Powder-bed additive manufacturing for aerospace application: Techniques, metallic and metal/ceramic composite materials and trends
Manufacturing Rev., 6 (2019) 5
Published online: 2019-03-22
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
155 (2026)
https://doi.org/10.1016/B978-0-443-23669-3.00020-8
Application of machine learning for in-situ defect detection in metal powder bed fusion: a critical review
Addam Edwards, Du Q. Huynh, Bobby Gillham, Jincheng Wang and Timothy B. SercombeJournal of Intelligent Manufacturing (2026)
https://doi.org/10.1007/s10845-026-02869-5
Metal Eklemeli ve Geleneksel İmalat Yöntemleriyle Üretilen Alüminyum Profillerin Sıcaklık Davranışının Bulanık Mantık ve Yapay Zekâ Tabanlı Modellemesi
Koray Özsoy and Bekir AksoyFırat Üniversitesi Mühendislik Bilimleri Dergisi 37 (2) 863 (2025)
https://doi.org/10.35234/fumbd.1739022
Microstructural and physicomechanical attributes of additively manufactured high entropy alloys: a critical review
Roshith P.Canadian Metallurgical Quarterly 1 (2025)
https://doi.org/10.1080/00084433.2025.2546169
Empirical estimation of metal powder bed fusion technological improvement rate
António Alves de Campos, Bruna Torres Ferreira, Afonso Gonçalves, Marco Leite, Inês Ribeiro, Christopher L. Magee and Elsa HenriquesProgress in Additive Manufacturing 10 (5) 3673 (2025)
https://doi.org/10.1007/s40964-024-00813-8
Mechanical Properties of Titanium Alloys Produced by Additive Manufacturing: A Review
Mohaddeseh Tebianian, Seyed Reza Elmi Hosseini, Seyed Ali Mousavi Mohammadi, Mojtaba Farbakhti, Bagher Mohammad Sadeghi, Nazanin Sadat Razavi Jafari, Huo Yuan-ming and Ruifeng LiMetals and Materials International (2025)
https://doi.org/10.1007/s12540-025-02091-7
A Comprehensive Review of Additive Manufacturing for Space Applications: Materials, Advances, Challenges, and Future Directions
Stelios K. Georgantzinos, Eleni Papadopoulou, Grigorios Kostopoulos, Stefanos Voulgaris, Alexandra Tseni, Panteleimon Bakalis, Maria Gkara, Chara C. Mitropoulou and Nikos D. LagarosAdvanced Engineering Materials 27 (22) (2025)
https://doi.org/10.1002/adem.202501082
https://doi.org/10.1002/9781394313990.ch13
Development of an Advanced Printing System for Metal/Ceramic Composite Materials
Xiangyi Meng, Faris Tarlochan and Fujio TsumoriJournal of the Japan Society of Powder and Powder Metallurgy 72 (Supplement) S857 (2025)
https://doi.org/10.2497/jjspm.15P-T1-04
Characterization of Talakag clay and Kapatagan diatomite for potential ceramic robocasting application
Princess Zest Labandero, Jean N. Talondong, Lori-ann Intong-Cabalo, Raymond V. Rivera-Virtudazo and Eduardo MagdaluyoCeramics International (2025)
https://doi.org/10.1016/j.ceramint.2025.03.111
Asymptotic pathways to carbon minimization in laser powder bed fusion
Giulia Colombini, Silvio Defanti, Lucia Denti and Elena BassoliCarbon Research 4 (1) (2025)
https://doi.org/10.1007/s44246-025-00236-2
Revolutionizing transportation: an overview of 3D printing in aviation, automotive, and space industries
Zuzanna Wawryniuk, Emila Brancewicz-Steinmetz and Jacek SawickiThe International Journal of Advanced Manufacturing Technology (2024)
https://doi.org/10.1007/s00170-024-14226-y
Opportunities and limitations of metal additive manufacturing of structured catalytic converters
Fatemeh Mehdipour, Tim Delrieux, Florian Maurer, Jan-Dierk Grunwaldt, Christoph Klahn and Roland DittmeyerCatalysis Communications 187 106873 (2024)
https://doi.org/10.1016/j.catcom.2024.106873
293 (2024)
https://doi.org/10.1002/9781394238316.ch17
