EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Volume 9 (2022) Manufacturing Rev., 9 (2022) 8 References
Open Access
Issue
Manufacturing Rev.
Volume 9, 2022
Article Number 8
Number of page(s) 12
DOI https://doi.org/10.1051/mfreview/2022006
Published online 08 March 2022
  1. M.A. Abdelgnei, M.Z. Omar, M.J. Ghazali, M.N. Mohammed, B. Rashid, Dry sliding wear behaviour of thixoformed Al-5.7Si-2Cu-0.3 Mg alloys at high temperatures using taguchi method, Wear 442–443 (2019) 203134 [Google Scholar]
  2. P.N.S. Kumar, T.S. Sachit, N. Mohan, M. Akshayprasad, Dry sliding wear behaviour of Al − 5Si-3Cu-0.5Mn alloy and its WC reinforced composites at elevated temperatures, Mater. Today Proc. 44 (2021) 566–572 [CrossRef] [Google Scholar]
  3. A. Gavel, S. Poria, P. Sahoo, Design of experiments analysis of abrasive friction behavior of Al-TiB2 composites, Mater. Today Proc. 19 (2019) 218–222 [CrossRef] [Google Scholar]
  4. S. Poria, P. Sahoo, G. Sutradhar, Design of experiments analysis of wear behavior of stir cast Al-TiB2 composite in lubricated condition, Mater. Today Proc. 5 (2018) 5221–5228 [CrossRef] [Google Scholar]
  5. M. Ramesh, D. Jafrey Daniel, M. Ravichandran, Investigation on mechanical properties and wear behaviour of titanium diboride reinforced composites, FME Trans. 47 (2019) 873–879 [CrossRef] [MathSciNet] [Google Scholar]
  6. D. Dey, A. Bhowmik, A. Biswas, Characterization of physical and mechanical properties of aluminium based composites reinforced with titanium diboride particulates, J. Compos. Mater. 55 (2021) 1979–1991 [CrossRef] [Google Scholar]
  7. Y. Pazhouhanfar, B. Eghbali, Microstructural characterization and mechanical properties of TiB2 reinforced Al6061 matrix composites produced using stir casting process, Mater. Sci. Eng. A 710 (2018) 172–180 [CrossRef] [Google Scholar]
  8. J. Hashim, L. Looney, M.S.J. Hashmi, The wettability of SiC particles by molten aluminium alloy, J. Mater. Process. Technol. 119 (2001) 324–328 [CrossRef] [Google Scholar]
  9. H. Hanizam, M.S. Salleh, M.Z. Omar, A.B. Sulong, Optimisation of mechanical stir casting parameters for fabrication of carbon nanotubes-aluminium alloy composite through taguchi method, J. Mater. Res. Technol. 8 (2019) 2223–2231 [CrossRef] [Google Scholar]
  10. A. Bhowmik, D. Dey, A. Biswas, Tribological behaviour of aluminium-titanium diboride (Al7075-TiB2) metal matrix composites prepared by stir casting process, Mater. Today Proc. 26 (2020) 2000–2004 [CrossRef] [Google Scholar]
  11. Y. Afkham, S.M. Fattahalhoseini, R.A. Khosroshahi, C. Avani, N. Mehrooz, R.T. Mousavian, Incorporation of silicon carbide and alumina particles into the melt of A356 via electroless metallic coating followed by stir casting, Silicon 10 (2018) 2353–2359 [CrossRef] [Google Scholar]
  12. S. Pourhosseini, H. Beygi, S.A. Sajjadi, Effect of metal coating of reinforcements on the microstructure and mechanical properties of Al-Al2O3 nanocomposites, Mater. Sci. Technol. (United Kingdom) 34 (2018) 145–152 [CrossRef] [Google Scholar]
  13. S. Sen Wu, D. Yuan, S. lin Lü, K. Hu, P. An, Nano-SiCP particles distribution and mechanical properties of Al-matrix composites prepared by stir casting and ultrasonic treatment, China Foundry 15 (2018) 203–209 [CrossRef] [Google Scholar]
