Free Access to the whole issue

Manufacturing Review

Volume 3 (2016)

Export the citation of the selected articles Export
Select all

Special Issue - Additive Manufacturing Materials & Devices

Open Access

Influence of laser power on tensile properties and material characteristics of laser-sintered UHMWPE 15

Yas Khalil, Adam Kowalski and Neil Hopkinson

Published online: 28 September 2016

DOI: https://doi.org/10.1051/mfreview/2016015

Open Access

Review

Integration of additive manufacturing and inkjet printed electronics: a potential route to parts with embedded multifunctionality 12

Jonathan Stringer, Talal M. Althagathi, Christopher C.W. Tse, Van Duong Ta, Jonathan D. Shephard, Emre Esenturk, Colm Connaughton, Thomas J. Wasley, Ji Li, Robert W. Kay and Patrick J. Smith

Published online: 26 July 2016

DOI: https://doi.org/10.1051/mfreview/2016011

Open Access

Review

Design for additive manufacturing of composite materials and potential alloys: a review 11

Hussien A. Hegab

Published online: 05 July 2016

DOI: https://doi.org/10.1051/mfreview/2016010

Open Access

Dry ice blasting as a substitution for the conventional electroplating pre-treatments 22

Eckart Uhlmann, El Mustapha Baira and Robert Jaczkowski

Published online: 23 December 2016

DOI: https://doi.org/10.1051/mfreview/2016023

Open Access

Solution electrospinning of particle-polymer composite fibres 21

Lasse Christiansen and Peter Fojan

Published online: 20 December 2016

DOI: https://doi.org/10.1051/mfreview/2016013

Open Access

Nanomechanical properties and thermal decomposition of Cu-Al₂O₃ composites for FGM applications 20

Elias P. Koumoulos, Ioannis A. Kartsonakis, Asterios Bakolas and Costas A. Charitidis

Published online: 20 December 2016

DOI: https://doi.org/10.1051/mfreview/2016022

Open Access

Thermal and mechanical improvement of aluminum open-cells foams through electrodeposition of copper and graphene 19

Alessandro Simoncini, Nadia Ucciardello and Vincenzo Tagliaferri

Published online: 20 December 2016

DOI: https://doi.org/10.1051/mfreview/2016021

Open Access

The production-distribution problem with order acceptance and package delivery: models and algorithm 18

Majid Khalili, M. Esmailpour and B. Naderi

Published online: 28 October 2016

DOI: https://doi.org/10.1051/mfreview/2016018

Open Access

In memory of Professor He Yang 17

Yi Qin

Published online: 28 October 2016

DOI: https://doi.org/10.1051/mfreview/2016019

Open Access

Determination of the Interfacial Heat Transfer Coefficient in the Hot Stamping of AA7075 16

Kang Ji, Xiaochuan Liu, Omer El Fakir, Jun Liu, Qunli Zhang and Liliang Wang

Published online: 24 October 2016

DOI: https://doi.org/10.1051/mfreview/2016017

Open Access

Unified constitutive modelling for two-phase lamellar titanium alloys at hot forming conditions 14

Lei Yang, Nan Li, Baoyu Wang, Jianguo Lin, Huijun Zhao and Wenyu Ma

Published online: 23 September 2016

DOI: https://doi.org/10.1051/mfreview/2016016

Open Access

Review

Investigations on dry sliding of laser cladded aluminum bronze 13

Hannes Freiße, Anika Langebeck, Henry Köhler, Thomas Seefeld and Frank Vollertsen

Published online: 26 July 2016

DOI: https://doi.org/10.1051/mfreview/2016012

Open Access

The present status and future growth of maintenance in US manufacturing: results from a pilot survey 10

Xiaoning Jin, David Siegel, Brian A. Weiss, Ellen Gamel, Wei Wang, Jay Lee and Jun Ni

