fused Deposition Modelling

G S Pradeep Kumar, R Keshavamurthy, Sajna P Panigrahi, Shijo Thomas, Thejaraju R, Gurumoorthy S Hebbar, C. Durga Prasad and Adem Abdirkadir Aden
Results in Engineering 104472 (2025)
https://doi.org/10.1016/j.rineng.2025.104472

Printability of recycled feedstock for extrusion additive manufacturing

Matteo Strano, Daniele Farioli, Luca Angelo Di Landro and Valerio Mussi
Advances in Materials and Processing Technologies 11 (1) 46 (2025)
https://doi.org/10.1080/2374068X.2023.2295651

Exosome loaded 3D printed magnetic PLA constructs: a candidate for bone tissue engineering

Rihab Ksouri, Sedat Odabas and Atiye Seda Yar Sağlam
Progress in Additive Manufacturing 10 (1) 247 (2025)
https://doi.org/10.1007/s40964-024-00619-8

3D-printed sustainable biocomposites via valorization of biomass: focus on challenges and their future perspectives

Ashish Soni, Sonu Kumar Gupta, Dhinakaran Veeman and Jitendra Kumar Katiyar
Environmental Science and Pollution Research (2025)
https://doi.org/10.1007/s11356-025-37109-5

Comparative analysis of solvent-based and solvent-free (melting) methods for fabricating 3D-printed polycaprolactone-hydroxyapatite composite bone scaffolds: physicochemical/mechanical analyses and in vitro cytocompatibility

Brigita De Vega, Abir Dutta, Aisha Mumtaz, Bob C. Schroeder, Craig Gerrand, Ashleigh S. Boyd and Deepak M. Kalaskar
Frontiers in Bioengineering and Biotechnology 12 (2025)
https://doi.org/10.3389/fbioe.2024.1473777

Realizing Semicrystalline Polymer Physics across Disparate Processing Scales: From Desktop Extrusion to Large-format Additive Manufacturing

Daniel A. Heinze, Arit Das, Christopher B. Williams, Claire McIlroy, Amy M. Peterson and Michael J. Bortner
Progress in Polymer Science 102053 (2025)
https://doi.org/10.1016/j.progpolymsci.2025.102053

Physiochemical performance of electrospun PLA-lignin and PVA-lignin

C C. Odili, O. P. Gbenebour, O A Olanrewaju, T O Badaru and S. O. Adeosun
Journal of Materials Science: Materials in Engineering 20 (1) (2025)
https://doi.org/10.1186/s40712-025-00218-7

Thermal interface polymer-based composites materials: a critical review

Mesum Abbas, Athanasia Amanda Septevani, Fitra Yurid, Ankit Joshi, Madhulika Gupta, Sanjay Mavinkere Rangappa, G. M. Madhu, Malinee Sriariyanun, Suchart Siengchin and P. Baranitharan
Multiscale and Multidisciplinary Modeling, Experiments and Design 8 (3) (2025)
https://doi.org/10.1007/s41939-025-00787-2

Development and Characterization of Scented PLA-Based Biocomposites Reinforced with Spent Coffee Grounds and Lignin for FDM 3D Printing

Zeineb Siala, Ahmed Koubaa, Sofiane Guessasma, Nicolas Stephant, Ahmed Elloumi and Martin Beauregard
Polymers 17 (21) 2836 (2025)
https://doi.org/10.3390/polym17212836

Enhancing mechanical and morphological properties of PLA composites reinforced with Curcuma longa extraction residue via fused deposition modeling

Ganesh Nataraj, S. Ramesh Babu, Ramu Murugan and A. P. Senthil Kumar
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2025)
https://doi.org/10.1177/09544062251381476

A response surface methodology investigation into the optimization of manufacturing time and quality for FFF 3D printed PLA parts

Abdurrahim Temiz
Rapid Prototyping Journal 30 (10) 2007 (2024)
https://doi.org/10.1108/RPJ-01-2024-0004

