Manufacturing Review

Open Access

Analysis of multipoint cutting tool temperature using FEM and CFD 16

Meenaskshi Sundaram Nagaraj, Chakaravarthy Ezhilarasan, A. John Presin Kumar and Rishab Betala

Published online: 26 November 2018

DOI: https://doi.org/10.1051/mfreview/2018013

• Full HTML
• PDF (1.022 MB)
• ePUB (2.510 MB)
• References

Open Access

Forces prediction in micro-grinding single-crystal copper considering the crystallographic orientation 15

Man Zhao, Xia Ji, Beizhi Li and Steven Y. Liang

Published online: 21 November 2018

DOI: https://doi.org/10.1051/mfreview/2018014

• Full HTML
• PDF (1.775 MB)
• ePUB (3.404 MB)
• References

Open Access

Performance of pulsed-electrochemical honing and pulsed-electrochemical finishing in improving quality of bevel gears 14

Sunil Pathak and Neelesh Kumar Jain

Published online: 24 October 2018

DOI: https://doi.org/10.1051/mfreview/2018012

• Full HTML
• PDF (4.372 MB)
• ePUB (4.577 MB)
• References

Open Access

Review

A review on magnetically assisted abrasive finishing and their critical process parameters 13

Chinu Kumari and Sanjay Kumar Chak

Published online: 23 October 2018

DOI: https://doi.org/10.1051/mfreview/2018010

• Full HTML
• PDF (3.932 MB)
• ePUB (5.113 MB)
• References

Open Access

An experimental research on the machinability of a high temperature titanium alloy BTi-6431S in turning process 12

Yanfeng Gao, Yongbo Wu, Jianhua Xiao and Dong Lu

Published online: 19 September 2018

DOI: https://doi.org/10.1051/mfreview/2018011

• Full HTML
• PDF (4.744 MB)
• ePUB (3.146 MB)
• References

Open Access

Effect of the thickness reduction of specimens on the limit strains in thermomechanical tensile tests for hot-stamping studies 11

Connor Lane, Zhutao Shao, Kailun Zheng and Jianguo Lin

Published online: 14 September 2018

DOI: https://doi.org/10.1051/mfreview/2018009

• Full HTML
• PDF (2.120 MB)
• ePUB (2.532 MB)
• References

Open Access

Review

A review on the modeling and simulations of solid-state diffusional phase transformations in metals and alloys 10

Xueyan Liu, Hongwei Li and Mei Zhan

Published online: 27 July 2018

DOI: https://doi.org/10.1051/mfreview/2018008

• Full HTML
• PDF (1.702 MB)
• ePUB (2.649 MB)
• References

Open Access

Review

The methodologies and strategies for the development of novel material systems and coatings for applications in extreme environments − a critical review 9

Marina Urbina, Antonio Rinaldi, Santiago Cuesta-Lopez, Arcadii Sobetkii, Anca Elena Slobozeanu, Peter Szakalos, Yi Qin, Mythili Prakasam, Radu-Robert Piticescu, Cedric Ducros and Alain Largeteau

Published online: 16 July 2018

DOI: https://doi.org/10.1051/mfreview/2018006

• Full HTML
• PDF (2.208 MB)
• ePUB (2.746 MB)
• References

Open Access

Review

Green chemistry solutions for sol–gel micro-encapsulation of phase change materials for high-temperature thermal energy storage 8

Maria Dolores Romero-Sanchez, Radu-Robert Piticescu, Adrian Mihail Motoc, Francisca Aran-Ais and Albert Ioan Tudor

Published online: 01 June 2018

DOI: https://doi.org/10.1051/mfreview/2018003

• Full HTML
• PDF (2.818 MB)
• ePUB (2.012 MB)
• References

Open Access

Review

The effect of process parameters in Aluminum Metal Matrix Composites with Powder Metallurgy 7

Vemula Vijaya Vani and Sanjay Kumar Chak

Published online: 13 June 2018

DOI: https://doi.org/10.1051/mfreview/2018001

• Full HTML
• PDF (5.981 MB)
• ePUB (3.969 MB)
• References

Open Access

Review

Nanofinishing of freeform/sculptured surfaces: state-of-the-art 6

Leeladhar Nagdeve, V.K. Jain and J. Ramkumar

Published online: 01 June 2018

DOI: https://doi.org/10.1051/mfreview/2018005

• Full HTML
• PDF (4.603 MB)
• ePUB (5.344 MB)
• References

Open Access

Prediction of surface roughness and cutting force under MQL turning of AISI 4340 with nano fluid by using response surface methodology 5

Pralhad B. Patole and Vivek V. Kulkarni

Published online: 01 June 2018

DOI: https://doi.org/10.1051/mfreview/2018002

• Full HTML
• PDF (2.857 MB)
• ePUB (3.050 MB)
• References

Open Access

Review

Solvothermal method as a green chemistry solution for micro-encapsulation of phase change materials for high temperature thermal energy storage 4

Albert Ioan Tudor, Adrian Mihail Motoc, Cristina Florentina Ciobota, Dan. Nastase Ciobota, Radu Robert Piticescu and Maria Dolores Romero-Sanchez

Published online: 23 May 2018

DOI: https://doi.org/10.1051/mfreview/2018004

• Full HTML
• PDF (2.334 MB)
• ePUB (2.693 MB)
• References

Open Access

Finite element design procedure for correcting the coining die profiles 3

Paulo Alexandrino, Paulo J Leitão, Luis M Alves and Paulo A.F. Martins

Published online: 23 May 2018

DOI: https://doi.org/10.1051/mfreview/2018007

• Full HTML
• PDF (9.033 MB)
• ePUB (8.414 MB)
• References

Open Access

Review

Modelling of additive manufacturing processes: a review and classification 2

Panagiotis Stavropoulos and Panagis Foteinopoulos

Published online: 16 March 2018

DOI: https://doi.org/10.1051/mfreview/2017014

• Full HTML
• PDF (5.294 MB)
• ePUB (5.176 MB)
• References

Open Access

Springback optimization in automotive Shock Absorber Cup with Genetic Algorithm 1

Ganesh Kakandikar and Vilas Nandedkar

Published online: 13 February 2018

DOI: https://doi.org/10.1051/mfreview/2017013

• Full HTML
• PDF (3.073 MB)
• ePUB (3.270 MB)
• References