EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Volume 9 (2022) Manufacturing Rev., 9 (2022) 5 References
Open Access
Issue
Manufacturing Rev.
Volume 9, 2022
Article Number 5
Number of page(s) 12
DOI https://doi.org/10.1051/mfreview/2022005
Published online 07 February 2022
  1. F. Nturanabo, L. Masu, J.B. Kirabira, Novel application of Aluminium matrix metal composite. Aluminium Alloys and Composites, Kavian Omar Cooke, IntechOpen (2019), pp. 1–24, DOI:10.5772/intechopen.86225 [Google Scholar]
  2. D.K. Koli, G. Agnihotri, R. Purohit, Advanced aluminium matrix composites: the critical need of automotive and aerospace engineering fields, Mater. Today: Proc. A 2 (2015) 3032–3041 [CrossRef] [Google Scholar]
  3. S. Kulkarni, D.J. Edwards, E.A. Parn, C. Chapman, Evaluation of vehicle lightweighting to reduce greenhouse gas emissions with focus on magnesium substitution, J. Eng. Des. Tech. A 3 (2018) 42 [Google Scholar]
  4. W. Wellbrock, D. Ludin, L. Röhrle, W. Gerstlberger, Sustainability in the automotive industry, importance of and impact on automobile interior − insights from an empirical survey, Inter. J. Cor. Soc. Resp. A5 (2020), Article number: 10 [Google Scholar]
  5. S. Tang, S. Shao, H. Liu, F. Jiang, D. Fu, H. Zhang, J. Teng, Microstructure and mechanical behaviors of 6061 Al matrix hybrid composites reinforced with SiC and stainless steel particles, Mater. Sci. Eng. A 804 (2021) 140732 [CrossRef] [Google Scholar]
  6. M. Khan, R.U. Din, M.A. Basit, A. Wadood, S.W. Husain, S. Akhtar, R.E. Aune, Study of microstructure and mechanical behaviour of aluminium alloy hybrid composite with boron carbide and graphene nanoplatelets, Mater. Chem. Phys. A 271 (2021) 12493 [Google Scholar]
  7. A.A. Adediran, K.K. Alaneme, I.O. Oladele, E.T. Akinlabi, A. Adesoji, J. Sanchez, Microstructural characteristics and mechanical behaviour of aluminium matrix composites reinforced with Si-based refractory compounds derived from rice husk, Cogent. Eng. A 8 (2021) 1897928 [CrossRef] [Google Scholar]
  8. M.O. Bodunrin, K.K. Alaneme, L.H. Chow, Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical corrosion and tribological characteristics, J. Mater. Res. Technol. 4 (2015) 434–445 [CrossRef] [Google Scholar]
  9. M.P. Reddy, V. Manakari, G. Parande, R. A. Shakoor, A.M.A. Mohamed, M. Gupta, Structural, mechanical and thermal characteristics of Al-Cu-Li particle reinforced Al-matrix composites synthesized by microwave sintering and hot extrusion, Compos. B 164 (2019) 485–492 [CrossRef] [Google Scholar]
  10. X. Li, Y. Fan, X. Zhao, R. Ma, A. Du, X. Cao, H. Ban, Damping capacity and storage modulus of SiC matrix composite infiltrated by AlSi Alloy, J. Metals. A9 (2019) 1195 [CrossRef] [Google Scholar]
  11. K.K. Alaneme, E. Okotete, A.V. Fajemsimi, M. Bodunrin, Applicability of metallic reinforcements for mechanical performance enhancement in metal matrix composites, Rev. Arab J. Basic Appl. Sci. A 26 (2019) 331–330 [Google Scholar]
  12. K.K. Alaneme, M.O. Bodunrin, L.H. Chown, N.B. Maledi, Flow stress behaviour and microstructural analysis of hot deformed Aluminium matrix composites reinforced with CuZnAlNi shape memory alloy particles, Rev. Metal 56 (2020) e170 [CrossRef] [Google Scholar]