A Systematic Review on the Technical Performance and Sustainability of 3D Printing Filaments Using Recycled Plastic

Iman Ibrahim, Ayat Gamal Ashour, Waleed Zeiada, Nisreen Salem and Mohamed Abdallah
Sustainability 16 (18) 8247 (2024)
https://doi.org/10.3390/su16188247

Pharmaceutical Application of Carbohydrate-Based Composites in Fused Deposition Modeling

Kevin Matzick, Alena Komersová, Roman Svoboda, Jana Macháčková, Martin Bartoš and Barbora Skalická
3D Printing and Additive Manufacturing (2024)
https://doi.org/10.1089/3dp.2023.0353

Evaluation of stress-controlled high-cycle fatigue characteristics in PLA-wood fused deposition modeling 3D-printed parts under bending loads

Morteza Kianifar, Mohammad Azadi, Fatemeh Heidari and Khalil Abdelrazek Khalil
PLOS ONE 19 (4) e0300569 (2024)
https://doi.org/10.1371/journal.pone.0300569

A critical review of composite filaments for fused deposition modeling: Material properties, applications, and future directions

Arslan Kaptan and Fuat Kartal
European Mechanical Science 8 (3) 199 (2024)
https://doi.org/10.26701/ems.1451829

A review on exploration of the mechanical characteristics of 3D-printed biocomposites fabricated by fused deposition modelling (FDM)

Prashant Anerao, Atul Kulkarni and Yashwant Munde
Rapid Prototyping Journal 30 (3) 430 (2024)
https://doi.org/10.1108/RPJ-04-2023-0150

Novel Softwood Lignin Esters as Advanced Filler to PLA for 3D Printing

Mahendra K. Mohan, Illia Krasnou, Tiit Lukk and Yevgen Karpichev
ACS Omega 9 (44) 44559 (2024)
https://doi.org/10.1021/acsomega.4c06680

Advances in fused deposition modeling on process, process parameters, and multifaceted industrial application: a review

Michael Enyan, Jesse Nii Okai Amu-Darko, Eliasu Issaka and Olivier Joseph Abban
Engineering Research Express 6 (1) 012401 (2024)
https://doi.org/10.1088/2631-8695/ad32f6

Valorization of lignin for advanced material applications: a review

Rohan Shorey, Ayyoub Salaghi, Pedram Fatehi and Tizazu H. Mekonnen
RSC Sustainability 2 (4) 804 (2024)
https://doi.org/10.1039/D3SU00401E

Characteristics of 3D Printing Products Using PLA/Nanographite Nanocomposite Filaments

Faqih Fadillah, Heru Suryanto, Suprayitno Suprayitno, A. Taufiq, H. Susanto, H. Nur, M. Diantoro, M. Aziz and N.A.N.N. Malek
BIO Web of Conferences 117 01016 (2024)
https://doi.org/10.1051/bioconf/202411701016

Circular Economy-Driven Additive Manufacturing: A Model for Recycling PLA/Copper Composites Through Multi-Extrusion Processing

Žan Simon, Filip Stojcevski, Bhagya Dharmasiri, C. Luke Henderson and Negin Amini
Journal of Industrial and Engineering Chemistry (2023)
https://doi.org/10.1016/j.jiec.2023.09.044

Central composite disigns for optimization of the energy factor in 3D printing

Francisco Tiago Araújo Barbosa, Rogério Santana Peruchi and Paulo Rotella Junior
Revista de Gestão e Secretariado (Management and Administrative Professional Review) 14 (10) 17798 (2023)
https://doi.org/10.7769/gesec.v14i10.3000

Development of Composites of PLA Filled with Different Amounts of Rice Husk Fibers for Fused Deposition Modeling

