Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Grain size effect on transferability in micro-coining process assisted by ultrasonic vibration

Tetsuhide Shimizu, Shingo Kosuge, Ming Yang

Manufacturing Rev., 2 (2015) 5

Published online: 2015-04-03

DOI: https://doi.org/10.1051/mfreview/2015006

This article has been cited by the following article(s):

Analysis of Flow Processes during Micro-Coining of Cold-Worked and Nanocrystalline CuZn30 Alloy

Leonie Frohnapfel, Paul Braun, Enrico Bruder and Karsten Durst
Journal of Materials Engineering and Performance (2026)
https://doi.org/10.1007/s11665-026-13961-5

Radial ultrasonic-assisted soft mold roll forming for high-quality microchannel structures: defect mitigation and surface enhancement

Zhenwu Ma, Qiansen Lv, Zhuangzhuang Wang, Jialin Zhu, Quanwei Ma, Chunju Wang and Yuanjing Zhang
International Journal of Material Forming 19 (2) (2026)
https://doi.org/10.1007/s12289-026-02033-7

Research on ultrasound-assisted low-constraint deformation law and scale effect of ultra-thin fiber metal laminates

Jiajun Yang, Yao Wang, Xuchang Niu, Da Cheng, Kang Liu, Chao Yang, Libin Zhao and Ning Hu
Composites Part A: Applied Science and Manufacturing 190 108705 (2025)
https://doi.org/10.1016/j.compositesa.2024.108705

Study on size effect affected multi-stage micro deep drawing forming directly using pure titanium foils

Peisheng Han, Jixin Yang, Zixing Cheng, Yulin Xing, Xiaoyu Zhu and Xiaogang Wang
Materials Today Communications 111214 (2024)
https://doi.org/10.1016/j.mtcomm.2024.111214

Nanoscale patterning of metallic surfaces with laser patterned tools using a nanoimprinting approach

Paul Braun, Philipp Grützmacher, Leonie Frohnapfel, Frank Mücklich and Karsten Durst
Applied Surface Science 613 155786 (2023)
https://doi.org/10.1016/j.apsusc.2022.155786

Influence of ultrasound on forming force in thin sheetmetal microforming using molten plastic as flexible punch

Rui-xiang Yang, Bei Wang, Bin Xu, Cheng Qi, Wan-ying He, Chun-yang Zhao, Li-kuan Zhu and Feng Luo
Materials & Design 110239 (2021)
https://doi.org/10.1016/j.matdes.2021.110239

A review on the microblanking technology of metallic foils

Kaisheng Ji, Yanxiong Liu, Shuaiying Liu and Yijun Zhang
The International Journal of Advanced Manufacturing Technology 114 (11-12) 3185 (2021)
https://doi.org/10.1007/s00170-021-07096-1

A Multiple Length-Scales Nanoimprinting Approach on Nanocrystalline and Strongly Deformed CuZn30 Alloys

Paul Braun and Karsten Durst
Scientific Reports 10 (1) (2020)
https://doi.org/10.1038/s41598-020-58874-y

Ultrasonic-assisted extrusion of ZK60 Mg alloy micropins at room temperature

Yan Lou, Xiao Liu, Jinsong He and Min Long
Ultrasonics (2017)
https://doi.org/10.1016/j.ultras.2017.03.012

Study of micro flexible rolling based on grained inhomogeneity

Feijun Qu, Zhengyi Jiang, Dongbin Wei, Qingqiang Chen and Haina Lu
International Journal of Mechanical Sciences 123 324 (2017)
https://doi.org/10.1016/j.ijmecsci.2017.02.009

Nano/Micro Proccesing

Journal of the Japan Society for Technology of Plasticity 56 (655) 670 (2015)
https://doi.org/10.9773/sosei.56.670