Published online: 20 June 2016

DOI: https://doi.org/10.1051/mfreview/2016005

Open Access

Hot stamping of an Al-Li alloy: a feasibility study 9

Haoxiang Gao, Tianxin Weng, Jun Liu, Chang Li, Zhiqiang Li and Liliang Wang

Published online: 16 May 2016

DOI: https://doi.org/10.1051/mfreview/2016006

Open Access

Hot stamping of AA6082 tailor welded blanks: experiment and FE simulation 8

Jun Liu, Haoxiang Gao, Omer El Fakir, Liliang Wang and Jianguo Lin

Published online: 03 May 2016

DOI: https://doi.org/10.1051/mfreview/2016009

Open Access

Continuous extrusion and rolling forming of copper strips 7

Xinbing Yun, Mo Zhou, Tian Tian and Ying Zhao

Published online: 13 April 2016

DOI: https://doi.org/10.1051/mfreview/2016007

Open Access

Investigation into initiation and propagation of cracks in the coated surfaces of spur gears with submodelling and irreversible cohesive-zone modelling techniques 6

Jiling Feng, Yi Qin and Hanshan Dong

Published online: 13 April 2016

DOI: https://doi.org/10.1051/mfreview/2016008

Open Access

Low temperature high density plasma nitriding of stainless steel molds for stamping of oxide glasses 5

Tatsuhiko Aizawa, Tatsuya Fukuda and Hiroshi Morita

Published online: 15 March 2016

DOI: https://doi.org/10.1051/mfreview/2016004

Open Access

Tribological impact of the finishing technology onto meso- and microforming processes 4

Stephan F. Jahn, Benedikt Müller, Felix S. Hilfinger and Andreas Schubert

Published online: 08 March 2016

DOI: https://doi.org/10.1051/mfreview/2016003

Open Access

Iterative process control and sensor evaluation for deep drawing tools with integrated piezoelectric actuators 3

Tobias Bäume, Wolfgang Zorn, Welf-Guntram Drossel and Gerd Rupp

Published online: 26 February 2016

DOI: https://doi.org/10.1051/mfreview/2016002

Open Access

Innovative approaches for controlling the material flow in sheet-bulk metal forming processes 2

Marion Merklein, Michael Lechner, Daniel Gröbel, Maria Löffler, Thomas Schneider, Robert Schulte and Philipp Hildenbrand

Published online: 05 February 2016

DOI: https://doi.org/10.1051/mfreview/2016001

Open Access

Digitalization of automotive industry – scenarios for future manufacturing 1

Steven Peters, Jung-Hoon Chun and Gisela Lanza

Published online: 26 January 2016

DOI: https://doi.org/10.1051/mfreview/2015030

Manufacturing Review

Volume 3 (2016)

Special Issue - Additive Manufacturing Materials & Devices

Influence of laser power on tensile properties and material characteristics of laser-sintered UHMWPE 15

Integration of additive manufacturing and inkjet printed electronics: a potential route to parts with embedded multifunctionality 12

Design for additive manufacturing of composite materials and potential alloys: a review 11

Dry ice blasting as a substitution for the conventional electroplating pre-treatments 22

Solution electrospinning of particle-polymer composite fibres 21

Nanomechanical properties and thermal decomposition of Cu-Al2O3 composites for FGM applications 20

Thermal and mechanical improvement of aluminum open-cells foams through electrodeposition of copper and graphene 19

The production-distribution problem with order acceptance and package delivery: models and algorithm 18

In memory of Professor He Yang 17

Determination of the Interfacial Heat Transfer Coefficient in the Hot Stamping of AA7075 16

Unified constitutive modelling for two-phase lamellar titanium alloys at hot forming conditions 14

Investigations on dry sliding of laser cladded aluminum bronze 13

The present status and future growth of maintenance in US manufacturing: results from a pilot survey 10

Hot stamping of an Al-Li alloy: a feasibility study 9

Hot stamping of AA6082 tailor welded blanks: experiment and FE simulation 8

Continuous extrusion and rolling forming of copper strips 7

Investigation into initiation and propagation of cracks in the coated surfaces of spur gears with submodelling and irreversible cohesive-zone modelling techniques 6

Low temperature high density plasma nitriding of stainless steel molds for stamping of oxide glasses 5

Tribological impact of the finishing technology onto meso- and microforming processes 4

Iterative process control and sensor evaluation for deep drawing tools with integrated piezoelectric actuators 3

Innovative approaches for controlling the material flow in sheet-bulk metal forming processes 2

Digitalization of automotive industry – scenarios for future manufacturing 1

Nanomechanical properties and thermal decomposition of Cu-Al₂O₃ composites for FGM applications 20