Manufacturing Rev.
Volume 6, 2019
Special Issue - Advances in Research in New Forming Technology - from the ICNFT2018
Article Number 17
Number of page(s) 11
Published online 10 June 2019
  1. E. Kilinç, D. Kaya, F.Ç. Kiliç, M. Eyidoğan, M. Özkaymak, O. Taylan, W. Pedrycz, An energy efficiency analysis of an industrial reheating furnace and an implementation of efficiency enhancements methods, Energy Explor. Exploit. 32 (2015) 989–1003 [CrossRef] [Google Scholar]
  2. W. Liang, Y. Liu, B. Zhu, M. Zhou, Y. Zhang, Conduction heating of boron alloyed steel in application for hot stamping, Int. J. Precis. Eng. Manuf. 16 (2015) 1983–1992 [CrossRef] [Google Scholar]
  3. W.K. Liang, L. Wang, Y. Liu, Y.L. Wang, Y.S. Zhang, Blank shape sensitivity on temperature distribution of hot stamping boron steel through conduction heating, Adv. Mater. Res. 1063 (2014) 211–214 [CrossRef] [Google Scholar]
  4. K. Mori, S. Maki, Y. Tanaka, Warm and hot stamping of ultra high tensile strength steel sheets using resistance heating, CIRP Ann. - Manuf. Technol. 54 (2005) 209–212 [CrossRef] [Google Scholar]
  5. L. Jakubovičová, G. Andrej, K. Peter, S. Milan, Optimization of the induction heating process in order to achieve uniform surface temperature, Procedia Eng. 136 (2016) 125–131 [CrossRef] [Google Scholar]
  6. S. Klonk, PhD thesis, Ecole Nationale Supérieure des Mines de Paris, 2013 [Google Scholar]
  7. M.W. Kennedy, S. Akhtar, J.A. Bakken, R.E. Aune, in: S.N. Monteiro, D.E. Verhulst, P.N. Anyalebechi, J.A. Pomykala (Eds.), Proceedings of the EPD Congress 2011, San Diego, 2011, pp. 707–722 [Google Scholar]
  8. B.J. Yang, A. Hattiangadi, W.Z. Li, G.F. Zhou, T.E. McGreevy, Simulation of steel microstructure evolution during induction heating, Mater. Sci. Eng. A 527 (2010) 2978–2984 [CrossRef] [Google Scholar]
  9. A. Bermúdez, D. Gómez, M.C. Muñiz, P. Salgado, Transient numerical simulation of a thermoelectrical problem in cylindrical induction heating furnaces, Adv. Comput. Math. 26 (2007) 39–62 [CrossRef] [Google Scholar]
  10. D. Istardi, A. Triwinarko, Induction heating process design using COMSOL® multiphysics software, TELKOMNIKA (Telecommunication Comput. Electron. Control) 9 (2015) 327 [CrossRef] [Google Scholar]
  11. H.K. Jung, C.G. Kang, Induction heating process of an Al-Si aluminum alloy for semi-solid die casting and its resulting microstructure, J. Mater. Process. Technol. 120 (2002) 355–364 [CrossRef] [Google Scholar]
  12. N. Kesangam, S. Pinitsoontorn, S. Srimanosaowapak, Science Direct Effect of initial microstructure on induction heating of A319 aluminium alloy, Mater. Today Proc. 5 (2018) 9615–9623 [CrossRef] [Google Scholar]
  13. F. Shang, E. Sekiya, Y. Nakayama, Application of high-frequency induction heating apparatus to heat treatment of 6061 aluminum alloy, Mater. Trans. 52 (2011) 2052–2060 [CrossRef] [Google Scholar]
  14. N. Barman, J. Mukherjee, P. Dutta, Numerical simulation of induction heating of aluminum alloy billets, Solid State Phenom. 141–143 (2009) 133–138 [Google Scholar]
  15. R. Goldstein, Design and fabrication of inductors for heat treating, brazing, and soldering, Induction Heat. Heat Treat. 4 (2018) 619–632 [Google Scholar]
  16. M.H. Tavakoli, H. Karbaschi, F. Samavat, Computational Modeling of Induction Heating Process, Prog. Electromagn. Res. Lett. 11 (2009) 93–102 [CrossRef] [Google Scholar]
  17. M.W. Kennedy, Licentiate thesis, Royal Institute of Technology, Stockholm, 2013 [Google Scholar]
  18. L. Larsson, Licentiate thesis, Lund University, Lund, 2005 [Google Scholar]
  19. I. Doležel, P. Kropík, B. Ulrych, Induction heating of thin metal plates in time-varying external magnetic field solved as nonlinear hard-coupled problem, Appl. Math. Comput. 219 (2013) 7159–7169 [Google Scholar]
  20. J. Sun, S. Li, C. Qiu, Y. Peng, Numerical and experimental investigation of induction heating process of heavy cylinder, Appl. Therm. Eng. 134 (2018) 341–352 [CrossRef] [Google Scholar]
  21. X. Fu, B. Wang, X. Tang, H. Ji, X. Zhu, Study on induction heating of workpiece before gear rolling process with different coil structures, Appl. Therm. Eng. 114 (2017) 1–9 [CrossRef] [Google Scholar]
  22. M. Kranjc, A. Zupanic, D. Miklavcic, T. Jarm, Numerical analysis and thermographic investigation of induction heating, Int. J. Heat Mass Transf. 53 (2010) 3585–3591 [CrossRef] [Google Scholar]
  23. S. Zinn, S.L. Semiatin, E.P.R. Institute, and B.M.I.C. Laboratories, Elements of induction heating: Design, control, and applications, ASM International, 1988 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.