Daniel F. Pereira, A.C. Branco, Ricardo Cláudio, Ana C. Marques and C. G. Figueiredo-Pina
Journal of Natural Fibers 20 (1) (2023)
https://doi.org/10.1080/15440478.2022.2162183

A review of recent advances in bio-based polymer composite filaments for 3D printing

Nese Cakir Yigit and Idris Karagoz
Polymer-Plastics Technology and Materials 62 (9) 1077 (2023)
https://doi.org/10.1080/25740881.2023.2190799

Dimensional accuracy and impact resistance of 3D printed clay reinforced with scrap polymer powder

Mattia Mele, Giampaolo Campana, Gregorio Pisaneschi, Luciano De Martino and Michele Ricciarelli
Rapid Prototyping Journal 29 (7) 1510 (2023)
https://doi.org/10.1108/RPJ-10-2022-0361

Additive manufacturing of recycled plastics: a ‘techno-eco-efficiency’ assessment

Heshan Jayawardane, Ian J. Davies, J. R. Gamage, Michele John and Wahidul K. Biswas
The International Journal of Advanced Manufacturing Technology 126 (3-4) 1471 (2023)
https://doi.org/10.1007/s00170-023-11169-8

Enhanced mechanical characteristics of polylactic acid/tamarind kernel filler green composite filament for 3D printing

J. Nagarjun, J. Kanchana, G. Rajeshkumar and A. Anto Dilip
Polymer Composites 44 (11) 7925 (2023)
https://doi.org/10.1002/pc.27676

A comprehensive review on natural fillers reinforced polymer composites using fused deposition modeling

Ramesh Periyasamy, Mohit Hemanth Kumar, Sanjay Mavinkere Rangappa and Suchart Siengchin
Polymer Composites 44 (7) 3715 (2023)
https://doi.org/10.1002/pc.27369

Tensile properties of sandwich-designed carbon fiber filled PLA prepared via multi-material additive layered manufacturing and post-annealing treatment

Zhaogui Wang, Xiuzeng Yin and Lihan Wang
International Polymer Processing 38 (3) 343 (2023)
https://doi.org/10.1515/ipp-2022-4283

Investigation of ABS–oil palm fiber (Elaeis guineensis) composites filament as feedstock for fused deposition modeling

Mohd Nazri Ahmad, Mohamad Ridzwan Ishak, Mastura Mohammad Taha, Faizal Mustapha and Zulkiflle Leman
Rapid Prototyping Journal 29 (5) 897 (2023)
https://doi.org/10.1108/RPJ-05-2022-0164

Antimicrobial properties of 3D printed biocomposites with heat-treated wood flour using silver nanoparticles with leaf extract

Elif Yurttas, Nurten Tetik and Nadir Ayrilmis
Wood Material Science & Engineering 18 (2) 663 (2023)
https://doi.org/10.1080/17480272.2022.2061869

FDM-based additive manufacturing of recycled thermoplastics and associated composites

Vishal Mishra, Sushant Negi and Simanchal Kar
Journal of Material Cycles and Waste Management 25 (2) 758 (2023)
https://doi.org/10.1007/s10163-022-01588-2

Development of Biocomposite Filament for Fused Filament Fabrication from Soy Hulls and Soy Protein Isolate

Arup Dey, Md Mahbubur Rahman, Nita Yodo and David Grewell
Materials Today Communications 105316 (2023)
https://doi.org/10.1016/j.mtcomm.2023.105316

Recycling 3D Printed Residues for the Development of Disposable Paper-Based Electrochemical Sensors

Habdias A. Silva-Neto, Gerson F. Duarte-Junior, Danielly S. Rocha, et al.
ACS Applied Materials & Interfaces (2023)
https://doi.org/10.1021/acsami.3c00370

Bioactive and Hemocompatible PLA/Lignin Bio-Composites: Assessment of In Vitro Antioxidant Activity for Biomedical Applications

