Open Access
Manufacturing Rev.
Volume 4, 2017
Article Number 12
Number of page(s) 9
Published online 10 November 2017
  1. M. Gebler, A.J.M. Schoot Uiterkamp, C. Visser, A global sustainability perspective on 3D printing technologies, Energy Policy 85 (2015) 511 [CrossRef] [Google Scholar]
  2. R. D'Aveni, The 3-D printing revolution, Harv. Bus. Rev. (2015) 40–48 [Google Scholar]
  3. L. Fang, S. Chen, T. Fang, J. Fang, C. Lu, Z. Xu, Compos. Sci. Technol. 138 (2017) 106–116 [CrossRef] [Google Scholar]
  4. G. Ji, P. Zhang, J. Nji, M. John, G. Li, Recent Advances in Smart Self-healing Polymers and Composites, edited by G. Li, H. Meng (2015) pp. 293–363, ISBN: 978-1-78242-280-8 [CrossRef] [Google Scholar]
  5. M. Naebe K. Shirvanimoghaddam, Appl. Mater. Today 5 (2016) 223–245 [CrossRef] [Google Scholar]
  6. E. Gkartzou, E.P. Koumoulos, C.A. Charitidis, Manuf. Rev. 4 (2017) 1 [Google Scholar]
  7. F.C. Campbell, Structural composite materials, ASM Int. 05287G (2010) 10–27 [Google Scholar]
  8. C. Baillie, Green composites, in: Polymer Composites and the Environment, CRC Press, Taylor & Francis, 2005, ISBN 9780849325762 [Google Scholar]
  9. Y.S. Song, J.R. Youn, T.G. Gutowski, Compos. Appl. Sci. Manuf. 40 (8) (2009) 1257–1265 [Google Scholar]
  10. E.P. Koumoulos, D.A. Dragatogiannis, I.A. Kartsonakis, E. Karaxi, T. Kehagias, C.A. Charitidis, Int. J. Struct. Integr. 7 (2016) 671–689 [CrossRef] [Google Scholar]
  11. E.P. Koumoulos, T. Parousis, A.F.A. Trompeta, I.A. Kartsonakis, C.A. Charitidis, Plast. Rubber Compos. 45 (2016) 106–117 [CrossRef] [Google Scholar]
  12. E.P. Koumoulos, I.A. Kartsonakis, A. Bakolas, C.A. Charitidis, Manuf. Rev. 3 (2016) 20 [EDP Sciences] [Google Scholar]
  13. E.P. Koumoulos, P. Jagadale, A. Lorenzi, A. Tagliaferro, C.A. Charitidis, Compos., Eng. 80 (2015) 27–36 [CrossRef] [Google Scholar]
  14. E.P. Koumoulos, P. Jagdale, I.A. Kartsonakis, M. Giorcelli, A. Tagliaferro, C.A. Charitidis, Polym. Compos. 36 (2015) 1432–1446 [CrossRef] [Google Scholar]
  15. Additive manufacturing: Print me a jet engine, The Economist, The Economist Newspaper Limited, 2012 [Google Scholar]
  16. 3D printing: A third-world dimension, The Economist, The Economist Newspaper Limited, 2012 [Google Scholar]
  17. 3D printing scales up, The Economist, The Economist Newspaper Limited, 2013 [Google Scholar]
  18. D.S. Engstrom, B. Porter, M. Pacios, H. Bhaskaran, Additive nanomanufacturing − a review, J. Mater. Res. 29 (2014) 1792–1816 [Google Scholar]
  19. O. Ivanova, C. Williams, T. Campbell, Additive manufacturing (AM) and nanotechnology: promises and challenges, Rapid Prototyp. J. 19 (2013) 353–364 [CrossRef] [Google Scholar]
  20. H.N. Chia, B.M. Wu, Recent advances in 3D printing of biomaterials. J. Biol. Eng. 9 (2015) 1–14 [CrossRef] [PubMed] [Google Scholar]
  21. I. Volyanskii, I.V. Shishkovsky, Laser-assisted 3D printing of functional graded structures from polymer covered nanocomposites: a self-review, in: Igor Shishkovsky (Ed.), New Trends in 3D Printing, InTech, 2016 [Google Scholar]
  22. T.A. Campbell, O.S. Ivanova, 3D printing of multifunctional nanocomposites, Nanotoday 8 (2013) 119–120 [CrossRef] [EDP Sciences] [Google Scholar]
  23. R. Winkler, F.P. Schmidt, U. Haselmann, J.D. Fowlkes, B.B. Lewis, G. Kothleitner, P.D. Rack, H. Plank, Direct-write 3D nanoprinting of plasmonic structures, ACS Appl. Mater.Interfaces 9 (2017) 8233–8240 [CrossRef] [Google Scholar]
  24. R. D. Farahani, M. Dubé, D. Therriault, Three-dimensional printing of multifunctional nanocomposites: manufacturing techniques and applications, Adv. Mater. 28 (2016) 5794–5821 [CrossRef] [Google Scholar]
  25. J.W. Lee, 3D Nanoprinting technologies for tissue engineering applications, J. Nanomater. 2015 (2015) 1–14 [Google Scholar]
  26. J.W. Lee, 3D Nanoprinting technologies for tissue engineering applications, J. Nanomater. 2015 (2015) 14 Article ID 213521, doi:10.1155/2015/213521 [Google Scholar]
  27. M.C. O'Brien, B. Benjamin, F. Scott, L.G. Zhang, Tissue Eng. Rev. 21 (2014) 103–114 [CrossRef] [Google Scholar]
  28. S.F.A. Acquah, B.E. Leonhardt, M.S. Nowotarski, J.M. Magi, K.A. Chambliss, T.E.S. Venzel, S.D. Delekar, L.A. Al-Hariri, Carbon nanotubes and graphene as additives in 3D printing, in: Mohamed Berber (Ed.), Carbon Nanotubes-Current Progress of their Polymer Composites, InTech, 2016 [Google Scholar]
  29. K. Chizari, M. Daoud, A.R. Ravindran, D. Therriault, 3D Printing of highly conductive nanocomposites for the functional optimization of liquid sensors, Small 12 (2016) 6076–6082 [CrossRef] [Google Scholar]
  30. A.K. Au, W. Huynh, L.F. Horowitz, A. Folch, 3D-printed microfluidics, Angew. Chem. Int. Ed. 55 (2016) 3862–3881 [CrossRef] [Google Scholar]
  31. K.N. Ren, J. Zhou, H. Wu, Materials for microfluidic chip fabrication, Acc. Chem. Res. 46 (2013) 2396–2406 [CrossRef] [Google Scholar]
  32. [Google Scholar]
  33. M. Nofara, M.C. Heuzey, P.J. Carreaub, M.R. Kamal, J. Randall. J. Rheol. 60 (2016) 637 [CrossRef] [Google Scholar]
  34. K. Prashantha, F. Roger. J. Macromol. Sci. 54 (2016) 24–29 [CrossRef] [Google Scholar]
  35. S. Tofail, E.P. Koumoulos, A. Bandyopadhyay, S. Bose, L. Donoghue, C. Charitidis, Mater. Today, in press (2017), [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.