Open Access Effect of heat treatment on gravity die-cast Sc-A356 aluminium alloy 3 Ying Pio Lim, Wei Hong Yeo and Azliana Masita Published online: 13 April 2017 DOI: https://doi.org/10.1051/mfreview/2017003 AbstractFull HTMLPDF (4.364 MB)ePUB (2.417 MB)References
Open Access Review Additive (nano)manufacturing perspectives: the use of nanofillers and tailored materials 12 Elias P. Koumoulos, Eleni Gkartzou and Costas A. Charitidis Published online: 10 November 2017 DOI: https://doi.org/10.1051/mfreview/2017012 AbstractFull HTMLPDF (1.041 MB)ePUB (2.352 MB)References
Open Access Thermal stability and field assisted sintering of cerium-doped YSZ ceramic nanoparticles obtained via a hydrothermal process 11 Dumitru V. Dragut, Viorel Badilita, Adrian M. Motoc, Radu R. Piticescu, Jie Zhao, Hasan Hijji and Luca Conte Published online: 14 August 2017 DOI: https://doi.org/10.1051/mfreview/2017009 AbstractFull HTMLPDF (2.067 MB)ePUB (2.384 MB)References
Open Access Towards green carbon fibre manufacturing from waste cotton: a microstructural and physical property investigation 10 Pravin Jagdale, Elias P. Koumoulos, Irene Cannavaro, Aamer Khan, Micaela Castellino, Dimitrios A. Dragatogiannis, Alberto Tagliaferro and Costas A. Charitidis Published online: 18 August 2017 DOI: https://doi.org/10.1051/mfreview/2017008 AbstractFull HTMLPDF (2.383 MB)ePUB (3.729 MB)References
Open Access Process design based on FE simulations and experiments of forging a complex-shaped magnesium alloy adaptor 9 Wenchen Xu, Chuan Yang, Debin Shan and Bin Guo Published online: 11 August 2017 DOI: https://doi.org/10.1051/mfreview/2017007 AbstractFull HTMLPDF (5.473 MB)ePUB (6.333 MB)References
Open Access FE modeling of a complete warm-bending process for optimal design of heating stages for the forming of large-diameter thin-walled Ti–6Al–4V tubes 8 Zhijun Tao, Heng Li, Jun Ma, Heng Yang, Chao Lei and Guangjun Li Published online: 04 August 2017 DOI: https://doi.org/10.1051/mfreview/2017010 AbstractFull HTMLPDF (4.582 MB)ePUB (7.601 MB)References
Open Access Advanced characterization of by-product carbon film obtained by thermal chemical vapor deposition during CNT manufacturing 7 Aikaterini-Flora A. Trompeta, Elias P. Koumoulos, Ioannis A. Kartsonakis and Costas A. Charitidis Published online: 02 June 2017 DOI: https://doi.org/10.1051/mfreview/2017006 AbstractFull HTMLPDF (5.785 MB)ePUB (5.375 MB)References
Open Access Microstructure-sensitive flow stress modeling for force prediction in laser assisted milling of Inconel 718 6 Zhipeng Pan, Yixuan Feng, Yu-Ting Lu, Yu-Fu Lin, Tsung-Pin Hung, Fu-Chuan Hsu, Chiu-Feng Lin, Ying-Cheng Lu and Steven Y. Liang Published online: 23 May 2017 DOI: https://doi.org/10.1051/mfreview/2017005 AbstractFull HTMLPDF (3.168 MB)ePUB (7.353 MB)References
Open Access Review Material microstructure affected machining: a review 5 Zhipeng Pan, Yixuan Feng and Steven Y. Liang Published online: 23 May 2017 DOI: https://doi.org/10.1051/mfreview/2017004 AbstractFull HTMLPDF (3.774 MB)ePUB (4.764 MB)References
Open Access A feasibility study on different NDT techniques used for testing bond quality in cold roll bonded Al-Sn alloy/steel bimetal strips 4 Philipp Johannes Tallafuss, Andrzej Rosochowski and Sylvia Campbell Published online: 12 May 2017 DOI: https://doi.org/10.1051/mfreview/2017002 AbstractFull HTMLPDF (8.843 MB)ePUB (8.127 MB)References
Open Access Advancement in corrosion resistance of AA 2024-T3 through sol-gel coatings including nanocontainers 2 Ioannis A. Kartsonakis, Elias P. Koumoulos and Costas A. Charitidis Published online: 23 February 2017 DOI: https://doi.org/10.1051/mfreview/2017001 AbstractFull HTMLPDF (13.37 MB)ePUB (10.66 MB)References
Open Access Production and 3D printing processing of bio-based thermoplastic filament 1 Eleni Gkartzou, Elias P. Koumoulos and Costas A. Charitidis Published online: 09 January 2017 DOI: https://doi.org/10.1051/mfreview/2016020 AbstractFull HTMLPDF (5.909 MB)ePUB (8.504 MB)References