Free Access to the whole issue

Manufacturing Review

Volume 6 (2019)

Export the citation of the selected articles Export
Select all

Special Issue – Advanced Joining Processes

Open Access

Research on microstructure and mechanical properties of explosively welded stainless steel/commercially pure Ti plate 28

Marcin Małek, Marcin Wachowski and Robert Kosturek

Published online: 20 December 2019

DOI: https://doi.org/10.1051/mfreview/2019028

Special Issue - Advances in Research in New Forming Technology - from the ICNFT2018

Open Access

Impact of geometrical parameters of micro-textured DLC on tribological properties under dry sliding friction 18

Tetsuhide Shimizu, Hironori Kan, Hamza Messaoudi, Frank Vollertsen and Ming Yang

Published online: 12 June 2019

DOI: https://doi.org/10.1051/mfreview/2019018

Open Access

Heating schemes and process parameters of induction heating of aluminium sheets for hot stamping 17

Yankang Tian, Libo Wang, Gerald Anyasodor, Zhenhai Xu and Yi Qin

Published online: 10 June 2019

DOI: https://doi.org/10.1051/mfreview/2019013

Open Access

Investigation of diffusion behavior of carburized sheet metal in hot stamping 16

Alexander Horn and Marion Merklein

Published online: 07 June 2019

DOI: https://doi.org/10.1051/mfreview/2019017

Open Access

Eccentric rotary swaging variants 15

Svetlana Ortmann Ishkina, Anastasiya Toenjes, Christian Schenck, Axel von Hehl, Hans-Werner Zoch and Bernd Kuhfuss

Published online: 06 June 2019

DOI: https://doi.org/10.1051/mfreview/2019010

Open Access

Study of the mechanical properties of sheet metals drawn through drawbeads 14

Harald Schmid and Marion Merklein

Published online: 04 June 2019

DOI: https://doi.org/10.1051/mfreview/2019014

Open Access

Removal behavior and output quality for laser chemical machining of tool steels 13

Hamza Messaoudi, Merlin Mikulewitsch, Daniel Brand, Axel von Freyberg and Andreas Fischer

Published online: 04 June 2019

DOI: https://doi.org/10.1051/mfreview/2019015

Open Access

Lubricant-free deep drawing using CO₂ and N₂ as volatile media injected through laser-drilled microholes 11

Ehsan Zahedi, Christoph Woerz, Gerd Reichardt, Georg Umlauf, Mathias Liewald, Jakob Barz, Rudolf Weber, Daniel J. Foerster and Thomas Graf

Published online: 24 May 2019

DOI: https://doi.org/10.1051/mfreview/2019011

Open Access

Investigation on blasted tool surfaces as a measure for material flow control in sheet-bulk metal forming 10

Marion Merklein, Maria Löffler, Daniel Gröbel and Johannes Henneberg

Published online: 21 May 2019

DOI: https://doi.org/10.1051/mfreview/2019012

Open Access

The influence of process parameters and sheet material on the temperature development in the forming zone 9

Philipp Tröber, Markus Welm, Hannes Alois Weiss, Peter Demmel, Roland Golle and Wolfram Volk

Published online: 17 May 2019

DOI: https://doi.org/10.1051/mfreview/2019005

Open Access

Effect of initial tempers on mechanical properties of creep-aged AA2050 8

Yong Li, Yo-Lun Yang, Qi Rong, Zhusheng Shi, Jianguo Lin and Rajab Said

Published online: 13 May 2019

DOI: https://doi.org/10.1051/mfreview/2019008

Open Access

Experimental and numerical analysis of incremental magnetic pulse welding of dissimilar sheet metals 7

Verena Psyk, Maik Linnemann and Christian Scheffler

Published online: 01 May 2019

DOI: https://doi.org/10.1051/mfreview/2019007

Special Issue - The emerging materials and processing technologies

Open Access

Review

Powder-bed additive manufacturing for aerospace application: Techniques, metallic and metal/ceramic composite materials and trends 5

Alexander Katz-Demyanetz, Vladimir V. Popov Jr., Aleksey Kovalevsky, Daniel Safranchik and Andrey Koptyug

Published online: 22 March 2019

DOI: https://doi.org/10.1051/mfreview/2019003

Open Access

Effect of crystallographic texture on the forming limit in microforming of brass 27

Anil Mashalkar and Vilas Nandedkar

Published online: 27 November 2019

DOI: https://doi.org/10.1051/mfreview/2019024

Open Access

Self-repairing mechanism and surface characterization of compressor vanes lubricated with oil added with magnesium silicate hydroxide nanorods 26

Libo Wang, Yi Yang, Yi Qin, Gang Yang, Yuan Qin and Mingxia Wu

Published online: 25 November 2019

DOI: https://doi.org/10.1051/mfreview/2019025

Open Access

Review

A comparative review on cold gas dynamic spraying processes and technologies 25

Sunday Temitope Oyinbo and Tien-Chien Jen

Published online: 07 November 2019

DOI: https://doi.org/10.1051/mfreview/2019023

Open Access

Manufacture of silicon carbide reinforced aluminium 6061 metal matrix composites for enhanced sliding wear properties 24

Avinash Bhat and Ganesh Kakandikar

Published online: 24 October 2019

DOI: https://doi.org/10.1051/mfreview/2019021

Open Access

Review

Study on influential parameters of hybrid AFM processes: a review 23

Chinu Kumari and Sanjay Kumar Chak

Published online: 24 October 2019

DOI: https://doi.org/10.1051/mfreview/2019022

Open Access

Micro-grinding temperature prediction considering the effects of crystallographic orientation 22

