EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Manufacturing Rev., 1 (2014) 2 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

In Situ Neutron Diffraction Study of Strain Evolution and Load Partitioning During Elevated Temperature Tensile Test in HIP-Treated Electron Beam Powder Bed Fusion Manufactured Ti-6Al-4V

K. Pandian, M. Neikter, M. Ekh, S. Harjo, T. Kawasaki, R. Woracek, T. Hansson and R. Pederson
JOM 77 (4) 1803 (2025)
https://doi.org/10.1007/s11837-025-07128-1

An improved thermomechanical model for the prediction of stress and strain evolution in proximity to the melt pool in powder bed fusion additive manufacturing

Pegah Pourabdollah, Farzaneh Farhang-Mehr, Steve Cockcroft, Daan Maijer and Asmita Chakraborty
Computational Mechanics 75 (3) 953 (2025)
https://doi.org/10.1007/s00466-024-02545-6

Process parameters for three-dimensional specimens made of Ti6Al4V materials using additive manufacturing: A review

Marichamy Marimuthu and Chockalingam Kunjan
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 239 (4) 2310 (2025)
https://doi.org/10.1177/09544089231223020

Vapor chemical composition in electron beam powder bed fusion using Ti–6Al–4V powder

Vinicius G. Antunes, Abderzak el Farsy, Angela Crespi, Charles Ballage, Ovidiu Vasilovici, Patrick Chapon, Camille Petit-Etienne, Erwine Pargon and Tiberiu Minea
The International Journal of Advanced Manufacturing Technology 132 (9-10) 5103 (2024)
https://doi.org/10.1007/s00170-024-13553-4

Multivariate process capability analysis for evaluating metal additive manufacturing via electron beam melting

Wadea Ameen, Moath Alatefi, Abdulrahman Al-Ahmari, Murtadha Aldoukhi, Atef M Ghaleb and Abdullah Yahia Alfaify
Materials Research Express 11 (9) 096516 (2024)
https://doi.org/10.1088/2053-1591/ad7923

Electron beam melting additive manufacturing process efficiency study of stainless steel

Elroei Damri, Itzhak Orion, Yaron I. Ganor, Dor Braun and Eitan Tiferet
Progress in Additive Manufacturing 9 (6) 1579 (2024)
https://doi.org/10.1007/s40964-023-00522-8

Advancements in micromachining of additive manufactured materials: a comprehensive review

P. Manikandan and K. Venkatesan
Materials and Manufacturing Processes 39 (11) 1469 (2024)
https://doi.org/10.1080/10426914.2024.2362621

The impact of Ti6Al4V powder reuse on the quality of electron beam powder bed fusion parts

R. Borrelli, C. Bellini, F. Berto, V. Di Cocco, P. Foti, F. Iacoviello, L. P. Mocanu, C. Pirozzi, N. Razavi and S. Franchitti
Progress in Additive Manufacturing 9 (5) 1475 (2024)
https://doi.org/10.1007/s40964-023-00560-2

A review on recent advancements in additive manufacturing techniques

Dushyant Dubey, Satinder Paul Singh and Bijoya Kumar Behera
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2024)
https://doi.org/10.1177/09544089241275860

Powder Bed Fusion Techniques in Metal 3D Printing: A Review

Rehbar Khan, Inayat Rasool, Mohammad Afzal and Ateeb Ahmad Khan
Applied Mechanics and Materials 922 67 (2024)
https://doi.org/10.4028/p-nY5hlx

Enhancing powder bed fusion of alumina ceramic material: a comprehensive study from powder tailoring to mechanical performance evaluation

Mohamed Abdelmoula, Gökhan Küçüktürk, Enrique Juste and Fabrice Petit
The International Journal of Advanced Manufacturing Technology 131 (3-4) 1745 (2024)
https://doi.org/10.1007/s00170-024-13158-x

The effects of varying wall thickness on the surface roughness of Ti-6Al-4V by electron beam powder bed fusion

Lucas C B Carolo, Robert E Cooper O, Marcelo F de Oliveira and Jorge V L da Silva
Surface Topography: Metrology and Properties 11 (3) 035012 (2023)
https://doi.org/10.1088/2051-672X/acf67c

Process-structure-property considerations for wire-based directed energy deposition of Ti-6Al-4V

Hannah Sims, Jonathan Pegues, Shaun Whetten, Andrew B. Kustas and David Moore
Materials Characterization 205 113280 (2023)
https://doi.org/10.1016/j.matchar.2023.113280