Porosity of Additive Manufacturing Products Obtained by Selective Electron Beam Melting
E. V. Krasnova, Yu. A. Morgunov, B. P. Saushkin and N. V. KhomyakovaElektronnaya Obrabotka Materialov 60 (3) 69 (2024)
https://doi.org/10.52577/eom.2024.60.3.69
Morphology of Pores and Spatial Voids in Ti–6Al–4V Alloy Samples Produced by Selective Electron-Beam Melting
E. V. Krasnova, Yu. A. Morgunov and B. P. SaushkinRussian Metallurgy (Metally) 2024 (3) 649 (2024)
https://doi.org/10.1134/S0036029524701076
Metal additive manufacturing: Principles and applications
S. Patel, Y. Liu, Z. Siddique and I. GhamarianJournal of Manufacturing Processes 131 1179 (2024)
https://doi.org/10.1016/j.jmapro.2024.09.101
Review of the current state-of-the-art in plasma gasification of municipal and medical waste
David A. Mauchline, Andre F. van der Merwe, Jaco van der Walt, W. du Preez, T. Becker, R. Modiba, H. Chauke, T. Dzogbewu, R. Mostert, M. Maringa, H. Bissett, W. Koen, G. ter Haar, H. van der Merwe, J. Moema, N. Botha, C. Fisher and H. WangMATEC Web of Conferences 406 05008 (2024)
https://doi.org/10.1051/matecconf/202440605008
The influence of the granulometric composition of powders of steels and precision alloys and their melting modes by LPBF ON porosity
A. S. Zhukov and P. A. KuznetsovVoprosy Materialovedeniya (1(117)) 117 (2024)
https://doi.org/10.22349/1994-6716-2024-117-1-117-126
SiC Reinforced AISI 434L Stainless Steel Thin-Wall Structure Fabrication by TIG-Aided Powder Bed Fusion Arc Additive Manufacturing (TIG PBF-AAM) Method
M. D. Aseef Khan and Manoj MasantaMetallurgical and Materials Transactions B 55 (6) 5175 (2024)
https://doi.org/10.1007/s11663-024-03326-5
59 (2024)
https://doi.org/10.1007/978-3-031-50081-7_4
Handbook of Research on Corrosion Sciences and Engineering
Loutfy MadkourAdvances in Chemical and Materials Engineering, Handbook of Research on Corrosion Sciences and Engineering 135 (2023)
https://doi.org/10.4018/978-1-6684-7689-5.ch006
Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives
Karin Hartl, Christopher Wallis, Pier Paolo Curti, Martin Bielik and Martin StockingerThe Minerals, Metals & Materials Series, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives 789 (2023)
https://doi.org/10.1007/978-3-031-27447-3_47
MODEL OF THE PHASE COMPOSITION EVOLUTION IN A METAL MELT OF A PARTICLE MADE OF COMPOSITE POWDER
Mariia A. Anisimova and Anna G. KnyazevaHigh Temperature Material Processes An International Quarterly of High-Technology Plasma Processes 27 (3) 1 (2023)
https://doi.org/10.1615/HighTempMatProc.2022046221
Influence of selective laser melting process parameters on the surface integrity of difficult-to-cut alloys: comprehensive review and future prospects
Danil Yu. Pimenov, Lucas Freitas Berti, Giuseppe Pintaude, et al.The International Journal of Advanced Manufacturing Technology 127 (3-4) 1071 (2023)
https://doi.org/10.1007/s00170-023-11541-8
195 275 (2023)
https://doi.org/10.1007/978-3-031-28744-2_12
Additively manufactured materials and structures: A state-of-the-art review on their mechanical characteristics and energy absorption
Yaozhong Wu, Jianguang Fang, Chi Wu, Cunyi Li, Guangyong Sun and Qing LiInternational Journal of Mechanical Sciences 246 108102 (2023)
https://doi.org/10.1016/j.ijmecsci.2023.108102
Calculation of Thermal Conductivity, Mechanical Properties Values at Adding Copper to a Base of Zirconia by Powder Method
Fatima W. RidhaAl-Bahir 4 (1) (2023)
https://doi.org/10.55810/2313-0083.1049
Review of high energy x-ray computed tomography for non-destructive dimensional metrology of large metallic advanced manufactured components