Sadaf Mearaj, Ahmed Muhammad Ajaz, Tae Min Kim and Joon Weon Choi
ACS Applied Bio Materials 6 (9) 3648 (2023)
https://doi.org/10.1021/acsabm.3c00210

Properties of poly(lactic acid)/walnut shell/hydroxyapatite composites prepared with fused deposition modeling

Xiaohui Song, Wenfang Guan, Huadong Qin, et al.
Scientific Reports 12 (1) (2022)
https://doi.org/10.1038/s41598-022-15622-8

Fused deposition modeling: process, materials, parameters, properties, and applications

Kumaresan Rajan, Mahendran Samykano, Kumaran Kadirgama, Wan Sharuzi Wan Harun and Md. Mustafizur Rahman
The International Journal of Advanced Manufacturing Technology 120 (3-4) 1531 (2022)
https://doi.org/10.1007/s00170-022-08860-7

Fully 3D‐Printed, Ultrathin Capacitors via Multi‐Material Microsputtering

Yosef S. Kornbluth, Lalitha Parameswaran, Richard Mathews, Livia M. Racz and Luis F. Velásquez‐García
Advanced Materials Technologies 7 (8) (2022)
https://doi.org/10.1002/admt.202200097

Mechanical, Dynamic-Mechanical, Thermal and Decomposition Behavior of 3D-Printed PLA Reinforced with CaCO3 Fillers from Natural Resources

Cristina Pavon, Miguel Aldas, María Dolores Samper, et al.
Polymers 14 (13) 2646 (2022)
https://doi.org/10.3390/polym14132646

Fused Filament Fabrication 3D Printing: Quantification of Exposure to Airborne Particles

Stratos Saliakas, Panagiotis Karayannis, Ioannis Kokkinopoulos, et al.
Journal of Composites Science 6 (5) 119 (2022)
https://doi.org/10.3390/jcs6050119

Synthesis and fabrication of biobased thermoplastic polyurethane filament for FDM 3D printing

Eun Joo Shin, Yang Sook Jung, Hyeong Yeol Choi and Sunhee Lee
Journal of Applied Polymer Science 139 (40) (2022)
https://doi.org/10.1002/app.52959

Production and Assessment of Poly(Lactic Acid) Matrix Composites Reinforced with Regenerated Cellulose Fibres for Fused Deposition Modelling

Christian Gauss, Kim L. Pickering, Joshua Tshuma and John McDonald-Wharry
Polymers 14 (19) 3991 (2022)
https://doi.org/10.3390/polym14193991

A Survey of the Influence of Process Parameters on Mechanical Properties of Fused Deposition Modeling Parts

Ge Gao, Fan Xu, Jiangmin Xu, Guanghai Tang and Zhenyu Liu
Micromachines 13 (4) 553 (2022)
https://doi.org/10.3390/mi13040553

A Review of Polymer-Based Materials for Fused Filament Fabrication (FFF): Focus on Sustainability and Recycled Materials

Daniela Fico, Daniela Rizzo, Raffaele Casciaro and Carola Esposito Corcione
Polymers 14 (3) 465 (2022)
https://doi.org/10.3390/polym14030465

Advances of Science and Technology

Menberu Zeleke Shiferaw and Hailu Shimels Gebremedhen
Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, Advances of Science and Technology 412 243 (2022)
https://doi.org/10.1007/978-3-030-93712-6_17

Comparing the Mechanical and Thermal Properties of Polylactic Acid/Organosolv Lignin Biocomposites Made of Different Biomass for 3D Printing Applications

J. O. Obielodan, M. Delwiche, D. Clark, et al.
Journal of Engineering Materials and Technology 144 (2) (2022)
https://doi.org/10.1115/1.4052922

Lignin Extraction and Characterization from Oil Palm Empty Fruit Bunches (Opefb) Using Soda and Dioxane Treatments for Polylactic Acid (Pla) Bio-Composites