  13. Z. Wang, M.S. Xie, W.W. Zhang, C. Yang, G. Xie, D.V. Louzguine-Luzgin, Achieving super-high strength in an aluminum based composite by reinforcing metallic glassy flakes, Mater. Letl. A 262 (2020) Article 127059 [CrossRef] [Google Scholar]
  14. P.R. Matli, V. Manakari, G. Parande, M.R. Mattli, R.A. Shakoor, M. Gupta, Improving mechanical, thermal, and damping properties of NiTi (Nitinol) reinforced aluminium nanocomposites, J. Comp. Sci. A 4 (2020) 1–12 [Google Scholar]
  15. L. Tiwen, C. Weiping, L. Bing, M. Mengdi, L. Zixuan, L. Yixiong, S. Sergio, Influence mechanisms of Zr and Fe particle additions on the microstructure and mechanical behavior of squeeze-cast 7075Al hybrid composites, J. Alloys Compd. 798 (2019) 587–596 [CrossRef] [Google Scholar]
  16. K.K. Alaneme, M.O. Bodunrin, A.A. Awe, Microstructure, mechanical and fracture properties of groundnut shell ash − silicon carbide hybrid reinforced with aluminium-based composites, King Saud Uni. J.: Eng. Sci. 30 (2018) 96–103 [Google Scholar]
  17. D. Siva Prasad, C. Shoba, Damping behavior of metal matrix composites, Trans. Indian Inst. Met. 68 (2015) 161–167 [CrossRef] [Google Scholar]
  18. R.C. Crăciun, S. Stanciu, R. Cimpoeșu, A.I.D, Ursanu, V. Manole, P. Paraschiv, D.L. Chicet, Metallic materials for mechanical damping capacity applications, IOP Conf. Series: Mater. Sci. Eng. 147 (2016) 012031 [CrossRef] [Google Scholar]
  19. D. Siva Prasad, C. Shoba, K.R. Varma, Damping behavior of commonly used reinforcement powders − an experimental approach, Eng. Sci. Tech., Int. J. 18 (2015) 674–679 [Google Scholar]
  20. Y.T. Zhou, Y. Zan, S. Zheng, Q.Z. Wang, B.L. Xiao, X. Ma, Z.Y. Ma, Distribution of the microalloying element Cu in B4C-reinforced 6061Al composites, J. Alloys Compds. A 728 (2017) 112–117 [CrossRef] [Google Scholar]
  21. A. Sharma, B. Ahn, Recycling of aluminum alloy from Al-Cu metal matrix composite reinforced with SiC particulates, Korean J. Mater. Res. 28 (2018) 691–695 [CrossRef] [Google Scholar]
  22. M. Gopi Krishna, K. Praveen Kumar, M. Naga Swapna, J. Babu Rao, N.R.M.R. Bhargava, Fabrication characterization and mechanical behaviour of A356/copper particulate reinforced metallic composites, Mater. Today Proc. 5 (2018) 7685–7691 [CrossRef] [Google Scholar]
  23. A. Achaya, N. Bag, Development and evaluation of various properties of copper aluminium metal matrix composites, Inter. Res. J. Eng. Tech. A04 (2017) 1–3 [Google Scholar]
  24. S. Madhusudan, M.M.M. Sarcar, N.B.R.M. Rao, Mechanical properties of Aluminum-Copper composite metallic materials, J. Appl. Res. Technol. 14 (2016) 1–7 [Google Scholar]
  25. K.K. Alaneme, A.V. Fajemisin, N.B. Maledi, Development of aluminium based composites reinforced with steel and graphite particles: structural, mechanical, and wear characterization, J. Mater. Res. Technol. 8 (2018) 670–682 [Google Scholar]
  26. K. Alaneme, A.O. Aluko, Production and age-hardening behaviour of borax premixed SiC reinforced Al-Mg-Si alloy composites developed by double stir casting technique, West Indian J. 34 (2012) 80–85 [Google Scholar]
