EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Volume 2 (2015) Manufacturing Rev., 2 (2015) 11 References
Open Access
Issue
Manufacturing Rev.
Volume 2, 2015
Article Number 11
Number of page(s) 8
DOI https://doi.org/10.1051/mfreview/2015014
Published online 29 May 2015
  1. M. Eriksson, M. Oldenburg, M.C. Somani, L.P. Karjalainen, Testing and evaluation of material data for analysis of forming and hardening of boron steel components, Modelling and Simulation in Materials Science and Engineering 10 (2002) 277–294. [CrossRef] [Google Scholar]
  2. P. Hein, A global approach of the finite element simulation of hot stamping, Advanced Materials Research 6 (2005) 763–770. [CrossRef] [Google Scholar]
  3. M. Geiger, M. Merklein, C. Hoff, Basic investigations on the hot stamping steel 22MnB5, Advanced Materials Research 6 (2005) 795–802. [CrossRef] [Google Scholar]
  4. K. Mori, S. Maki, Y. Tanaka, Warm and hot stamping of ultra high tensile strength steel sheets using resistance heating, CIRP Annals – Manufacturing Technology 54 (2005) 209–212. [Google Scholar]
  5. P.F. Bariani, S. Bruschi, A. Ghiotti, A. Turetta, Testing formability in the hot stamping of HSS, CIRP Annals – Manufacturing Technology 57 (2008) 265–268. [CrossRef] [Google Scholar]
  6. M. Merklein, J. Lechler, M. Geiger, Investigation of the thermo-mechanical properties of hot stamping steels, Journal of Materials Processing Technology 174 (2006) 452–455. [Google Scholar]
  7. H. So, H. Hoffmann, R. Golle, Blanking of press hardened ultra high strength steel, Proceedings of 2nd International Conference on Hot Sheet Metal Forming of High-Performance Steel, Luleå, 2009, pp. 137–146. [Google Scholar]
  8. I. Valls, B. Casas, N. Rodríguez, Improving die durability in hot stamping and hard cutting, Proceedings of 2nd International Conference on Hot Sheet Metal Forming of High-Performance Steel, Luleå, 2009, pp. 331–338. [Google Scholar]
  9. K. Nothhaft, J. Suh, M. Golle, I. Picas, D. Casellas, W. Volk, Shear cutting of press hardened steel: influence of punch chamfer on process forces, tool stresses and sheared edge qualities, Production Engineering 6 (2012) 413–420. [CrossRef] [Google Scholar]
  10. M. Fritz, Process optimization of laser cutting and in the heating process, Proceedings of 3rd International Conference on Hot Sheet Metal Forming of High-Performance Steel, Kassel, 2011, pp. 239–245. [Google Scholar]
  11. I. Picas, R. Hernández, D. Casellas, I. Valls, Cold cutting of microstructurally tailored hot formed components, Proceedings of 2nd International Conference on Hot Sheet Metal Forming of High-Performance Steel, Luleå, 2009, pp. 115–125. [Google Scholar]
  12. K. Mori, K. Okuda, Tailor die quenching in hot stamping for producing ultra-high strength steel formed parts having strength distribution, CIRP Annals – Manufacturing Technology 59 (2010) 291–294. [CrossRef] [Google Scholar]
  13. K. Mori, T. Maeno, K. Mongkolkaji, Tailored die quenching of steel parts having strength distribution using bypass resistance heating in hot stamping, Journal of Materials Processing Technology 213 (2013) 508–514. [Google Scholar]
  14. T. Maeno, K. Mori, T. Nagai, Improvement in formability by control of temperature in hot stamping of ultra-high strength steel parts, CIRP Annals – Manufacturing Technology 63 (2014) 301–304. [CrossRef] [Google Scholar]
  15. K. Mori, T. Maeno, S. Fujisaka, Punching of ultra-high strength steel sheets using local resistance heating of shearing zone, Journal of Materials Processing Technology 212 (2012) 534–540. [CrossRef] [Google Scholar]
  16. K. Mori, T. Maeno, Y. Maruo, Punching of small hole of die-quenched steel sheets using local resistance heating, CIRP Annals – Manufacturing Technology 61 (2012) 255–258. [Google Scholar]
  17. H. So, D. Faßmann, H. Hoffmann, R. Golle, M. Schaper, An investigation of the blanking process of the quenchable boron alloyed steel 22MnB5 before and after hot stamping process, Journal of Materials Processing Technology 212 (2012) 437–449. [Google Scholar]
  18. H.S. Choi, B.M. Kim, D.H. Kim, D.-C. Ko, Application of mechanical trimming to hot stamped 22MnB5 parts for energy saving, International Journal of Precision Engineering and Manufacturing 15 (2014) 1087–1093. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.