Influences of Post-Heat Treatment on the Microstructure Evolution and Creep Properties of Ni-Based Superalloy IN718 Fabricated by Electron Beam Melting

Thaviti Naidu Palleda, Santhosh Banoth, Yen-Ling Kuo and Koji Kakehi
Metals 12 (3) 446 (2022)
https://doi.org/10.3390/met12030446

Basic Mechanism of Surface Topography Evolution in Electron Beam Based Additive Manufacturing

Christoph Breuning, Julian Pistor, Matthias Markl and Carolin Körner
Materials 15 (14) 4754 (2022)
https://doi.org/10.3390/ma15144754

Fatigue behaviour of laser powder bed fusion (L-PBF) Ti–6Al–4V, Al–Si–Mg and stainless steels: a brief overview

L. Afroz, R. Das, M. Qian, M. Easton and M. Brandt
International Journal of Fracture 235 (1) 3 (2022)
https://doi.org/10.1007/s10704-022-00641-3

Effect of build orientation on wear and erosion behavior of maraging steel processed by powder bed fusion using laser beam (PBF-LB)

Jaydeep Vishwakarma, K Chattopadhyay and N C Santhi Srinivas
Surface Topography: Metrology and Properties 10 (4) 045006 (2022)
https://doi.org/10.1088/2051-672X/ac998f

Effect of HIP Defects on the Mechanical Properties of Additive Manufactured Ti6Al4V Alloy

Ohad Dolev, Tomer Ron, Eli Aghion and Amnon Shirizly
Metals 12 (7) 1210 (2022)
https://doi.org/10.3390/met12071210

Selective Electron Beam Melting (SEBM) of Pure Tungsten: Metallurgical Defects, Microstructure, Texture and Mechanical Properties

Xin Ren, Hui Peng, Jingli Li, et al.
Materials 15 (3) 1172 (2022)
https://doi.org/10.3390/ma15031172

Predicting the Strength of EBAM 3D Printed Ti-6Al-4V from Processing Conditions

Tanya Johnson, Abbey Peters, D. Gary Harlow and Christina Viau Haden
Metals 12 (3) 431 (2022)
https://doi.org/10.3390/met12030431

Experimental Investigation of the Tribological Contact between Ti6Al4V-EBM Pin and UHMWPE Rotating Sheet for Prosthetic Applications

Annamaria Visco, Fabio Giudice, Eugenio Guglielmino, Cristina Scolaro and Andrea Sili
Metals 12 (9) 1526 (2022)
https://doi.org/10.3390/met12091526

Additive manufacturing of bulk metallic glasses: Fundamental principle, current/future developments and applications

H.R. Lashgari, M. Ferry and S. Li
Journal of Materials Science & Technology (2022)
https://doi.org/10.1016/j.jmst.2021.09.068

Effect of processing parameters on pore structures, grain features, and mechanical properties in Ti-6Al-4V by laser powder bed fusion

Qixiang Luo, Lu Yin, Timothy W. Simpson and Allison M. Beese
Additive Manufacturing 56 102915 (2022)
https://doi.org/10.1016/j.addma.2022.102915

Investigating the Stress Corrosion Cracking (SCC) Susceptibility of Ti-6Al-4V Alloys Fabricated by Electron Beam Melting in Deep-Sea Environment

Yang Zhao, Yuchen Liu, Xin Gai, Yun Bai, Tao Zhang, Dake Xu and Fuhui Wang
Corrosion 77 (8) 853 (2021)
https://doi.org/10.5006/3822

Printing functional metallic 3D parts using a hybrid friction-surfacing additive manufacturing process

Esraa S. Abdelall, Abdullah F. Al-Dwairi, Shatha Mahmoud Al-Raba’a and Mohamed Eldakroury
Progress in Additive Manufacturing 6 (4) 731 (2021)
https://doi.org/10.1007/s40964-021-00193-3

Novel Characterization Techniques for Additive Manufacturing Powder Feedstock

Benjamin Young, Joseph Heelan, Sean Langan, et al.
Metals 11 (5) 720 (2021)
https://doi.org/10.3390/met11050720

Numerical simulation for electron beam selective melting PBF additive manufacturing of molybdenum

Muhammad Qasim Zafar, Chaochao Wu, Haiyan Zhao, Du Kai and Qianming Gong
The International Journal of Advanced Manufacturing Technology 117 (5-6) 1575 (2021)
https://doi.org/10.1007/s00170-021-07671-6

Topological, Mechanical and Biological Properties of Ti6Al4V Scaffolds for Bone Tissue Regeneration Fabricated with Reused Powders via Electron Beam Melting

