Open Access
Issue
Manufacturing Rev.
Volume 2, 2015
Article Number 5
Number of page(s) 5
DOI https://doi.org/10.1051/mfreview/2015006
Published online 03 April 2015
  1. M. Geiger, M. Kleiner, R. Eckstein, N. Tiesler, U. Engel, Microforming, CIRP Ann.–Manuf. Technol. 50–2 (2001) 445–462. [CrossRef] [Google Scholar]
  2. F. Vollertsen, D. Biermann, H.N. Hansen, I.S. Jawahir, K. Kuzman, Size effect in manufacturing of metallic components, CIRP Ann.–Manuf. Technol. 58 (2009) 566–587. [CrossRef] [Google Scholar]
  3. H. Justinger, G. Hirt, Estimation of grain size and grain orientation influence in microforming processes by Taylor factor considerations, J. Mater. Process. Technol. 209 (2009) 2111–2121. [CrossRef] [Google Scholar]
  4. Y. Saotome, T. Zhang, A. Inoue, Microforming of MEMS parts with amorphous alloys, Mater. Res. Soc. Symp. Proc. 554 (1999) 385–390. [CrossRef] [Google Scholar]
  5. W.J. Kim, S.J. Yoo, H.K. Kim, Superplastic microforming of Mg–9Al–1Zn alloy with ultrafine-grained microstructure, Scr. Mater. 59–6 (2008) 599–602. [CrossRef] [Google Scholar]
  6. Y. Saotome, K. Imai, S. Shioda, S. Shimizu, T. Zhang, A. Inoue, The micro-nanoformability of Pt-based metallic glass and the nanoforming of three-dimensional structures, Intermet. 10 (2002) 1241–1247. [CrossRef] [Google Scholar]
  7. M. Yang, H. Tanabe, T. Shimizu, High-density energy assisted micro forming for fabrication of metallic devices, Proc. 15th Int. Conf. Adv. Mater. Process. Technol. (2012) (AMPT2012) CD-ROM. [Google Scholar]
  8. Y. Bai, M. Yang, Investigation on mechanism of metal foil surface finishing with vibration-assisted micro-forging, J. Mater. Process. Technol. 213–3 (2013) 330–336. [CrossRef] [Google Scholar]
  9. Y. Bai, M. Yang, Optimization of metal foils surface finishing using vibration-assisted micro-forging, J. Mater. Process. Technol. 214–1 (2014) 21–28. [CrossRef] [Google Scholar]
  10. Kosuge S., Yang M., Improvement in processing accuracy of micro parts by ultrasonic vibration assisted forging, Proc. 15th Int. Conf. Adv. Mater. Process. Technol. (2012) (AMPT2012) CD-ROM. [Google Scholar]
  11. Q. Zheng, T. Shimizu, T. Shiratori, M. Yang, Tensile properties and constitutive model of ultrathin pure titanium foils at elevated temperatures in microforming assisted by resistance heating method, Mater. Des. 63 (2014) 389–397. [CrossRef] [Google Scholar]
  12. T. Shimizu, M. Ogawa, M. Yang, K. Manabe, Plastic anisotropy of ultra-thin rolled phosphor bronze foils and its thickness strain evolution in micro-deep drawing, Mater. Des. 56 (2014) 604–612. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.