  27. J. Kumar, D. Singh, N.S. Kalsi, S. Sharma, M. Mia, J. Singh, M. Azizur Rahman, A.M. Khan, K.V. Rao, Investigation on the mechanical, tribological, morphological and machinability behaviour of stir-casted Al/SiC/Mo reinforced MMCs, J. Mater. Res. Technol. A12 (2021) 930–946. [CrossRef] [Google Scholar]
  28. ASTM E92 Standard (2017): Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials [Google Scholar]
  29. ASTM E8/E8M Standard (2021): Standard Test Methods for Tension Testing of Metallic Materials [Google Scholar]
  30. K.K. Alaneme, 2011: Fracture toughness (K1C) evaluation for dual phase low alloy steel using circumferential notched tensile (CNT) specimens, Mater. Res. 14 (2010) 155–160 [CrossRef] [Google Scholar]
  31. S.K. Nath, U.K. Das, Effect of microstructure and notches on the fracture toughness of medium carbon steel, J Naval Arch Mar. 3 (2006) 15–22 [Google Scholar]
  32. ASTM E756-05 Standard (2017): Standard Test Method for Measuring Vibration-Damping Properties of Materials [Google Scholar]
  33. K.K. Alaneme, M.O. Bodunrin, E.A. Okotete, On the nanomechanical properties and local strain rate sensitivity of selected Aluminium based composites reinforced with metallic and ceramic particles, J. King Saud Univ. Eng. Sci. (2021) https://doi.org/10.1016/j.jksues.2021.02.011 [Google Scholar]
  34. R. Karwa, 2020: Heat and Mass Transfer (Springer, Singapore, 2020), pp. XXV, 1147 [Google Scholar]
  35. I. Kim, M. Song, J. Kim, Effects of Ti-B and Si additions on microstructure and mechanical properties of Al-Cu-Mg based aluminum matrix composites, J. Alloys Compd. A832 (2020) 154827 [CrossRef] [Google Scholar]
  36. T. Prasad, A.C. Reddy, Strengthening mechanisms in Al-alloy/carbon black nanocomposites, Int. J. Mater. Sci. A 15 (2020) 19–36 [Google Scholar]
  37. S.R. Prabhu, A.K. Shettigar, M.A. Herbert, S.S. Rao, Microstructure and mechanical properties of rutile-reinforced AA6061 matrix composites produced via stir casting process, Trans. Nonferrous Met. Soc. China A 29 (2019) 2229–2236 [CrossRef] [Google Scholar]
  38. V. Pamula, K.P. Kalyan, R.V. Vignesh, M. Govindaraju, Development and characterization of aluminum matrix composite reinforced with continuous stainless-steel fibers, Mater. Today: Proc. 45 (2021) 7816–7821 [CrossRef] [Google Scholar]
  39. K.K. Alaneme, I.B. Akintunde, P.A. Olubambi, T.M. Adewale, Fabrication characteristics and mechanical behaviour of rice husk ash − alumina reinforced Al-Mg-Si alloy matrix hybrid composites, J. Mater. Res. Technol. 2 (2013) 60–67 [CrossRef] [Google Scholar]
  40. R. Guluzade, A. Avcı, M.T. Demirci, O.F. Erkendirci, Fracture toughness of recycled AISI 1040 steel chip reinforced AlMg1SiCu aluminum chip composites, Mater. Des. 52 (2013) 345–35 [CrossRef] [Google Scholar]
  41. D.S. Prasad, C. Shoba, Experimental evaluation onto the damping behavior of Al/SiC/RHA hybrid composites, J. Mater. Res. Technol. 5 (2016) 123–130 [CrossRef] [MathSciNet] [Google Scholar]
  42. P.K. Rohatgi, D. Nath, S.S. Singh, B.N. Keshavaram, Factors affecting the damping capacity of cast aluminium-matrix composites, J. Mater. Sci. 29 (1994) 5975–5984 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.