Maria Laura Gatto, Riccardo Groppo, Nora Bloise, et al.
Materials 14 (1) 224 (2021)
https://doi.org/10.3390/ma14010224

Improving mechanical properties of wire‐based EBAM Ti‐6Al‐4V parts by adding TiC powders

Alexey V. Panin, Marina S. Kazachenok, Elena A. Sinyakova, et al.
Material Design & Processing Communications 3 (1) (2021)
https://doi.org/10.1002/mdp2.136

Powder Reuse Cycles in Electron Beam Powder Bed Fusion—Variation of Powder Characteristics

Gitanjali Shanbhag and Mihaela Vlasea
Materials 14 (16) 4602 (2021)
https://doi.org/10.3390/ma14164602

A review on metallurgical aspects of laser additive manufacturing (LAM): Stainless steels, nickel superalloys, and titanium alloys

Kh. Moeinfar, F. Khodabakhshi, S.F. Kashani-bozorg, M. Mohammadi and A.P. Gerlich
Journal of Materials Research and Technology (2021)
https://doi.org/10.1016/j.jmrt.2021.12.039

Progress on In Situ and Operando X-ray Imaging of Solidification Processes

Shyamprasad Karagadde, Chu Lun Alex Leung and Peter D. Lee
Materials 14 (9) 2374 (2021)
https://doi.org/10.3390/ma14092374

Effects of Gas Pressure during Electron Beam Energy Deposition in the EBM Additive Manufacturing Process

Elroei Damri, Eitan Tiferet, Dor Braun, et al.
Metals 11 (4) 601 (2021)
https://doi.org/10.3390/met11040601

Metal Material, Properties and Design Methods of Porous Biomedical Scaffolds for Additive Manufacturing: A Review

Yuting Lv, Binghao Wang, Guohao Liu, et al.
Frontiers in Bioengineering and Biotechnology 9 (2021)
https://doi.org/10.3389/fbioe.2021.641130

Physico-Chemical Challenges in 3D Printing of Polymeric Nanocomposites and Hydrogels for Biomedical Applications

Massimo Bonini
Journal of Nanoscience and Nanotechnology 21 (5) 2778 (2021)
https://doi.org/10.1166/jnn.2021.19063

Investigation of Solidification and Precipitation Behavior of Si-Modified 7075 Aluminum Alloy Fabricated by Laser-Based Powder Bed Fusion

Guichuan Li, Suraj Dinkar Jadhav, Arturo Martín, et al.
Metallurgical and Materials Transactions A 52 (1) 194 (2021)
https://doi.org/10.1007/s11661-020-06073-9

Searching for Rheological Conditions for FFF 3D Printing with PVC Based Flexible Compounds

I. Calafel, R. H. Aguirresarobe, M. I. Peñas, et al.
Materials 13 (1) 178 (2020)
https://doi.org/10.3390/ma13010178

Influence of hot isostatic pressing and surface finish on the mechanical behaviour of Ti6Al4V processed by electron beam melting

Stefania Franchitti, Carmine Pirozzi and Rosario Borrelli
Fatigue & Fracture of Engineering Materials & Structures 43 (12) 2828 (2020)
https://doi.org/10.1111/ffe.13295

The Effect of Post-Processing on the Mechanical Behavior of Ti6Al4V Manufactured by Electron Beam Powder Bed Fusion for General Aviation Primary Structural Applications

Carmine Pirozzi, Stefania Franchitti, Rosario Borrelli, Antonio Chiariello and Luigi Di Palma
Aerospace 7 (6) 75 (2020)
https://doi.org/10.3390/aerospace7060075

Microstructure and Compressive Behavior of Ti-6Al-4V Alloy Built by Electron Beam Free-Form Fabrication

Vasiliy A. Klimenov, Vasiliy V. Fedorov, Mikhail S. Slobodyan, et al.
Journal of Materials Engineering and Performance 29 (11) 7710 (2020)
https://doi.org/10.1007/s11665-020-05223-9

Can Appropriate Thermal Post-Treatment Make Defect Content in as-Built Electron Beam Additively Manufactured Alloy 718 Irrelevant?

