EDP Sciences logo
Submit your paper
Sciengine logo
Search
Menu
Home All issues Volume 13 (2026) Manufacturing Rev., 13 (2026) 1 References
Open Access
Issue
Manufacturing Rev.
Volume 13, 2026
Article Number 1
Number of page(s) 17
DOI https://doi.org/10.1051/mfreview/2025028
Published online 30 January 2026
  1. T. Majeed, M.A. Wahid, M.N. Alam et al., Friction stir welding: a sustainable manufacturing process, Mater. Today: Proc. 46 (2021) 6558–6563 [Google Scholar]
  2. D. Zuo, Z. Cao, Y. Cao et al., Thermal fields in dissimilar 7055 Al and 2197 Al-Li alloy FSW T-joints: numerical simulation and experimental verification, Int. J. Adv. Manuf. Technol. 103 (2019) 3495–3512 [Google Scholar]
  3. M.C. Holman, Autoclave age forming large aluminum aircraft panels, J. Mech. Work Technol. 20 (1989) 477–488 [Google Scholar]
  4. F. Lyu, Y. Li, X. Huang et al., An investigation of creep age forming of AA7B04 stiffened plates: experiment and FE modelling, J. Manuf. Process. 37 (2019) 232–241 [CrossRef] [Google Scholar]
  5. W. Zhou, Z. Shi, Q. Rong et al., Experimental and numerical investigations on buckling behaviour of stiffened panel during creep age forming, Thin Wall Struct. 172 (2022) 108940 [CrossRef] [Google Scholar]
  6. F. Chen, J. Zhong, L. Zhan et al., Effect of pre-aging on creep aging properties and microstructure evolution of 2195 Al-Li alloy, J. Mater. Res. Technol. 21 (2022) 1029–1041 [Google Scholar]
  7. Y. Li, W. Zhai, Z. Cheng et al., The influence of ultrasonic vibration on parts properties during incremental sheet forming, Adv. Manuf. 9 (2021) 250–261 [Google Scholar]
  8. Z.B. Yang, Y.Q. Zhang et al., Residual stresses in ultrasonic-assisted laser sintered grinding diamond materials, Strength Mater. 51 (2019) 593–600 [Google Scholar]
  9. Z. Li, X. Li, Z. Huang et al., Ultrasonic-vibration-enhanced plasticity of an entropic alloy at room temperature, Acta Mater. 225 (2022) 117569 [Google Scholar]
  10. Y. Liu, C. Wang, R. Bi, Acoustic residual softening and microstructure evolution of T2 copper foil in ultrasonic vibration assisted micro-tension, Mater. Sci. Eng. A 841 (2022) 143044 [Google Scholar]
  11. Y. Pi, C. Gao, X. Yin, Effect of axial ultrasonic vibration on the surface topography and microstructure of Al6061 chip in extrusion cutting, Int. J. Mater. 17 (2024) 35–53 [Google Scholar]
  12. G. Han, W. Wan, Z. Zhang et al., Experimental investigation into effects of different ultrasonic vibration modes in micro-extrusion process, J. Manuf. Process. 67 (2021) 427–437 [Google Scholar]
  13. T. Zhou, C. Ma, Study of ultrasonic vibration-assisted forming in copper cylinder compression, Procedia Manuf. 50 (2020) 199–202 [Google Scholar]
  14. Y. Cao, Y. Zhu, W. Ding et al., Vibration coupling effects and machining behavior of ultrasonic vibration plate device for creep-feed grinding of Inconel 718 nickel-based superalloy, Chinese J. Aeronaut. 35 (2022) 332–345 [Google Scholar]
  15. M. Szpunar, R. Ostrowski, T. Trzepieciński et al., Central composite design optimisation in single point incremental forming of truncated cones from commercially pure titanium grade 2 sheet metals, Mater (Basel, Switzerland) 14 (2021) 3634 [Google Scholar]
  16. D.K. Mohanta, B. Sahoob, A.M. Mohanty, Optimization of process parameter in Al 7075 turning using grey relational, desirability function and metaheuristics, Mater. Manuf. Process. 38 (2023) 1615–1625 [Google Scholar]
  17. D. Wang, Y. Xie, Y. Guo et al., Research on process optimization and die surface compensation for high-strength steel forming springback based on Kriging model, Forging & Stamping Technol. 46 (2021) 62–69 [Google Scholar]
  18. D. Zuo, Z. Cao, Y. Cao et al., Effect of pre-stretching on microstructures and mechanical behaviors of creep-aged 7055 Al alloy and its constitutive modeling, Metals 9 (2019) 584 [Google Scholar]
  19. X. Wang, X. Guo, G. Chen et al., Remark of integral panel forming, Modern Manuf. Technol. Equip. (03): 1-4, 7. https://doi.org/10.3969/j.issn.1673-5587.2008.03.001. [Google Scholar]
