Optimization of preheating temperature for TiB2 reinforcement on the preparation of stir cast LM4 + TiB2 composites and effect of artificial aging on hardness improvement using ANOVA

Open Access

Table 2

Statistical test ANOVA used by various authors to identify the best contributing factor for property improvement.

S. No	Material used for the study	Type of study	Statistical test used	Factors tested	Number of levels	Best contributing factor	References
1	A319	Wear studies	ANOVA	Rotating speed, transverse feed, tool pin diameter	3	Tool pin diameter	[24]
2	LM4 + WC	Wear studies	ANOVA	Load, sliding speed, wt.%	4	Load (72.56%)	[23]
3	AlSi5Cu3 + B₄C	Wear studies	ANOVA	Load, speed, distance from outer periphery	3	Load (25.5%)	[22]
4	Al-5.7Si	Wear studies	ANOVA	Process, load, sliding distance, temperature	3	Process (92.24%)	[25]
5	LM4 + TiB₂	Friction behaviour	ANOVA	Load, wt.%, speed	3	wt.% (74.72%)	[26]
6	LM4 + TiB₂	Wear behaviour	ANOVA	Load, wt.%, speed	3	Load (56.31%)	[4]
7	LM4 + Ta/NbC	Wear behaviour	ANOVA	Load, sliding speed, wt.%	4	Load (65.74%)	[27]
8	Al-Si + SiC_p	Wear behaviour	ANOVA	Load, sliding distance, reciprocating velocity, counter surface temperature, wt.%	2	Sliding distance (43.65%) for weight loss; load (43.82%) for COF(μ)	[28]
9	Al 6061 + TiB₂	Mechanical and wear behaviour	ANOVA	Load, wt.%, sliding distance	3	–	[19]
10	Al6063 + SiC + ash	Tribological	ANOVA	Load, wt.%, speed	4	Speed with (60.16%, 40.74%) for volume loss and wear index	[29]
11	A356 + SiC_p	Operating parameters	ANOVA	Axial depth of cut, cutting speed, feed	3	Feed (43.6%)	[30]
12	Al6061 + rock dust	Turning operation	ANOVA	Particle size, wt.%, speed, feed, depth of cut	3	Feed (88.92%)	[31]
13	CuNiSi + Si₃N₄	Wear behaviour	ANOVA	Load, sliding velocity, sliding distance	3	Load (50.15%)	[32]
14	Al7075 + SiC + Al₂O₃	Wear behaviour	ANOVA	Load, sliding speed, hybrid composite combination	3	Load (53.86%)	[33]
15	LM25 + TiC	Mechanical and adhesive wear	ANOVA	Load, sliding velocity, sliding distance	3	Load (54.2%)	[20]
16	Medium carbon steel	Mechanical properties	ANOVA	Quenchant, temperature, soaking time	3	Soaking time (31.95% for hardness, 62.46% for YS, 66.76% for UTS)	[34]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.