Sneha Goel, Kévin Bourreau, Jonas Olsson, Uta Klement and Shrikant Joshi
Materials 13 (3) 536 (2020)
https://doi.org/10.3390/ma13030536

Finite element framework for electron beam melting process simulation

Muhammad Qasim Zafar, Chao Chao Wu, Haiyan Zhao, Jinnan Wang and Xingjian Hu
The International Journal of Advanced Manufacturing Technology 109 (7-8) 2095 (2020)
https://doi.org/10.1007/s00170-020-05707-x

Tribological Properties of Additive Manufactured Materials for Energy Applications: A Review

Alessandro M. Ralls, Pankaj Kumar and Pradeep L. Menezes
Processes 9 (1) 31 (2020)
https://doi.org/10.3390/pr9010031

Cost Modeling and Evaluation of Direct Metal Laser Sintering with Integrated Dynamic Process Planning

Lei Di and Yiran Yang
Sustainability 13 (1) 319 (2020)
https://doi.org/10.3390/su13010319

Additive manufacturing of isotropic-grained, high-strength and high-ductility copper alloys

Wenlong Lu, Wenzheng Zhai, Jian Wang, et al.
Additive Manufacturing 101751 (2020)
https://doi.org/10.1016/j.addma.2020.101751

State of the Art and Future Trends in Material Modeling

Enes Sert, Andreas Öchsner, Leonhard Hitzler, Ewald Werner and Markus Merkel
Advanced Structured Materials, State of the Art and Future Trends in Material Modeling 100 349 (2019)
https://doi.org/10.1007/978-3-030-30355-6_14

Powders for powder bed fusion: a review

Silvia Vock, Burghardt Klöden, Alexander Kirchner, Thomas Weißgärber and Bernd Kieback
Progress in Additive Manufacturing 4 (4) 383 (2019)
https://doi.org/10.1007/s40964-019-00078-6

Pilot Feedback Electronic Imaging at Elevated Temperatures and its Potential for In-Process Electron Beam Melting Monitoring

Hay Wong, Derek Neary, Eric Jones, Peter Fox and Chris Sutcliffe
Additive Manufacturing (2019)
https://doi.org/10.1016/j.addma.2019.02.022

Pilot capability evaluation of a feedback electronic imaging system prototype for in-process monitoring in electron beam additive manufacturing

Hay Wong, Derek Neary, Eric Jones, Peter Fox and Chris Sutcliffe
The International Journal of Advanced Manufacturing Technology 100 (1-4) 707 (2019)
https://doi.org/10.1007/s00170-018-2702-6

Tensile and Creep Properties Improvement of Ti-6Al-4V Alloy Specimens Produced by Electron Beam Powder Bed Fusion Additive Manufacturing

Placido Aliprandi, Fabio Giudice, Eugenio Guglielmino and Andrea Sili
Metals 9 (11) 1207 (2019)
https://doi.org/10.3390/met9111207

Material characterisation using electronic imaging for Electron Beam Melting process monitoring

Hay Wong, Rebecca Garrard, Kate Black, Peter Fox and Chris Sutcliffe
Manufacturing Letters (2019)
https://doi.org/10.1016/j.mfglet.2019.12.005

Thermofluid Properties of Ti-6Al-4V Melt Pool in Powder-Bed Electron Beam Additive Manufacturing

M Shafiqur Rahman, Paul J. Schilling, Paul D. Herrington and Uttam K. Chakravarty
Journal of Engineering Materials and Technology 141 (4) (2019)
https://doi.org/10.1115/1.4043342

Benchmarking Spatial Resolution in Electronic Imaging for Potential In-Situ Electron Beam Melting Monitoring

Hay Wong, Derek Neary, Eric Jones, Peter Fox and Chris Sutcliffe
Additive Manufacturing 100829 (2019)
https://doi.org/10.1016/j.addma.2019.100829

Multi-scale modeling of selective electron beam melting of Ti6Al4V titanium alloy

Trong-Nhan Le, Yu-Lung Lo and Hong-Chuong Tran
The International Journal of Advanced Manufacturing Technology 105 (1-4) 545 (2019)
https://doi.org/10.1007/s00170-019-04188-x

Additive manufacturing of Ti-45Al-4Nb-C by selective electron beam melting for automotive applications

V. Juechter, M.M. Franke, T. Merenda, et al.
Additive Manufacturing (2018)
https://doi.org/10.1016/j.addma.2018.05.008

Effect of Hot Isostatic Pressure treatment on the Electron-Beam Melted Ti-6Al-4V specimens

Vladimir Popov, Alexander Katz-Demyanetz, Andrey Garkun, et al.
Procedia Manufacturing 21 125 (2018)
https://doi.org/10.1016/j.promfg.2018.02.102

Additive Manufacturing of Alloy 718 via Electron Beam Melting: Effect of Post-Treatment on the Microstructure and the Mechanical Properties

