Open Access
Issue |
Manufacturing Rev.
Volume 11, 2024
|
|
---|---|---|
Article Number | 13 | |
Number of page(s) | 12 | |
DOI | https://doi.org/10.1051/mfreview/2024010 | |
Published online | 29 April 2024 |
- S.A.S. Alkadhim, I. Al-Saedi, F. Mahel, CNC machine based on embedded wireless and internet of things for workshop development, IJCDS J. 6 (2017) 205 [CrossRef] [Google Scholar]
- R. Qin, C. Dai, Conceptual design of the cold heading machine servo system based on NX-MCD, J. Phys.: Conf. Ser. 1087 (2018) 42–57 [Google Scholar]
- H.S. Bank, S. D'souza, A. Rasam, Temporal logic (TL)-based autonomy for smart manufacturing systems, Proc. Manufactur. 26 (2018) 1221–1229 [CrossRef] [Google Scholar]
- M. Metzner, S. Weissert, E. Karlidag, F. Albrecht, A. Blank, A. Mayr, J. Franke, Virtual commissioning of 6 DoF pose estimation and robotic bin picking systems for industrial parts, IFAC PapersOnLine 10 (2019) 160–164 [CrossRef] [Google Scholar]
- J. Wang, C. Dai, K. Shi, R. Qin, Research on rigid body motion tracing in space based on NX MCD, IOP Conf. Ser.: Mater. Sci. Eng. 320 (2018) 012012 [Google Scholar]
- I.R.K. Al Saedi et al., CNC machine based on embedded wireless and internet of things for workshop development, Int. J. Comput. Dig. Syst. 4 (2017) 205–212 [CrossRef] [Google Scholar]
- H. Cheng, H. Canjun, Debugging tentang pelatihan praktis pemrograman aplikasi robot industri sertifikat “1+X” berbasis NX MCD, Inovasi dan Aplikasi IPTEK 11 (2021) 45–47 [Google Scholar]
- Z. Tian, W. Xue, K. Deyu, Debugging dan perancangan kontrol penyortiran material berbasis plc, Dunia Digital 7 (2018) 256–257 [Google Scholar]
- C. Grieves, G. Wiener, D. Edgington, Digital twins for systems and assets, Proc. Inst. Mech. Eng. B 216 (2002) 57–64 [Google Scholar]
- H.-J. Thomas, U.C. Lehmann, R. Steinhilper, The digital twin: realizing the cyber-physical production system for industry 4.0, Proc. CIRP 61 (2017) 335–340 [CrossRef] [Google Scholar]
- J.U. Stephan Weyer, F. Quint, Plug-and-simulate within modular assembly line enabled by digital twins and the use of automationML, IFAC PapersOnLine 50 (2017) 15904–15909 [CrossRef] [Google Scholar]
- G.N. Schroeder, C. Steinmetz, C.E. Pereira, D.B. Espindola, Digital twin data modeling with automationML and a communication methodology for data exchange, IFAC PapersOnLine 30 (2016) 12–17 [CrossRef] [Google Scholar]
- N. Tingzhou, Z. Yao, F. Ling. Motion Simulation Analysis of the Horizontal Sealing Device for the Bulk Material Packaging Machine Based on SOLIDWORKS Motion [J]. Journal of Physics: Conference Series, 1885 (2021) 042060. [Google Scholar]
- Y. Yang, X. Cao, D. Liu, A calibration method for mechanical arm DH parameters using a calibration plate, Mech. Trans. 41 (2017) 178–181+192. [Google Scholar]
- C. Wenzhan, T. Jianyan, W. Shuyu, Penelitian tentang komisioning virtual gabungan robot gerinda berdasarkan NX MCD dan TIA, Mod. Manufactur. Eng. 502 (2022) 37–42+120 [Google Scholar]
- X. Xueping, D. Chunxiang, S. Guirong, Penelitian dan penerapan sistem desain konseptual mekatronik NX mekatronik, Teknologi Pengukuran dan Pengujian 43 (2016) 12 [Google Scholar]
- L. Yucheng, H. Yong, Komisioning virtual peralatan mesin CNC berdasarkan NX MCD, Teknologi Manufaktur dan Peralatan Mesin (2021) [Google Scholar]
- W. Cai et al., Joint virtual debugging research of robot polishing based on NX MCD and TIA, Mod. Manufactur. Eng. 07 (2022) 37–42+120. [Google Scholar]
- Z. Hui, Y. Chao, S. Hongyang, Komisioning virtual mesin cetak injeksi sepenuhnya otomatis berdasarkan NXMCD, Teknologi Teknik Mesin dan Elektro 51 (2022) 01 [Google Scholar]
- G. Lianjin, W. Guanjie, C. Huanjie, Desain peralatan perakitan dan penyortiran material berdasarkan NX MCD, Mesin 49 (2022) 68–75 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.