Mohamad Shahrizad Pairon, Nurul Amirah Abd Rahman, Fathilah Ali, Hazleen Anuar and Jonghwan Suhr
SSRN Electronic Journal (2022)
https://doi.org/10.2139/ssrn.4190857

Materials Requirements in Fused Filament Fabrication: A Framework for the Design of Next‐Generation 3D Printable Thermoplastics and Composites

Antonella Sola
Macromolecular Materials and Engineering 307 (10) (2022)
https://doi.org/10.1002/mame.202200197

3D printing acrylated epoxidized soybean oil reinforced with functionalized cellulose by UV curing

Zengshe Liu, Daniel A. Knetzer, Jifu Wang, Fuxiang Chu, Chuanwei Lu and Paul D. Calvert
Journal of Applied Polymer Science 139 (4) (2022)
https://doi.org/10.1002/app.51561

Increased strength in carbon-poly(ether ether ketone) composites from material extrusion with rapid microwave post processing

Jia-Ruey Ai, Siyuan Li and Bryan D. Vogt
Additive Manufacturing 103209 (2022)
https://doi.org/10.1016/j.addma.2022.103209

Application of Taguchi Method to Optimize the Parameter of Fused Deposition Modeling (FDM) Using Oil Palm Fiber Reinforced Thermoplastic Composites

Mohd Nazri Ahmad, Mohamad Ridzwan Ishak, Mastura Mohammad Taha, et al.
Polymers 14 (11) 2140 (2022)
https://doi.org/10.3390/polym14112140

COVID-19 Biomedical Plastics Wastes—Challenges and Strategies for Curbing the Environmental Disaster

Siddharthan Selvaraj, Somasundaram Prasadh, Shivkanya Fuloria, et al.
Sustainability 14 (11) 6466 (2022)
https://doi.org/10.3390/su14116466

Modelling the Process of Fused Deposition Modelling and the Effect of Temperature on the Mechanical, Roughness, and Porosity Properties of Resulting Composite Products

K. Abouzaid, D. Bassir, S. Guessasma and H. Yue
Mechanics of Composite Materials 56 (6) 805 (2021)
https://doi.org/10.1007/s11029-021-09925-6

3D printing filament as a second life of waste plastics—a review

Katarzyna Mikula, Dawid Skrzypczak, Grzegorz Izydorczyk, et al.
Environmental Science and Pollution Research 28 (10) 12321 (2021)
https://doi.org/10.1007/s11356-020-10657-8

Mechanical and Physicochemical Properties of 3D-Printed Agave Fibers/Poly(lactic) Acid Biocomposites

Valeria Figueroa-Velarde, Tania Diaz-Vidal, Erick Omar Cisneros-López, et al.
Materials 14 (11) 3111 (2021)
https://doi.org/10.3390/ma14113111

Preparation of Chemically Modified Lignin-Reinforced PLA Biocomposites and Their 3D Printing Performance

Seo-Hwa Hong, Jin Hwan Park, Oh Young Kim and Seok-Ho Hwang
Polymers 13 (4) 667 (2021)
https://doi.org/10.3390/polym13040667

Films Based on Thermoplastic Starch Blended with Pine Resin Derivatives for Food Packaging

Cristina Pavon, Miguel Aldas, Juan López-Martínez, Joaquín Hernández-Fernández and Marina Patricia Arrieta
Foods 10 (6) 1171 (2021)
https://doi.org/10.3390/foods10061171

Evaluating machining performance of AlSI 1014 steel using gingelly oil as cutting fluid

Alam Radhika, Shailesh Rao A and Yogesh K B
Australian Journal of Mechanical Engineering 19 (4) 445 (2021)
https://doi.org/10.1080/14484846.2019.1636517

3D Printing of Plant-Derived Compounds and a Proposed Nozzle Design for the More Effective 3D FDM Printing

