Submit your paper

EDPS Account

Home

Volume 2 (2015)

Free Access to the whole issue

Manufacturing Review

Volume 2 (2015)

Export the citation of the selected articles Export
Select all

Open Access

Comparative analysis of aluminium surface roughness in end-milling under dry and minimum quantity lubrication (MQL) conditions 30

Ugochukwu C. Okonkwo, Imhade P. Okokpujie, Jude E. Sinebe and Chinedu A.K. Ezugwu

Published online: 12 January 2016

DOI: https://doi.org/10.1051/mfreview/2015033

Open Access

Effect of welding parameters on mechanical properties of GTAW of UNS S31803 and UNS S32750 weldments 29

Prabhu Paulraj and Rajnish Garg

Published online: 18 December 2015

DOI: https://doi.org/10.1051/mfreview/2015032

Open Access

Tool-life prediction under multi-cycle loading during metal forming: a feasibility study 28

Yiran Hu, Xi Yuan, Guojia Ma, M.A. Masen and Liliang Wang

Published online: 15 December 2015

DOI: https://doi.org/10.1051/mfreview/2015031

Open Access

An experimental and numerical study of micro deep drawing of SUS304 circular cups 27

Liang Luo, Zhengyi Jiang, Dongbin Wei, Ken-Ichi Manabe, Hideki Sato, Xiaofeng He and Pengfei Li

Published online: 27 November 2015

DOI: https://doi.org/10.1051/mfreview/2015029

Open Access

Mechanical and tribological studies on nano particles reinforced hybrid aluminum based composite 26

Aniruddha V. Muley, S. Aravindan and I.P. Singh

Published online: 27 November 2015

DOI: https://doi.org/10.1051/mfreview/2015028

Open Access

Effect of post-welding heat treatment on wear resistance of cast-steel die with surfacing layer 25

Wujiao Xu, Xin Ma, Nongjie Tang, Li Zhu, Wuhua Li and Yongfeng Ding

Published online: 17 November 2015

DOI: https://doi.org/10.1051/mfreview/2015027

Open Access

Feasibility study of the microforming combined with selective chemical vapor deposition 24

Kazushi Koshimizu, Tetsuhide Shimizu and Ming Yang

Published online: 17 November 2015

DOI: https://doi.org/10.1051/mfreview/2015026

Open Access

Structuring by electromagnetic forming and by forming with an elastomer punch as a tool for component optimisation regarding mechanical stiffness and acoustic performance 23

Verena Psyk, Petr Kurka, Simon Kimme, Markus Werner, Dirk Landgrebe, Andreas Ebert and Mathias Schwarzendahl

Published online: 17 November 2015

DOI: https://doi.org/10.1051/mfreview/2015025

Open Access

Development of micro rotary swaging tools of graded tool steel via co-spray forming 22

Chengsong Cui, Alwin Schulz, Matthias Steinbacher, Eric Moumi, Bernd Kuhfuss, Florian Böhmermann and Oltmann Riemer

Published online: 17 November 2015

DOI: https://doi.org/10.1051/mfreview/2015024

Open Access

Modeling and optimization of Electrical Discharge Machining (EDM) using statistical design 21

Husein A. Hegab, Mohamed H. Gadallah and Amal K. Esawi

Published online: 17 November 2015

DOI: https://doi.org/10.1051/mfreview/2015023

Open Access

Modeling and optimization of laser cutting operations 20

Mohamed Hassan Gadallah and Hany Mohamed Abdu

Published online: 26 October 2015

DOI: https://doi.org/10.1051/mfreview/2015020

Open Access

Material modelling and its application to creep-age forming of aluminium alloy 7B04 19

Aaron C.L. Lam, Zhusheng Shi, Xia Huang, Yo-Lun Yang, Yuansong Zeng and Jianguo Lin

Published online: 26 October 2015

DOI: https://doi.org/10.1051/mfreview/2015022

Open Access

Effects of sintering temperature on the densification of WC-6Co cemented carbides sintered by coupled multi-physical-fields activated technology 18

Yu Zhou, Yi Yang, Gang Yang, Deqiang Yin, Yi Qin and Jian Liu

Published online: 26 October 2015

DOI: https://doi.org/10.1051/mfreview/2015017

Open Access

Identification of environmental bottleneck using Bayesian Networks: a case study of an Indian pig iron manufacturing organization 17