Wenjuan Sun, Daniel R Symes, Ceri M Brenner, Michael Böhnel, Stephen Brown, Mark N Mavrogordato, Ian Sinclair and Michael SalamonReports on Progress in Physics 85 (1) 016102 (2022)
https://doi.org/10.1088/1361-6633/ac43f6
Femtosecond Laser-Based Additive Manufacturing: Current Status and Perspectives
Atiq Basha Kaligar, Hemnath Anandan Kumar, Asghar Ali, et al.Quantum Beam Science 6 (1) 5 (2022)
https://doi.org/10.3390/qubs6010005
Additive manufactured high entropy alloys: A review on the microstructure and properties
Wei Zhang, A. Chabok, Bart J. Kooi and Yutao PeiMaterials & Design 110875 (2022)
https://doi.org/10.1016/j.matdes.2022.110875
Post-infiltration to improve the density of binder jetting ceramic parts
Qirong CHEN, Enrique JUSTE, Marie LASGORCEIX, Guillaume LEFEBVRE, Christophe TENAILLEAU, Benjamin DUPLOYER, David GROSSIN, Fabrice PETIT and Anne LERICHEJournal of the European Ceramic Society (2022)
https://doi.org/10.1016/j.jeurceramsoc.2022.08.005
Alternating chempolishing and electropolishing for interior and exterior surface finishing of additively manufactured (AM) metal components
Joshua Dillard, Andrew Grizzle, Wondwosen Demisse, et al.The International Journal of Advanced Manufacturing Technology 121 (11-12) 8159 (2022)
https://doi.org/10.1007/s00170-022-09857-y
Crack Types, Mechanisms, and Suppression Methods during High-Energy Beam Additive Manufacturing of Nickel-based Superalloys: A Review
Qingsong Wei, Yin Xie, Qing Teng, Muyu Shen, Shanshan Sun and Chao CaiChinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers 100055 (2022)
https://doi.org/10.1016/j.cjmeam.2022.100055
A Theoretical Model of the Flow Properties of Postprocessed Direct Metal Laser Sintering Ti6Al4V (ELI)
A. M. Muiruri, M. Maringa, W. du Preez and Guosong WuAdvances in Materials Science and Engineering 2022 1 (2022)
https://doi.org/10.1155/2022/4048913
Recent Advances in Alloy Development for Metal Additive Manufacturing in Gas Turbine/Aerospace Applications: A Review
Dheepa Srinivasan and Kiruthika AnanthJournal of the Indian Institute of Science 102 (1) 311 (2022)
https://doi.org/10.1007/s41745-022-00290-4
ESTIMATION OF EDDY CURRENTS AND POWER LOSSES IN THE ROTOR OF A SCREW ELECTROTHERMOMECHANICAL CONVERTER FOR ADDITIVE MANUFACTURING
Volodymyr Gritsyuk, Igor Nevliudov, Mykola Zablodskiy and Periasami SubramanianNaukovij žurnal «Tehnìka ta energetika» 13 (2) (2022)
https://doi.org/10.31548/machenergy.13(2).2022.41-49
Strain Rate and Temperature Effects in Nanoindentation Testing on Hardness in Selective Laser Melting IN718
Reem Abo Znemah, George Z. Voyiadjis, Paul Wood and Edris AkbariJournal of Engineering Materials and Technology 144 (1) (2022)
https://doi.org/10.1115/1.4051691
Influence of Epoxy Resin Curing Kinetics on the Mechanical Properties of Carbon Fiber Composites
Isidro Cruz-Cruz, Claudia A. Ramírez-Herrera, Oscar Martínez-Romero, et al.Polymers 14 (6) 1100 (2022)
https://doi.org/10.3390/polym14061100
Performance Analysis of Electro-chemical Machining of Ti-48Al-2Nb-2Cr Produced by Electron Beam Melting
Manuela Galati, Silvio Defanti and Lucia DentiSmart and Sustainable Manufacturing Systems 6 (1) 53 (2022)
https://doi.org/10.1520/SSMS20210041
Review Study on Mechanical and Thermal Properties of Ceramic Materials for Future Aerospace Applications
Nikkisha S, Rohan S, Pragyan Pattanaik Pattanaik, Ankit Kumar Mishra and Dheva DarshiniMaterials and its Characterization 1 (2) 107 (2022)
https://doi.org/10.46632/mc/1/2/7
Compressive Properties of 316L Stainless Steel Topology‐Optimized Lattice Structures Fabricated by Selective Laser Melting
