Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Investigation of Mechanical and Wear Behaviour of Al5056-Carbon Nanotube -Graphene Hybrid MMCs using Powder Metallurgy Route

Nagaraja C. Reddy, B. M. Girish, B. M. Satish, Mahesh B. Davanagere, L. Girisha, E. R. Babu and Chithirai Pon Selvan
Journal of Mines, Metals and Fuels 1906 (2024)
https://doi.org/10.18311/jmmf/2023/35156

AN OVERVIEW OF SELF-LUBRICATED ALUMINUM-BASED HYBRID COMPOSITES, PART A: SOLID LUBRICANTS AND PROCESSING ROUTE

Sweta Rani Biswal and Seshadev Sahoo
Composites: Mechanics, Computations, Applications: An International Journal 15 (2) 31 (2024)
https://doi.org/10.1615/CompMechComputApplIntJ.2023049015

Effect of particle volume fraction on wear behavior in Al–SiC MMC coated on DIN AlZnMgCu1.5 alloy

Hasan Ballikaya
Materials Testing 66 (4) 553 (2024)
https://doi.org/10.1515/mt-2023-0286

Solidification Characteristics of Ex situ Particulate-Reinforced Aluminum Matrix Composites

Saeed Farahany, Hamidreza Ghandvar and Nur Azmah Nordin
International Journal of Metalcasting 18 (1) 278 (2024)
https://doi.org/10.1007/s40962-023-01005-w

Mechanical properties and wear characterization of Al-Mg composites synthesized at different temperatures

Marek Konieczny
AIMS Materials Science 11 (2) 309 (2024)
https://doi.org/10.3934/matersci.2024017

Role of solvent composition and sintering time on the porosity of α‐alumina monoliths produced by freeze casting

Saulo Lucas Pereira da Silva, Anna Carolina Britto de Faria, Giovana Magalhães dos Santos, Camila de Lima Ribeiro, Carlos Martins Aiube, Rodrigo Nunes de Souza, João Paulo Santiago de Assis Silva, Daniel Dornellas Athayde, Luiz Fernando de Sousa Lima, Nelcy Della Santina Mohallem and Alysson Martins Almeida Silva
Journal of the American Ceramic Society (2024)
https://doi.org/10.1111/jace.19893

Investigation of Electromagnetic Shielding for Wire Mesh Composite for Aircraft against Lightning Strike

Siva Chakra Avinash Bikkina and Pappu. V. Y. Jayasree
International Journal of Electrical and Electronics Research 11 (2) 353 (2023)
https://doi.org/10.37391/ijeer.110216

A review on Aluminium based thermal interface materials for heat transfer application

Sreekumar E.N. and M.S. Senthil Saravanan
Materials Today: Proceedings 72 3036 (2023)
https://doi.org/10.1016/j.matpr.2022.08.384

The electrochemical degradation, wear behavior and machining of metal matrix composites based on 6xxx aluminum alloy with ceramic particulate reinforcements; a brief review

Abdullah Yahia Hassan, Abdulaziz Bahkali, Mohammad Yahya Meryahi, et al.
Materials Today: Proceedings 80 377 (2023)
https://doi.org/10.1016/j.matpr.2022.10.184

Magnetic, Electrical, and Physical Properties Evolution in Fe3O4 Nanofiller Reinforced Aluminium Matrix Composite Produced by Powder Metallurgy Method

Negin Ashrafi, Azmah Hanim Mohamed Ariff, Dong-Won Jung, et al.
Materials 15 (12) 4153 (2022)
https://doi.org/10.3390/ma15124153

Development of a Wire Mesh Composite Material for Aerospace Applications

S. C. A. Bikkina and P. V. Y. Jayasree
Engineering, Technology & Applied Science Research 12 (5) 9310 (2022)
https://doi.org/10.48084/etasr.5201

Effects of various fabrication techniques on the mechanical characteristics of metal matrix composites: a review

Sachin Kumar Sharma, Kuldeep Kumar Saxena, Karrar Hazim Salem, et al.
Advances in Materials and Processing Technologies 1 (2022)
https://doi.org/10.1080/2374068X.2022.2144276

Sensitivity Analysis of Reinforced Aluminum Based Metal Matrix Composites

Fouzia Gillani, Muhammad Zubair Khan and Owaisur Rahman Shah
Materials 15 (12) 4225 (2022)
https://doi.org/10.3390/ma15124225

Microstructure, Hardness, Wear Behaviours of A356/Fly Ash Composites Fabricated by Powder Metallurgy Method

Musa Yıldırım and Simge Solakoğlu
Transactions of the Indian Institute of Metals 75 (11) 2949 (2022)
https://doi.org/10.1007/s12666-022-02677-4

Frictional Behavior and Mechanical Performance of Al Reinforced with SiC via Novel Flake Powder Metallurgy

Nabeel H. Alharthi, Saud M. Almotairy and Abdulrahman M. Almutairi
Metals 12 (2) 323 (2022)
https://doi.org/10.3390/met12020323

Effects of Fused Silica Addition on Thermal Expansion, Density, and Hardness of Alumix-231 Based Composites

Luciano M. Rodrigues and Bojan A. Marinkovic
Materials 15 (10) 3476 (2022)
https://doi.org/10.3390/ma15103476

Investigation of magnetite concentrate utilization as reinforcement in aluminum matrix composites

