Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

An overview of fused filament fabrication technology and the advancement in PLA-biocomposites

Mahendran Samykano, Rajan Kumaresan, Jeevendran Kananathan, Kumaran Kadirgama and Adarsh Kumar Pandey
The International Journal of Advanced Manufacturing Technology (2024)
https://doi.org/10.1007/s00170-024-13394-1

A case study of hybrid manufacturing of a Ti-6Al-4V titanium alloy hip prosthesis

António José Festas, Daniel Amaral Figueiredo, Sílvia Ribeiro Carvalho, Thang Hoang Vo, Pierre-Thomas Doutre, François Villeneuve, António Manuel Ramos and João Paulo Davim
The International Journal of Advanced Manufacturing Technology 129 (9-10) 4617 (2023)
https://doi.org/10.1007/s00170-023-12621-5

Advances in Additive Manufacturing and Metal Joining

Sayan Doloi, Atul Singh Rajput, Sajan Kapil and Manas Das
Lecture Notes in Mechanical Engineering, Advances in Additive Manufacturing and Metal Joining 161 (2023)
https://doi.org/10.1007/978-981-19-7612-4_14

Evaluation of Shape Properties in Hybrid Laser-powder Bed Fusion Additive Manufacturing Process

Pil-Ho Lee, Yeo-Ul Song, Yongrae Kim, Segon Heo and Chang-Woo Lee
Journal of the Korean Society of Manufacturing Technology Engineers 32 (6) 309 (2023)
https://doi.org/10.7735/ksmte.2023.32.6.309

Effects of Electrode Negative Pulsing Ratio in Direct Energy Deposition via Variable-Polarity Cold Metal Transfer Process on the Deposition Behavior and Microstructural Characteristics

Tae Hyun Lee, Cheolhee Kim and Minjung Kang
Metals 12 (3) 475 (2022)
https://doi.org/10.3390/met12030475

Top Surface Roughness Modeling for Robotic Wire Arc Additive Manufacturing

Heping Chen , Ahmed Yaseer and Yuming Zhang 
Journal of Manufacturing and Materials Processing 6 (2) 39 (2022)
https://doi.org/10.3390/jmmp6020039

Metal hybrid additive manufacturing: state-of-the-art

Eyob Messele Sefene, Yeabsra Mekdim Hailu and Assefa Asmare Tsegaw
Progress in Additive Manufacturing 7 (4) 737 (2022)
https://doi.org/10.1007/s40964-022-00262-1

Parametric Study and Investigations of Bead Geometries of GMAW-Based Wire–Arc Additive Manufacturing of 316L Stainless Steels

Rakesh Chaudhari, Heet Parmar, Jay Vora and Vivek K. Patel
Metals 12 (7) 1232 (2022)
https://doi.org/10.3390/met12071232

Processes of Physical Treatment of Stainless Steels Obtained by Additive Manufacturing

Artem Babaev, Vladimir Promakhov, Nikita Schulz, et al.
Metals 12 (9) 1449 (2022)
https://doi.org/10.3390/met12091449

Development of an Automated Process Chain for Hybrid Additive Manufacturing using Laser Powder Bed Fusion

Lukas Langer, Matthias Schmitt, Georg Schlick and Johannes Schilp
Procedia CIRP 112 358 (2022)
https://doi.org/10.1016/j.procir.2022.09.009

Comparative Study on H20 Steel Billets: Additive Manufacturing vs. Powder Metallurgy

S. Nasar, L. J. Baruch, S. J. Vijay, et al.
Physics of Metals and Metallography 122 (5) 515 (2021)
https://doi.org/10.1134/S0031918X21050100

Powder Bed Fusion Additive Manufacturing Using Critical Raw Materials: A Review

Vladimir V. Popov, Maria Luisa Grilli, Andrey Koptyug, et al.
Materials 14 (4) 909 (2021)
https://doi.org/10.3390/ma14040909

Review on additive hybrid- and multi-material-manufacturing of metals by powder bed fusion: state of technology and development potential

M. Schneck, M. Horn, M. Schmitt, et al.
Progress in Additive Manufacturing 6 (4) 881 (2021)
https://doi.org/10.1007/s40964-021-00205-2

Hydrogen Embrittlement of the Additively Manufactured High-Strength X3NiCoMoTi 18-9-5 Maraging Steel

Angelina Strakosova, Michaela Roudnická, Ondřej Ekrt, Dalibor Vojtěch and Alena Michalcová
Materials 14 (17) 5073 (2021)
https://doi.org/10.3390/ma14175073

Interface Joint Strength between SS316L Wrought Substrate and Powder Bed Fusion Built Parts

Jason M. Weaver, John R. Linn and Michael P. Miles
Materials 14 (11) 3041 (2021)
https://doi.org/10.3390/ma14113041

Current trends and research opportunities in hybrid additive manufacturing

Ugur M. Dilberoglu, Bahar Gharehpapagh, Ulas Yaman and Melik Dolen
The International Journal of Advanced Manufacturing Technology 113 (3-4) 623 (2021)
https://doi.org/10.1007/s00170-021-06688-1

Capability of Multi-Material Laser-Based Powder Bed Fusion—Development and Analysis of a Prototype Large Bore Engine Component

Matthias Schneck, Max Horn, Maik Schindler and Christian Seidel
Metals 12 (1) 44 (2021)
https://doi.org/10.3390/met12010044

Functionally Graded Materials Manufactured by Direct Energy Deposition: A review

D. Dev Singh, Suresh Arjula and A. Raji Reddy
Materials Today: Proceedings 47 2450 (2021)
https://doi.org/10.1016/j.matpr.2021.04.536

Ultrasound in situ characterization of hybrid additively manufactured Ti6Al4V

Luz D. Sotelo, Rakesh Karunakaran, Cody S. Pratt, Michael P. Sealy and Joseph A. Turner
The Journal of the Acoustical Society of America 150 (6) 4452 (2021)
https://doi.org/10.1121/10.0008972

Closest and long-term prospects of 3D-printing for obstetrics and gynecology

E. V. Kudryavtseva, V. V. Kovalev, E. S. Zakurinova, G. Muller-Kamskii and V. V. Popov
Ural Medical Journal 20 (1) 76 (2021)
https://doi.org/10.52420/2071-5943-2021-20-1-76-81

Effect of Laser Processing on Surface Properties of Additively Manufactured 18-Percent Nickel Maraging Steel Parts

Olegas Černašėjus, Jelena Škamat, Vladislav Markovič, Nikolaj Višniakov and Simonas Indrišiūnas
Coatings 10 (6) 600 (2020)
https://doi.org/10.3390/coatings10060600