Parag Sen

Published online: 26 October 2015

DOI: https://doi.org/10.1051/mfreview/2015021

Open Access

Innovative cold joining technologies based on tube forming 16

Luis M. Alves, Carlos M.A. Silva and Paulo A.F. Martins

Published online: 18 September 2015

DOI: https://doi.org/10.1051/mfreview/2015019

Open Access

Review

Nano and hybrid aluminum based metal matrix composites: an overview 15

Aniruddha V. Muley, S. Aravindan and I.P. Singh

Published online: 13 August 2015

DOI: https://doi.org/10.1051/mfreview/2015018

Open Access

Erratum

Erratum to: The influences of filament temperature on the structure of boron nitride films and its tribological characterization for microforming die application 14

Yong Jin, Shigeo Yasuhara, Tetsuhide Shimizu and Ming Yang

Published online: 08 July 2015

DOI: https://doi.org/10.1051/mfreview/2015016

Open Access

Micro-texturing into DLC/diamond coated molds and dies via high density oxygen plasma etching 13

Ersyzario Edo Yunata and Tatsuhiko Aizawa

Published online: 03 July 2015

DOI: https://doi.org/10.1051/mfreview/2015015

Open Access

Deformation behavior of an electrodeposited nano-Ni/amorphous Fe₇₈Si₉B₁₃ laminated composite sheet 12

Kaifeng Zhang, Shaosong Jiang and Xifeng Li

Published online: 24 June 2015

DOI: https://doi.org/10.1051/mfreview/2015012

Open Access

Hot semi-punching and cold scrap removing processes for hot stamping of ultra-high strength steel parts 11

Ken-ichiro Mori, Tomoyoshi Maeno and Takuya Suganami

Published online: 29 May 2015

DOI: https://doi.org/10.1051/mfreview/2015014

Open Access

Hierarchical patterning by multi-step micro-imprinting with layered materials 10

Fujio Tsumori, Lijan Shen, Toshiko Osada and Hideshi Miura

Published online: 01 May 2015

DOI: https://doi.org/10.1051/mfreview/2015008

Open Access

Effects of grain size on the sheared surface in micropiercing of austenitic stainless steel SUS304 9

Tomomi Shiratori, Yohei Suzuki, Shizuka Nakano, Ming Yang and Takafumi Komatsu

Published online: 01 May 2015

DOI: https://doi.org/10.1051/mfreview/2015013

Open Access

Ni/GO nanocomposites and its plasticity 8

You Li, Guofeng Wang, Qi Liu and Mo Yang

Published online: 29 April 2015

DOI: https://doi.org/10.1051/mfreview/2015011

Open Access

Study of micro electromagnetic bulging on a stainless steel foil 7

Qing-juan Zhao, Chun-ju Wang, Jie Xu, De-bin Shan and Bin Guo

Published online: 23 April 2015

DOI: https://doi.org/10.1051/mfreview/2015010

Open Access

Development of microforming process combined with thin film transfer printing 6

Kazushi Koshimizu, Qiu Zheng, Tetsuhide Shimizu and Ming Yang

Published online: 08 April 2015

DOI: https://doi.org/10.1051/mfreview/2015009

Open Access

Grain size effect on transferability in micro-coining process assisted by ultrasonic vibration 5

Tetsuhide Shimizu, Shingo Kosuge and Ming Yang

Published online: 03 April 2015

DOI: https://doi.org/10.1051/mfreview/2015006

Open Access

The influences of filament temperature on the structure of boron nitride films and its tribological characterization for microforming die application 4

Yong Jin, Shigeo Yasuhara, Tetsuhide Shimizu and Ming Yang

Published online: 25 March 2015

DOI: https://doi.org/10.1051/mfreview/2015007

Open Access

Effect of heat on tensile properties of thin pure titanium foils 3

Qiu Zheng, Tetsuhide Shimizu and Ming Yang

Published online: 18 March 2015

DOI: https://doi.org/10.1051/mfreview/2015005

Open Access

Plasma assisted nitriding for micro-texturing onto martensitic stainless steels 2

Takahisa Katoh, Tatsuhiko Aizawa and Tetsuya Yamaguchi

Published online: 17 March 2015

DOI: https://doi.org/10.1051/mfreview/2015004

Open Access

Micro-deformation behavior in micro-compression with high-purity aluminum processed by ECAP 1

Jie Xu, Chenxi Wang, Debin Shan, Bin Guo and Terence G. Langdon

Published online: 17 March 2015

DOI: https://doi.org/10.1051/mfreview/2015003