Vedant Sharma, Hamid Roozbahani, Marjan Alizadeh and Heikki Handroos
IEEE Access 9 57107 (2021)
https://doi.org/10.1109/ACCESS.2021.3071459

Antifouling performance of copper-containing fused filament fabrication (FFF) 3-D printing polymer filaments for marine applications

R. Piola, M. Leary, R. Santander and J. Shimeta
Biofouling 37 (2) 206 (2021)
https://doi.org/10.1080/08927014.2021.1892085

Current State and Challenges of Natural Fibre-Reinforced Polymer Composites as Feeder in FDM-Based 3D Printing

Nishata Royan Rajendran Royan, Jie Sheng Leong, Wai Nam Chan, Jie Ren Tan and Zainon Sharmila Binti Shamsuddin
Polymers 13 (14) 2289 (2021)
https://doi.org/10.3390/polym13142289

Fused Deposition Modeling Based 3D Printing

Vijay Tambrallimath, R. Keshavamurthy, Arun Patil and H. Adarsha
Materials Forming, Machining and Tribology, Fused Deposition Modeling Based 3D Printing 151 (2021)
https://doi.org/10.1007/978-3-030-68024-4_8

Microwave Hydrophobized Lignin with Antioxidant Activity for Fused Filament Fabrication

Jenevieve Yao, Karin Odelius and Minna Hakkarainen
ACS Applied Polymer Materials 3 (7) 3538 (2021)
https://doi.org/10.1021/acsapm.1c00438

Open Source Filament Diameter Sensor for Recycling, Winding, and Additive Manufacturing Machines

Aliaksei Petsiuk and Joshua M. Pearce
Journal of Manufacturing Science and Engineering 143 (10) (2021)
https://doi.org/10.1115/1.4050762

A Review on Filament Materials for Fused Filament Fabrication

Arup Dey, Isnala Nanjin Roan Eagle and Nita Yodo
Journal of Manufacturing and Materials Processing 5 (3) 69 (2021)
https://doi.org/10.3390/jmmp5030069

3D Printing of Okara Ink: The Effect of Particle Size on the Printability

Cheng Pau Lee, Masaki Takahashi, Satoshi Arai, Chi-Lik Ken Lee and Michinao Hashimoto
ACS Food Science & Technology 1 (11) 2053 (2021)
https://doi.org/10.1021/acsfoodscitech.1c00236

Poly(l-lactic acid)/alkali lignin composites: properties, biocompatibility, cytotoxicity and antimicrobial behavior

A. Bužarovska, J. Blazevska-Gilev, B. T. Pérez-Martnez, et al.
Journal of Materials Science 56 (24) 13785 (2021)
https://doi.org/10.1007/s10853-021-06185-6

Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges

Saad Saleh Alghamdi, Sabu John, Namita Roy Choudhury and Naba K. Dutta
Polymers 13 (5) 753 (2021)
https://doi.org/10.3390/polym13050753

Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing

Maria Morales, Cindy Atencio Martinez, Alejandro Maranon, Camilo Hernandez, Veronique Michaud and Alicia Porras
Polymers 13 (7) 1067 (2021)
https://doi.org/10.3390/polym13071067

Sustainable Materials for Fused Deposition Modeling 3D Printing Applications

Jennifer P. Rett, Yannick L. Traore and Emmanuel A. Ho
Advanced Engineering Materials 23 (7) (2021)
https://doi.org/10.1002/adem.202001472

Fused deposition modeling of poly (lactic acid)/almond shell composite filaments

Xiaohui Song, Wei He, Peiqi Chen, Qingsong Wei, Jingxian Wen and Guorui Xiao
Polymer Composites 42 (2) 899 (2021)
https://doi.org/10.1002/pc.25874

Homogeneous distribution of lignin/graphene fillers with enhanced interlayer adhesion for 3D printing filament