Yangli Xu, Tingting Li, Xuanyang Cao, Yuanqiang Tan and Peihui LuoAdvanced Engineering Materials 23 (3) (2021)
https://doi.org/10.1002/adem.202000957
Comparison based on specific strength and density of in-situ Ti/Al and Ti/Ni metal intermetallic laminates
Nagarajan Thiyaneshwaran, Chithirai Pon Selvan, Avinash Lakshmikanthan, Katakam Sivaprasad and Balasubramanian RavisankarJournal of Materials Research and Technology (2021)
https://doi.org/10.1016/j.jmrt.2021.06.102
Closest and long-term prospects of 3D-printing for obstetrics and gynecology
E. V. Kudryavtseva, V. V. Kovalev, E. S. Zakurinova, G. Muller-Kamskii and V. V. PopovUral Medical Journal 20 (1) 76 (2021)
https://doi.org/10.52420/2071-5943-2021-20-1-76-81
Corrosion Resistance of Al–CNT Metal Matrix Composites
Vladimir V. Popov, Alla Pismenny, Natalya Larianovsky, Anna Lapteva and Daniel SafranchikMaterials 14 (13) 3530 (2021)
https://doi.org/10.3390/ma14133530
The titanium 3D-printed flute: New prospects of additive manufacturing for musical wind instruments design
A. Kolomiets, Y.J. Grobman, V. V. Popov, et al.Journal of New Music Research 50 (1) 1 (2021)
https://doi.org/10.1080/09298215.2020.1824240
Texturing and Phase Evolution in Ti-6Al-4V: Effect of Electron Beam Melting Process, Powder Re-Using, and HIP Treatment
Vladimir V. Popov, Mikhail L. Lobanov, Stepan I. Stepanov, et al.Materials 14 (16) 4473 (2021)
https://doi.org/10.3390/ma14164473
Conventional and Additively Manufactured Stainless Steels: A Review
J. R. Jessy Michla, Rajini Nagarajan, Senthilkumar Krishnasamy, et al.Transactions of the Indian Institute of Metals 74 (6) 1261 (2021)
https://doi.org/10.1007/s12666-021-02305-7
Complex Concentrated Alloys for Substitution of Critical Raw Materials in Applications for Extreme Conditions
Dumitru Mitrica, Ioana Cristina Badea, Beatrice Adriana Serban, et al.Materials 14 (5) 1197 (2021)
https://doi.org/10.3390/ma14051197
Additive and Subtractive Manufacturing of Composites
Siddharth Srivastava, Aanchna Sharma and Vinod KushvahaSpringer Series in Advanced Manufacturing, Additive and Subtractive Manufacturing of Composites 201 (2021)
https://doi.org/10.1007/978-981-16-3184-9_8
Influences of Process Parameters on the Microstructure and Mechanical Properties of CoCrFeNiTi Based High-Entropy Alloy in a Laser Powder Bed Fusion Process
Takafumi Ikeda, Makiko Yonehara, Toshi-Taka Ikeshoji, et al.Crystals 11 (5) 549 (2021)
https://doi.org/10.3390/cryst11050549
Powder Bed Fusion Additive Manufacturing Using Critical Raw Materials: A Review
Vladimir V. Popov, Maria Luisa Grilli, Andrey Koptyug, et al.Materials 14 (4) 909 (2021)
https://doi.org/10.3390/ma14040909
Processing, Characterization, and Properties of α-Al2O3-AA2900 Composites for Aerospace Brake Pad Applications
P. Ashwath, M. Anthony Xavior and Andre DL BatakoJOM 73 (12) 4365 (2021)
https://doi.org/10.1007/s11837-021-04925-2
Metal additive manufacturing in aerospace: a review
Byron Blakey-Milner, Paul Gradl, Glen Snedden, Michael Brooks, Jean Pitot, Elena Lopez, Martin Leary, Filippo Berto and Anton du PlessisMaterials & Design 110008 (2021)
https://doi.org/10.1016/j.matdes.2021.110008
02SAMA06-1 (2020)
https://doi.org/10.1109/NAP51477.2020.9309706
02SAMA08-1 (2020)
https://doi.org/10.1109/NAP51477.2020.9309718
02SAMA03-1 (2020)
https://doi.org/10.1109/NAP51477.2020.9309608
2310 020316 (2020)
https://doi.org/10.1063/5.0034329
02SAMA09-1 (2020)
https://doi.org/10.1109/NAP51477.2020.9309602
404 (2019)
https://doi.org/10.1007/978-3-446-46244-1_28