Arun Balachandramurthi, Johan Moverare, Satyapal Mahade and Robert Pederson
Materials 12 (1) 68 (2018)
https://doi.org/10.3390/ma12010068

Evaluation of 3D-printed parts by means of high-performance computer tomography

Elena Lopez, Tomás Felgueiras, Christian Grunert, Frank Brückner, Mirko Riede, André Seidel, Axel Marquardt, Christoph Leyens and Eckhard Beyer
Journal of Laser Applications 30 (3) (2018)
https://doi.org/10.2351/1.5040644

Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications

Sneha Goel, Jonas Olsson, Magnus Ahlfors, Uta Klement and Shrikant Joshi
The Minerals, Metals & Materials Series, Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications 115 (2018)
https://doi.org/10.1007/978-3-319-89480-5_6

FROM METALLURGY OF GRANULES TO ADDITIVE TECHNOLOGIES

A. N. Timofeev and A. I. Logacheva
Izvestiya Vuzov Tsvetnaya Metallurgiya (Proceedings of Higher Schools Nonferrous Metallurgy (3) 84 (2018)
https://doi.org/10.17073/0021-3438-2018-3-84-94

Pilot Investigation of Feedback Electronic Image Generation in Electron Beam Melting and its Potential for In-Process Monitoring

Hay Wong, Derek Neary, Sohail Shahzad, et al.
Journal of Materials Processing Technology (2018)
https://doi.org/10.1016/j.jmatprotec.2018.10.016

Sintering Behavior and Microstructure of TiC-Me Composite Powder Prepared by SHS

Elena Korosteleva, Victoria Korzhova and Maksim Krinitcyn
Metals 7 (8) 290 (2017)
https://doi.org/10.3390/met7080290

Lighter structures for transports: The role of innovation in metallurgy

Alexis Deschamps, Guilhem Martin, Rémy Dendievel and Hugo P. Van Landeghem
Comptes Rendus. Physique 18 (7-8) 445 (2017)
https://doi.org/10.1016/j.crhy.2017.09.006

Mathematical modelling of thermal and kinetic phenomena in electron-beam technologies

A G Knyazeva, I L Pobol and V N Demidov
IOP Conference Series: Materials Science and Engineering 140 012021 (2016)
https://doi.org/10.1088/1757-899X/140/1/012021

Relationship between the microstructure and mechanical properties of an equiatomic AlCoCrFeNi high-entropy alloy fabricated by selective electron beam melting

Hiroshi Shiratori, Tadashi Fujieda, Kenta Yamanaka, et al.
Materials Science and Engineering: A 656 39 (2016)
https://doi.org/10.1016/j.msea.2016.01.019

An experimental investigation into the dimensional error of powder-binder three-dimensional printing

M. N. Islam and Samuel Sacks
The International Journal of Advanced Manufacturing Technology 82 (5-8) 1371 (2016)
https://doi.org/10.1007/s00170-015-7482-7

TMS 2016: 145thAnnual Meeting & Exhibition: Supplemental Proceedings

Pan Wang, Mui Ling Sharon Nai, Xipeng Tan, et al.
TMS 2016: 145thAnnual Meeting & Exhibition: Supplemental Proceedings 1 (2016)
https://doi.org/10.1002/9781119274896.ch1

Micro-tube fabricating path compensation method research

Youping Gong, Yunpeng Lv, Shaohui Su, Zhihua Li and Guojin Chen
The International Journal of Advanced Manufacturing Technology 85 (9-12) 2277 (2016)
https://doi.org/10.1007/s00170-015-8301-x

Selective laser melting-wire arc additive manufacturing hybrid fabrication of Ti-6Al-4V alloy: microstructure and mechanical properties

Xuezhi Shi, Shuyuan Ma, Changmeng Liu, et al.
Materials Science and Engineering: A (2016)
https://doi.org/10.1016/j.msea.2016.12.065

Mechanical properties of additive-manufactured porous titanium bio-structures with oriented macro-scale channels

Ahmad Basalah, Shahrzad Esmaeili and Ehsan Toyserkani
The International Journal of Advanced Manufacturing Technology 84 (9-12) 2239 (2016)
https://doi.org/10.1007/s00170-015-7849-9

Electrical discharge machining of electron beam melting formed shrouded blisk

Wei Liang, Xiaoming Kang, Wansheng Zhao and Yuxuan Yang
The International Journal of Advanced Manufacturing Technology (2016)
https://doi.org/10.1007/s00170-016-8545-0