  14. S. Kandemir, H.V. Atkinson, D.P. Weston, S.V. Hainsworth, Thixoforming of A356/SiC and A356/TiB2 nanocomposites fabricated by a combination of green compact nanoparticle incorporation and ultrasonic treatment of the melted compact, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 45 (2014) 5782–5798 [CrossRef] [Google Scholar]
  15. D.K. Sharma, D. Mahant, G. Upadhyay, Manufacturing of metal matrix composites: a state of review, Mater. Today Proc. 26 (2020) 506–519 [CrossRef] [Google Scholar]
  16. N. Beigi khosroshahi, R. Taherzadeh mousavian, R. Azari khosroshahi, D. Brabazon, Mechanical properties of rolled A356 based composites reinforced by Cu-coated bimodal ceramic particles, Mater. Des. 83 (2015) 678–688 [CrossRef] [Google Scholar]
  17. K.P. Rohith, E. Sajay Rajan, H. Harilal, K. Jose, K.V. Shankar, Study and comparison of A356-WC composite and A356 alloy for an off-road vehicle chassis, Mater. Today Proc. 5 (2018) 25649–25656 [CrossRef] [Google Scholar]
  18. K.K. Ekka, S. Chauhan, Varun, Study on the sliding wear behaviour of hybrid aluminium matrix composites using taguchi design and neural network, Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl. 230 (2016) 537–549 [Google Scholar]
  19. S. Suresh, N. Shenbaga Vinayaga Moorthi, S.C. Vettivel, N. Selvakumar, Mechanical behavior and wear prediction of stir cast Al-TiB2 composites using response surface methodology, Mater. Des. 59 (2014) 383–396 [CrossRef] [Google Scholar]
  20. C. Magaacibhi Athev, J. Nithin Alistar, N. Radhika, Synthesis of Al LM25/TiC composite using squeeze casting method and investigation of its mechanical and adhesive wear properties, Mater. Today Proc. 5 (2018) 12681–12692 [CrossRef] [Google Scholar]
  21. M. Muthu Krishnan, J. Maniraj, R. Deepak, K. Anganan, Prediction of optimum welding parameters for FSW of aluminium alloys AA6063 and A319 using RSM and ANN, Mater. Today Proc. 5 (2018) 716–723 [CrossRef] [Google Scholar]
  22. N. Radhika, R. Raghu, Three body abrasion wear behaviour of functionally graded aluminium/B4C metal matrix composite using design of experiments, Proc. Eng. 97 (2014) 713–722 [CrossRef] [Google Scholar]
  23. T.S. Sachit, N. Mohan, Wear rate optimization of tungsten carbide (WC) nano particles reinforced aluminum LM4 alloy composites using Taguchi techniques, Mater. Res. Express 6 (2019) 066564 [CrossRef] [Google Scholar]
  24. M. Marichamy, S. Babu, Experimental study and taguchi optimization of process parameter on mechanical properties of A319 aluminum alloy using friction stir welding, Mater. Today Proc. 39 (2021) 1527–1531 [CrossRef] [Google Scholar]
  25. M.A. Abdelgnei, M.Z. Omar, M.J. Ghazali, M.N. Mohammed, B. Rashid, Dry sliding wear behaviour of thixoformed Al-5.7Si-2Cu-0.3 Mg alloys at high temperatures using taguchi method, Wear 442–443 (2020) 203134 [CrossRef] [Google Scholar]
  26. S. Poria, G. Sutradhar, P. Sahoo, Design of experiments analysis of friction behavior of Al-TiB2 composite, Mater. Today Proc. 4 (2017) 2956–2964 [CrossRef] [Google Scholar]