Denesh Mohan, Afifah Nabilah Bakir, Mohd Shaiful Sajab, Saiful Bahari Bakarudin, Nurul Nasuha Mansor, Rasidi Roslan and Hatika Kaco
Polymer Composites 42 (5) 2408 (2021)
https://doi.org/10.1002/pc.25987

On the Tensile Behaviour of Bio-Sourced 3D-Printed Structures from a Microstructural Perspective

Sofiane Guessasma, Sofiane Belhabib and Abdullah Altin
Polymers 12 (5) 1060 (2020)
https://doi.org/10.3390/polym12051060

Fused Deposition Modeling of Poly (lactic acid)/Macadamia Composites—Thermal, Mechanical Properties and Scaffolds

Xiaohui Song, Wei He, Huadong Qin, Shoufeng Yang and Shifeng Wen
Materials 13 (2) 258 (2020)
https://doi.org/10.3390/ma13020258

Direct Ink Writing of Fully Bio-Based Liquid Crystalline Lignin/Hydroxypropyl Cellulose Aqueous Inks: Optimization of Formulations and Printing Parameters

Lisa-Sophie Ebers and Marie-Pierre Laborie
ACS Applied Bio Materials 3 (10) 6897 (2020)
https://doi.org/10.1021/acsabm.0c00800

Material Extrusion Additive Manufacturing of Wood and Lignocellulosic Filled Composites

Meghan E. Lamm, Lu Wang, Vidya Kishore, et al.
Polymers 12 (9) 2115 (2020)
https://doi.org/10.3390/polym12092115

Implementing FDM 3D Printing Strategies Using Natural Fibers to Produce Biomass Composite

Waleed Ahmed, Fady Alnajjar, Essam Zaneldin, et al.
Materials 13 (18) 4065 (2020)
https://doi.org/10.3390/ma13184065

Lignin‐Based Micro‐ and Nanomaterials and their Composites in Biomedical Applications

Rui Liu, Lin Dai, Chunlin Xu, Kai Wang, Chunyang Zheng and Chuanling Si
ChemSusChem 13 (17) 4266 (2020)
https://doi.org/10.1002/cssc.202000783

Fused Deposition Modeling of Poly (lactic acid)/Nutshells Composite Filaments: Effect of Alkali Treatment

Xiaohui Song, Wei He, Xingguo Han and Huadong Qin
Journal of Polymers and the Environment 28 (12) 3139 (2020)
https://doi.org/10.1007/s10924-020-01839-z

Effects of the infill pattern on mechanical properties of fused layer modeling (FLM) 3D printed wood/polylactic acid (PLA) composites

S. Kain, J. V. Ecker, A. Haider, M. Musso and A. Petutschnigg
European Journal of Wood and Wood Products 78 (1) 65 (2020)
https://doi.org/10.1007/s00107-019-01473-0

3D-Printed Lab-on-a-Chip Diagnostic Systems-Developing a Safe-by-Design Manufacturing Approach

Panagiotis Karayannis, Fotini Petrakli, Anastasia Gkika and Elias P. Koumoulos
Micromachines 10 (12) 825 (2019)
https://doi.org/10.3390/mi10120825

Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites

Tuan Noraihan Azila Tuan Rahim, Abdul Manaf Abdullah and Hazizan Md Akil
Polymer Reviews 59 (4) 589 (2019)
https://doi.org/10.1080/15583724.2019.1597883

Fused Deposition Modeling of Poly (Lactic Acid)/Walnut Shell Biocomposite Filaments—Surface Treatment and Properties

Xiaohui Song, Wei He, Shoufeng Yang, Guoren Huang and Tonghan Yang
Applied Sciences 9 (22) 4892 (2019)
https://doi.org/10.3390/app9224892

Magnesium Filled Polylactic Acid (PLA) Material for Filament Based 3D Printing

Iulian Antoniac, Diana Popescu, Aurelian Zapciu, et al.
Materials 12 (5) 719 (2019)
https://doi.org/10.3390/ma12050719