  20. Z. Lin, Principle and design of ultrasonic amplitude transformer, Science Press, Beijing, 1987 [Google Scholar]
  21. T. Zheng, L. Zhang, J. Liao, Mechanical behavior and constitutive modeling of magnesium alloy sheet in ultrasonic vibration assisted tensile test, J. Plast. Eng. 27 (2020) 170–176 [Google Scholar]
  22. S. Chen, D. Jiang, F. Ma et al., Analysis of bonding strength of metal-plastic adhesion based on central composite design, China J. Highw. Transp. 32 (2019) 175–182 [Google Scholar]
  23. P. Sagar, A. Handa, Prediction of wear resistance model for magnesium metal composite by response surface methodology using central composite design, World J. Eng. 18 (2021) 316–327 [Google Scholar]
  24. Statistics Group, Institute of Mathematics, Chinese Academy of Sciences, Analysis of variance, Science Press, Beijing, 1977 [Google Scholar]
  25. S. Helfrich, S. Ruzika, The weighted p-norm weight set decomposition for multiobjective discrete optimization problems, J. Optim. Theory Appl. 202 (2024) 1187–1216 [Google Scholar]
  26. Q. Zhang, J. Ding, W. Shen et al., Multiobjective particle swarm optimization for microgrids pareto optimization dispatch, Math. Probl. Eng. 2020 (2020) 1–13 [Google Scholar]
  27. W. Huang, W. Guo, P. Guo et al., Optimization design of high frequency magnetostrictive transducer based on the multi-objective genetic algorithm, Chin. J. Sci. Instrum. 43 (2022) 111–119 [Google Scholar]
  28. W. Wang, H. Li, X. Hou et al., Multi-criteria evaluation of distributed energy system based on order relation-anti-entropy weight method, Energies 14 (2021) 246 [Google Scholar]
  29. G. Sun, G. Li, G. Zheng et al., Multi-objective optimization for sheet metal formnig of drawing with successive response surface method, Chin. J. Theor. Appl. Mech. 42 (2010) 245–255 [Google Scholar]
  30. J. Li, W. Zuo, E. Jiaqiang et al., Multi-objective optimization of mini U-channel cold plate with SiO2 nanofluid by RSM and NSGA-II, Energy 242 (2022) 123039 [Google Scholar]
  31. Q. Wan, X. Jia, Multi-objective optimization of CFRP drilling parameters with a hybrid method integrating the ANN, NSGA-II and fuzzy C-means, Compos. Struct. 235 (2020) 111803 [Google Scholar]
  32. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of China. GB/T 2651 —2008, Tensile test method of welded joints, Standards Press of China, Beijing, 2008 [Google Scholar]
  33. D. Jacquin, G. Guillemot, A review of microstructural changes occurring during FSW in aluminium alloys and their modelling, J. Mater. Process. Technol. 288 (2021) 116706 [Google Scholar]
  34. J. Tang, B. Yu, J. Zhang et al., Effects of pre-deformation mode and strain on creep aging bend-forming process of Al-Cu-Li alloy, T Nonferr. Metal. Soc. 30 (2020) 1227–1237 [Google Scholar]
  35. D. Liu, J. Chen, B. Li et al., Effect of ultrasonic vibration-assisted two-stage age forming on properties of 7075 aluminum alloy, Int. J. Adv. Manuf. Technol. 115 (2021) 3485–3492 [Google Scholar]
  36. F. Tioguem, F. N'guyen, M. Maziere et al., Advanced quantification of the carbide spacing and correlation with dimple size in a high-strength medium carbon martensitic steel, Mater. Charact. 167 (2020) 110531 [Google Scholar]
  37. Z. Zhou, Q. Wang et al., Ultra-fine Nbss/Nb5Si3 in situ composites with remarkable properties prepared by ultrasonic melt treatment, J. Alloy Compd. 940 (2023) 168940 [Google Scholar]
  38. J. Zuo, L. Hou, J. Shi et al., Effect of deformation induced precipitation on grain refinement and improvement of mechanical properties AA 7055 aluminum alloy, Mater. Charact. 130 (2017) 123–134 [Google Scholar]
  39. M. Zohrevand, M. Aghaie-Khafri, F. Forouzan et al., Microstructural evolutions under ultrasonic treatment in 304 and 316 austenitic stainless steels: impact of stacking fault energy, Steel Res. Int. 92 (2021) 2100041 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.