Open Access
Manufacturing Rev.
Volume 9, 2022
Article Number 20
Number of page(s) 10
Published online 02 August 2022
  1. E. Kaya, B. Akiiz, Effects of cutting parameters on machinability characteristics of Ni-based superalloys: a review, Open Eng. 7 (2017) 330–342 [CrossRef] [Google Scholar]
  2. F.S. BenSal, A. Haddad, M. Athmane Yallese, Optimization of machining parameters in turning of Inconel 718 Nickel-base super alloy, Mech. Ind. 21 (2020) 203 [CrossRef] [EDP Sciences] [Google Scholar]
  3. S. Senthil Kuma, M. Ponnusamy Sudeshkumar, C. Ezilarasan, S. Palani, J. Veerasundaram, Modelling and simulation of machining attributes in dry turning of aircraft materials Nimonic C263 using CBN, Manufactur. Rev. 8 (2021) 30 [CrossRef] [EDP Sciences] [Google Scholar]
  4. L.B. Abhang, M. Iqbal, M. Hameedullah, Optimization of machining process parameters using Moora method, Defect Diffus. Forum 402 (2020) 81–89 [CrossRef] [Google Scholar]
  5. A. Sarkara, S.C. Panja, D. Das, B. Sarkar, Developing an efficient decision support system for non-traditional machine selection: an application of MOORA and MOOSRA, Product. Manufactur. Res. 3 (2015) 324–342 [CrossRef] [Google Scholar]
  6. V.S. Gadakh, V.B. Shinde, N.S. Khemnar, Optimization of welding process parameters using MOORA method, Int. J. Adv. Manuf. Technol. 69 (2013) 2031–2039 [CrossRef] [Google Scholar]
  7. Z.-L. Liang, T.-J. Yun, W.-B. Oh, B.-R. Lee, I.-S. Kim, A study on MOORA-based taguchi method for optimization in automated GMA welding process, Mater. Today 22 (2020) 1778–1785 [Google Scholar]
  8. V. Anandan, M. Naresh Babu, M. Vetrivel Sezhian, C. Vakkas Yildirim, M. Dinesh Babu, Influence of graphene nano fluid on various environmental factors during turning of M42 steel, J. Manufactur. Process. 68 (2021) 90–103 [CrossRef] [Google Scholar]
  9. S.V. Wankhede, J.A. Hole, MOORA and TOPSIS based selection of input parameter in solar powered absorption refrigeration system, Int. J. Ambient Energy (2020). DOI: 01430750.2020.1831600 [Google Scholar]
  10. G.R. Chate, M. Patel, G.C. Harsha, H.M. Shubham, U. Urankar, S.A. Sanadi, A.P. Jadhav, S. Hiremath, A.S. Deshpande, Sustainable machining: modeling and optimization using Taguchi, MOORA and DEAR methods, Mater. Today Proc. (2021) [Google Scholar]
  11. V. Jain, P. Ajmera, Application of MADM methods as MOORA and WEDBA for ranking of FMS flexibility, Int. J. Data Netw. Sci. 3 (2019) 119–136 [CrossRef] [Google Scholar]
  12. P. Chaudhury, S. Samantaray, Multi-optimization of process parameters for machining of a non-conductive SiC ceramic composite by non-conventional machining method, Manufactur. Rev. 7 (2020) 32 [CrossRef] [EDP Sciences] [Google Scholar]
  13. A. Hamdy, M. Fattouh, S. Abaas, R. Masoud, Multi-objective optimization of plasma arc cutting process using Moora combined with GA, Eng. Res. J. 42 (2019) 219–230 [Google Scholar]
  14. D. Jhodkar, A. Khan, K. Gupta, Fuzzy-MOORA based optimization of machining parameters for machinability enhancement of Titanium, Math. Model. Eng. Probl. 8 (2021) 189–198 [CrossRef] [Google Scholar]
  15. P.J. Arrazola, A. Garay, E. Fernandez, K. Ostolaza, Correlation between tool flank wear, force signals and surface integrity when turning bars of Inconel 718 in finishing conditions, Int. J. Mach. Mach. Mater. 15 (2014) 84–100 [Google Scholar]
  16. M. Safavi Marek Balazinski, H. Mehmanparast, S. Ali Niknam, Experimental characterization of tool wear morphology and cutting force profile in dry and wet turning of titanium metal matrix composites (Ti-MMCs), Metals 10 (2020) 1459 [CrossRef] [Google Scholar]
  17. S. Sun, M. Brandt, J.P.T. Mo, Evolution of tool wear and its effect on cutting forces during dry machining of Ti-6Al-4V alloy, Proc. IMechE B 228 (2014) 191–202 [CrossRef] [Google Scholar]
  18. E.K. Zavadskas, A. Kaklauskas, V. Sarka, The new method of multicriteria complex proportional assessment of projects, Technol. Econ. Dev. Econ. 1 (1994) 131–139 [Google Scholar]
  19. M. Varathrajulu, M. Duraiselvam, M. Bhuvanesh Kumar, G. Jayaprakash, N. Baskar, Multi criteria decision making through TOPSIS and COPRAS on drilling parameters of magnesium AZ91, J. Magn. Alloys 4 (2021) 1–18 [Google Scholar]
  20. D.D. Trung, A combination method for multi-criteria decision making problem in turning process, Manufactur. Rev. 8 (2021) 1–26 [CrossRef] [EDP Sciences] [Google Scholar]
  21. S.H. Mousavi-Nasab, A. Sotoudeh-Anvari, Comprehensive MCDM-based approach using TOPSIS, COPRAS and DEA as an auxiliary tool for material selection problems, Mater. Des. 121 (2017) 237–253 [CrossRef] [Google Scholar]
  22. D.D. Trung, N.-T. Nguyen, D. Van Duc, Study on multi-objective optimization of the turning process of En 10503 steel by combination of Taguchi method and Moora technique, EUREKA: Phys. Eng. 2 (2021) 52–65 [CrossRef] [MathSciNet] [Google Scholar]
  23. S. Thamizhmanii, S. Hasan, Relationship between Flank wear and Cutting Force on the Machining of Hard Martensitic Stainless Steel by Super Hard Tools, in Proceedings of the World Congress on Engineering 2010 Vol III, WCE 2010, June 30-July 2 (2010) London, UK [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.