EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Volume 6 (2019) Manufacturing Rev., 6 (2019) 11 References
Issue
Manufacturing Rev.
Volume 6, 2019
Special Issue - Advances in Research in New Forming Technology - from the ICNFT2018
Article Number 11
Number of page(s) 11
DOI https://doi.org/10.1051/mfreview/2019011
Published online 24 May 2019
  1. F. Vollertsen, F. Schmidt, Dry metal forming: definition, chances and challenges, IJPEM-GT 1 (2014) 59–62 [Google Scholar]
  2. P. Kapler, Partikelbildung und −morphologie bei der Hochdruckmikronisierung gashaltiger Lösungen, Dissertation, Ruhr-Universität Bochum, 2002 [Google Scholar]
  3. Fachlabor UTRM SoSe 2010, Hochdruckextraktion mit CO2 [Google Scholar]
  4. P.W. Atkins, J. de Paula, Physical Chemistry, Oxford University Press, Oxford, 2014, 10th Revised Edition [Google Scholar]
  5. ChemicaLogic Corporation, http://www.chemicalogic.com/Pages/DownloadPhaseDiagrams.html, 2018 [Google Scholar]
  6. R. Weber, T. Graf, P. Berger, V. Onuseit, C. Freitag, M. Wiedenmann, A. Feuer, Heat accumulation during pulsed laser materials processing, Opt. Exp. 22 (2014) 11312–11324, and Erratum thereto in Opt. Exp. 22 (2014) 28232 [CrossRef] [Google Scholar]
  7. D.J. Förster, R. Weber, T. Graf, Residual heat during ultrashort laser drilling of metals, in Proceedings of LPM 2017 − the 18th International Symposium on Laser Precision Microfabrication, Kitakyushu , 2017 [Google Scholar]
  8. J.P. Negel, A. Voss, M. Abdou Ahmed, D. Bauer, D. Sutter, A. Killi, T. Graf, 1.1 kW average output power from a thin-disk multipass amplifier for ultrashort laser pulses, Opt. Lett. 38 (2013) 5442–5445 [CrossRef] [PubMed] [Google Scholar]
  9. D.J. Förster, R. Weber, D. Holder, T. Graf, Estimation of the depth limit for percussion drilling with picosecond laser pulses, Opt. Exp. 26 (2018) 11546–11552 [CrossRef] [Google Scholar]
  10. G. Umlauf, E. Zahedi, C. Woerz, J. Barz, M. Liewald, T. Graf, G.E.M. Tovar, Grundlagen-untersuchungen zur Herstellung von Lasermikro-bohrungen in Stahl und dem Ausströmverhalten von CO2 als Trockenschmiermedium, Dry Met. Forming OAJ FMT 2 (2016) 18–24 [Google Scholar]
  11. C. Woerz, E. Zahedi, G. Umlauf, M. Liewald, R. Weber, T. Graf, G.E.M. Tovar, Tiefziehen eines U-Profils mit flüchtigen Medien als Schmierstoffer- satz, Dry Met. Forming OAJ FMT 3 (2017) 50–61 [Google Scholar]
  12. C. Woerz, M. Liewald, M. Singer, Investigation of tribological conditions in the strip drawing test using liquid CO2 and N2 as a volatile lubricant, in Proc. of 7th ICTMP , 2016, pp. 140–148 [Google Scholar]
  13. C. Woerz, G. Reichardt, M. Liewald, E. Zahedi, R. Weber, T. Graf, Dry deep drawing of a rectangular cup assisted by volatile media injected from laser-drilled microholes, Dry Met. Forming OAJ FMT 4 (2018) 1–8 [Google Scholar]
  14. G. Reichardt, M. Liewald, Friction conditions on deep drawing tool radii when using volatile media as lubrication substitute, in TMS 2019 – Supplemental proceedings , 2019 [Google Scholar]
  15. G. Reichardt, M. Liewald, Investigation on friction behaviour of deep drawing radii using volatile media as lubricant substitutes, in Proceedings of the 18th Conference on Sheet Metal, SHEMET 2019, Procedia Manufacturing, Leuven, Belgium , 2019, pp. 193–200 [Google Scholar]
  16. A. Papaioanu, Einsatz eines neuartigen Verfahrens zum kombinierten Recken und Tiefziehen von Außenhauptbeplankungen aus Feinblech, Beiträge zur Umformtechnik 81, Dissertation, University of Stuttgart, Institute for Metal Forming Technology, 2016 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.