Man Zhao, Xia Ji and Steven Y. Liang

Published online: 23 September 2019

DOI: https://doi.org/10.1051/mfreview/2019009

Open Access

Investigation on the effect of mechanical vibration in mild steel weld pool 21

Pravin Kumar Singh

Published online: 09 September 2019

DOI: https://doi.org/10.1051/mfreview/2019020

Open Access

Rolling paths design assisted by target-temperature driven intelligent FE simulation of radial-axial ring rolling 20

Xuechao Li, Lianggang Guo, Yifan Wang and Lei Liang

Published online: 12 July 2019

DOI: https://doi.org/10.1051/mfreview/2019019

Open Access

Review

Materials, properties, manufacturing methods and cutting performance of innovative ceramic cutting tools − a review 19

Sergey N. Grigoriev, Sergey V. Fedorov and Khaled Hamdy

Published online: 14 June 2019

DOI: https://doi.org/10.1051/mfreview/2019016

Open Access

Review

Reducing adhesive wear in dry deep drawing of high-alloy steels by using MMC tool 12

Hannes Freiße, Adrian Ditsche and Thomas Seefeld

Published online: 28 May 2019

DOI: https://doi.org/10.1051/mfreview/2019004

Open Access

Fabrication of various micropatterns by maskless micro-electrochemical texturing 6

Sandip Kunar and Bijoy Bhattacharyya

Published online: 30 April 2019

DOI: https://doi.org/10.1051/mfreview/2019006

Open Access

An overview on economic machining of hardened steels by hard turning and its process variables 4

Abhishek Anand, Ajay Kumar Behera and Sudhansu Ranjan Das

Published online: 15 March 2019

DOI: https://doi.org/10.1051/mfreview/2019002

Open Access

Inspection of the residual stress on welds using laser ultrasonic supported with finite element analysis 3

Chong Ye, I. Charles Ume, Yuanlai Zhou and Vishnu V.B. Reddy

Published online: 22 February 2019

DOI: https://doi.org/10.1051/mfreview/2019001

Open Access

Review

A review on optimization of machining performances and recent developments in electro discharge machining 2

Binayaka Nahak and Ankur Gupta

Published online: 15 February 2019

DOI: https://doi.org/10.1051/mfreview/2018015

Open Access

Self-repairing and tribological behaviour of steel–steel friction pairs lubricated with an oil with magnesium silicate hydrosilicate as additive 1

Libo Wang, Yi Yang, Gang Yang, Guohong Shui and Mingxia Wu

Published online: 16 January 2019

DOI: https://doi.org/10.1051/mfreview/2018016

Manufacturing Review

Volume 6 (2019)

Special Issue – Advanced Joining Processes

Research on microstructure and mechanical properties of explosively welded stainless steel/commercially pure Ti plate 28

Special Issue - Advances in Research in New Forming Technology - from the ICNFT2018

Impact of geometrical parameters of micro-textured DLC on tribological properties under dry sliding friction 18

Heating schemes and process parameters of induction heating of aluminium sheets for hot stamping 17

Investigation of diffusion behavior of carburized sheet metal in hot stamping 16

Eccentric rotary swaging variants 15

Study of the mechanical properties of sheet metals drawn through drawbeads 14

Removal behavior and output quality for laser chemical machining of tool steels 13

Lubricant-free deep drawing using CO2 and N2 as volatile media injected through laser-drilled microholes 11

Investigation on blasted tool surfaces as a measure for material flow control in sheet-bulk metal forming 10

The influence of process parameters and sheet material on the temperature development in the forming zone 9

Effect of initial tempers on mechanical properties of creep-aged AA2050 8

Experimental and numerical analysis of incremental magnetic pulse welding of dissimilar sheet metals 7

Special Issue - The emerging materials and processing technologies

Powder-bed additive manufacturing for aerospace application: Techniques, metallic and metal/ceramic composite materials and trends 5

Effect of crystallographic texture on the forming limit in microforming of brass 27

Self-repairing mechanism and surface characterization of compressor vanes lubricated with oil added with magnesium silicate hydroxide nanorods 26

A comparative review on cold gas dynamic spraying processes and technologies 25

Manufacture of silicon carbide reinforced aluminium 6061 metal matrix composites for enhanced sliding wear properties 24

Study on influential parameters of hybrid AFM processes: a review 23

Micro-grinding temperature prediction considering the effects of crystallographic orientation 22

Investigation on the effect of mechanical vibration in mild steel weld pool 21

Rolling paths design assisted by target-temperature driven intelligent FE simulation of radial-axial ring rolling 20

Materials, properties, manufacturing methods and cutting performance of innovative ceramic cutting tools − a review 19

Reducing adhesive wear in dry deep drawing of high-alloy steels by using MMC tool 12

Fabrication of various micropatterns by maskless micro-electrochemical texturing 6

An overview on economic machining of hardened steels by hard turning and its process variables 4

Inspection of the residual stress on welds using laser ultrasonic supported with finite element analysis 3

A review on optimization of machining performances and recent developments in electro discharge machining 2

Self-repairing and tribological behaviour of steel–steel friction pairs lubricated with an oil with magnesium silicate hydrosilicate as additive 1

Lubricant-free deep drawing using CO₂ and N₂ as volatile media injected through laser-drilled microholes 11