  27. T.S. Sachit, N. Mohan, R. Suresh, M.A. Prasad, Optimization of dry sliding wear behavior of aluminum LM4-Ta/NbC nano composite using Taguchi technique, Mater. Today Proc. 27 (2019) 1977–1983 [Google Scholar]
  28. V.R. Rajeev, D.K. Dwivedi, S.C. Jain, Dry reciprocating wear of Al-Si-SiCp composites: a statistical analysis, Tribol. Int. 43 (2010) 1532–1541 [CrossRef] [Google Scholar]
  29. P.P. Ikubanni, M. Oki, A.A. Adeleke, O.O. Agboola, Optimization of the tribological properties of hybrid reinforced aluminium matrix composites using Taguchi and Grey's relational analysis, Sci. African 12 (2021) [Google Scholar]
  30. K. Jayakumar, Study of cutting force and surface roughness in ball nose end milling of vacuum hot pressed A356 alloy/SiCp metal matrix composite, Mater. Today Proc. 5 (2018) 6526–6533 [CrossRef] [Google Scholar]
  31. K. Soorya Prakash, P.M. Gopal, S. Karthik, Multi-objective optimization using taguchi based grey relational analysis in turning of rock dust reinforced aluminum MMC, Meas. J. Int. Meas. Confed. 157 (2020) 107664 [CrossRef] [Google Scholar]
  32. V. Jayan, Nithinraj, N. Radhika, Taguchi's technique in optimization of process parameters on wear behaviour of Cu/Si3N4 metal matrix composite, Mater. Today Proc. 24 (2020) 1052–1063. [CrossRef] [Google Scholar]
  33. K.K. Ekka, S.R.S. Chauhan, Varun, Study on the sliding wear behaviour of hybrid aluminium matrix composites using Taguchi design and neural network, Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl. 230 (2016) 537–549 [Google Scholar]
  34. O.O. Agboola et al., Optimization of heat treatment parameters of medium carbon steel quenched in different media using Taguchi method and grey relational analysis, Heliyon 6 (2020) [Google Scholar]
  35. S. Poria, P. Sahoo, G. Sutradhar, Tribological characterization of stir-cast aluminium-TiB2 metal matrix composites, Silicon 8 (2016) 591–599 [CrossRef] [Google Scholar]
  36. M.C. Gowrishankar, P. Hiremath, M. Shettar, S. Sharma, U. Satish rao, Experimental validity on the casting characteristics of stir cast aluminium composites, J. Mater. Res. Technol. (2020) [Google Scholar]
  37. M. Shettar, P. Hiremath, G. Shankar, A. Kini, S. Sharma, Tribolayer behaviour and wear of artificially aged Al6061 hybrid composites, Int. J. Automot. Mech. Eng. 18 (2021) 8668–8676 [CrossRef] [Google Scholar]
  38. P.K. Jayashree, M.C. Gowrishankar, S. Sharma, R. Shetty, M. Shettar, P. Hiremath, Influence of homogenization and aging on tensile strength and fracture behavior of TIG welded Al6061-SiC composites, J. Mater. Res. Technol. 9 (2020) 3598–3613 [CrossRef] [Google Scholar]
  39. D.K.B. Donald, R. Askeland, Pradeep P. Fulay, Essentials of materials science and engineering: SI edition (2010) [Google Scholar]
  40. H.M. Medrano-Prieto, C.G. Garay-Reyes, C.D. Gómez-Esparza, J. Aguilar-Santillán, M.C. Maldonado-Orozco, R. Martínez-Sánchez, Evolution of microstructure in Al-Si-Cu system modified with a transition element addition and its effect on hardness, Mater. Res. 19 (2016) 59–66 [CrossRef] [Google Scholar]
  41. J.Y. Hwang, R. Banerjee, H.W. Doty, M.J. Kaufman, The effect of Mg on the structure and properties of Type 319 aluminum casting alloys, Acta Mater. 57 (2009) 1308–1317 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.