Burak Birol, Banu Süngü Misirlioğlu and Öznur ÇAKIR
Journal of Composite Materials 56 (25) 3897 (2022)
https://doi.org/10.1177/00219983221124753

Effect of ZrO2 Nanoparticles and Mechanical Milling on Microstructure and Mechanical Properties of Al–ZrO2 Nanocomposites

Sinem Aktaş and Ege Anıl Diler
Journal of Engineering Materials and Technology 143 (4) (2021)
https://doi.org/10.1115/1.4050726

Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering

Jayavelu Sundaram, J. Udaya Prakash and Harivind Kagitha
Lecture Notes in Mechanical Engineering, Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering 389 (2021)
https://doi.org/10.1007/978-981-15-6619-6_42

Issues and Requirements for Aluminum Alloys Used in Aircraft Components: State of the Art

Pooja Dwivedi, Arshad Noor Siddiquee and Sachin Maheshwari
Russian Journal of Non-Ferrous Metals 62 (2) 212 (2021)
https://doi.org/10.3103/S1067821221020048

Effect of heat treatment on microstructure and tribological behavior of friction stir processed Al2O3-reinforced AA2024-T351 matrix

Adel Haddad, Abdessabour Benamor, Nabil Chiker, et al.
The International Journal of Advanced Manufacturing Technology 115 (5-6) 1671 (2021)
https://doi.org/10.1007/s00170-021-07237-6

Process optimization for enhanced tribological properties of Al/MWCNT composites produced by powder metallurgy using artificial neural networks

Turker Turkoglu and Sare Celik
Surface Topography: Metrology and Properties 9 (4) 045032 (2021)
https://doi.org/10.1088/2051-672X/ac3a53

Influence of Process Parameters and Reinforcements on Aluminum Hybrid Composites Developed by Powder Metallurgy Process

A. Parveen, N. R. Chauhan and M. Suhaib
Physics of Metals and Metallography 122 (10) 1007 (2021)
https://doi.org/10.1134/S0031918X21100094

Research Anthology on Reliability and Safety in Aviation Systems, Spacecraft, and Air Transport

Ch Hima Gireesh, Koona Ramji, K.G Durga Prasad and Budumuru Srinu
Research Anthology on Reliability and Safety in Aviation Systems, Spacecraft, and Air Transport 894 (2021)
https://doi.org/10.4018/978-1-7998-5357-2.ch035

TOPSIS multiobjective optimization of powder metallurgy process parameters: Al-NiTi-SiC smart composites

M. Purusothaman, S. Rajesh and R. Chokkalingam
Materials Today: Proceedings 45 6907 (2021)
https://doi.org/10.1016/j.matpr.2021.01.026

Material characterization and unconventional machining on synthesized Niobium metal matrix

C Sivakandhan, Ganesh Babu Loganathan, G Murali, et al.
Materials Research Express 7 (1) 015018 (2020)
https://doi.org/10.1088/2053-1591/ab624d

The Effect of the Processing Parameters on the Properties of the Liquid Phase Spark Plasma Sintered 80Fe-20(Al + MWCNT) Magnetic Metal Matrix Nanocomposites

Alexandre Tugirumubano, Sun Ho Go, Lee Ku Kwac, Hee Jae Shin and Hong Gun Kim
Metals 10 (7) 962 (2020)
https://doi.org/10.3390/met10070962

A Novel Detection of Defects in Al–SiC Composite by Active Pulsed Infrared Thermography Using Data and Image Processing

R. Ruban Blessed Singh, T. Sasikumar, S. Suresh and G. Ramanan
Transactions of the Indian Institute of Metals 73 (11) 2767 (2020)
https://doi.org/10.1007/s12666-020-02074-9

Addition of metallic reinforcement enhanced deformation and properties of ceramic reinforced composite by adapting ECAP with increment number of passes

P Sureshkumar, V C Uvaraja and S Rajakarunakaran
Materials Research Express 6 (8) 086502 (2019)
https://doi.org/10.1088/2053-1591/ab1b82

Influence of carbonaceous agrowastes nanoparticles on physical and Mechanical properties of friction stir processed AA7075-T651 metal matrix composites

O M Ikumapayi, E T Akinlabi and J D Majumdar
Surface Topography: Metrology and Properties 7 (3) 035013 (2019)
https://doi.org/10.1088/2051-672X/ab3aae

Production and properties of Co-based metallic-glass-reinforced aluminum matrix composites

Ziya Ozgur Yazici and Gorkem Sanan
Emerging Materials Research 8 (4) 567 (2019)
https://doi.org/10.1680/jemmr.18.00099

Study of Si3N4 reinforcement on the morphological and tribo-mechanical behaviour of aluminium matrix composites

Aasiya Parveen, Nathi Ram Chauhan and Mohd Suhaib
Materials Research Express 6 (4) 042001 (2019)
https://doi.org/10.1088/2053-1591/aaf8d8

Study of Mechanical Properties and EMI Shielding Behaviour of Al6061 Hybrid Metal Matrix Composites

Ch Hima Gireesh, Koona Ramji, K.G Durga Prasad and Budumuru Srinu
International Journal of Surface Engineering and Interdisciplinary Materials Science 7 (2) 48 (2019)
https://doi.org/10.4018/IJSEIMS.2019070104