Open Access
Review
Issue
Manufacturing Rev.
Volume 6, 2019
Article Number 23
Number of page(s) 16
DOI https://doi.org/10.1051/mfreview/2019022
Published online 24 October 2019
  1. H. Foellinger, Optimum parameters for dressing process of conventional grinding, Proc. Super Abras. 85 (1985) 8.22–8.37 [Google Scholar]
  2. A.J. Troglio, Performance evaluation of multi-stone honing tool by experimental design methods, Proc. Int. Honing Conf. M R03–232 (2003) 1–24 [Google Scholar]
  3. C.J. Evans, E. Paul, D. Dornfeld, Material removal mechanisms in lapping and polishing, CIRP Ann. 52 (2003) 611–633 [CrossRef] [Google Scholar]
  4. I. Lazoglu, C. Manav, Y. Murtezaoglu, Tool path optimization for free form surface machining, CIRP Ann. 58 (2009) 101–104 [CrossRef] [Google Scholar]
  5. V.K. Jain, P. Kumar, P.K. Behera, S.C. Jayswal, Effect of working gap and circumferential speed on the performance of magnetic abrasive finishing process, Wear 250 (2001) 384–390 [CrossRef] [Google Scholar]
  6. A. Lasemi, D. Xue, P. Gu, Recent development in CNC machining of freeform surfaces. A state-of-the-art review, Comput. Aided Des. 42 (2010) 641–654 [CrossRef] [Google Scholar]
  7. A. Sidpara, V.K. Jain, Experimental investigations into surface roughness and yield stress in magnetorheological fluid based nano-finishing process, Int. J. Precis. Eng. Manuf. 13 (2012) 1–6 [CrossRef] [Google Scholar]
  8. A. Sidpara, V.K. Jain, Effect of fluid composition on nano-finishing of single crystal silicon by magnetic field assisted finishing process, Int. J. Adv. Manuf. Technol. 55 (2010) 243–252 [CrossRef] [Google Scholar]
  9. A. Sidpara, V.K. Jain, Nano finishing of freeform surfaces of prosthetic knee joint implant, Proc. IMech E 226 (2012) 1833–1846 [CrossRef] [Google Scholar]
  10. C. Kumari, S.K. Chak, A review on magnetically assisted abrasive finishing and their critical process parameters, Manufactur. Rev. 5 (2018) 13 [CrossRef] [Google Scholar]
  11. M. Tricard, W.I. Kordonski, A.B. Shorey, Magnetorheological jet finishing of conformal, freeform and steep concave optics, CIRP Ann. 55 (2006) 309–312 [CrossRef] [Google Scholar]
  12. R.K. Jain, V.K. Jain, Specific energy and temperature determination in abrasive flow machining process, Int. J. Mach. Tools Manuf. 41 (2001) 1689–1704 [CrossRef] [Google Scholar]
  13. S. Rajesha, Some studies to enhance the capabilities of abrasive flow machining process, PhD dissertation, IIT Roorkee, 2011 [Google Scholar]
  14. P. Balasubramanian, T. Senthilvelan, Optimization of machining parameters in EDM process using cast and sintered copper electrodes, Proc. Mater Sci. 6 (2014) 1292–1302 [CrossRef] [Google Scholar]
  15. L. Nagdeve, V.K. Jain, J. Ramkumar, Experimental Investigations into nano-finishing of freeform surfaces using negative replica of the knee joint, Proc. CIRP 42 (2016) 793–798 [CrossRef] [Google Scholar]
  16. T.R. Loveless, R.E. Willams, K.P. Rajurkar, A study of the effects of abrasive flow finishing on various machined surfaces, J. Mater. Process Technol. 47 (1994) 133–151 [CrossRef] [Google Scholar]
  17. J.C. Lambropoulos, T. Fang, P.D. Funkenbusch, S.D. Jacobs, M.J. Cumbo, D. Golini, Surface microroughness of optical glasses under deterministic microgrinding, Appl. Opt. 35 (1996) 4448–4462 [CrossRef] [PubMed] [Google Scholar]
  18. H.S. Shan, A.K. Dubey, Micro machining by flow of abrasives, in Proc of 17th All India Manufacturing Technology design and Research Conference, Warangal, India, 1997, pp. 269–275, Allied publishers limited, Mumbai [Google Scholar]
  19. S. Kumar, V.K. Jain, A. Sidpara, Nanofinishing of freeform surfaces (knee joint implant) by rotational-magnetorheological abrasive flow finishing (R-MRAFF) process, Precis. Eng. 42 (2015) 165–178 [CrossRef] [Google Scholar]
  20. R.E. Williams, K.P. Rajurkar, Metal removal and surface finish characteristics in abrasive flow machining, Mechanics of deburring and surface finishing processes. Am. Soc. Mech. Eng. 38 (1989) 93–106 [Google Scholar]
  21. R.E. Williams, K.P. Rajurkar, L.J. Rhoades, Performance characteristics of abrasive flow machining, Technical Paper of the Society of Manufacturing Engineers (SME) 1989, M R89–806 [Google Scholar]
  22. A. Sadiq, M.S. Shunmugam, Investigation into magnetorheological abrasive honing (MRAH), Int. J. Mach. Tools Manuf. 49 (2009) 554–560 [CrossRef] [Google Scholar]
  23. B.H. Yan, H.J. Tzeng, F.Y. Huang et al., Finishing effects of spiral polishing method on micro lapping surface, Int. J. Mach. Tools Manuf. 47 (2007) 920–926 [CrossRef] [Google Scholar]
  24. A.C. Wang, L. Tsai, K.Z. Liang et al., Uniform surface polished method of complex holes in abrasive flow machining, Trans. Nonferrous Met. Soc. China 19 (2009) 250–257 [CrossRef] [Google Scholar]
  25. K.M. Reddy, A.K. Sharma, P. Kumar, Some aspects of centrifugal force assisted abrasive flow machining of 2014 Al alloy, Proc. IMechE B 222 (2008) 773–783 [CrossRef] [Google Scholar]
  26. L.J. Rhoades, T.A. Kohut, N.P. Nokovich, D.M. Yanda, Unidirectional abrasive flow machining, US patent 5,367,833, 1994 [Google Scholar]
  27. L.J. Rhoades, T.A. Kohut, Reversible Unidirectional abrasive flow machining. US 5070 652, 1991 [Google Scholar]
  28. L.J. Rhoades, Orbital and/or reciprocal machining with a viscous plastic medium. US, WO 90/0504 4, 1990 [Google Scholar]
  29. W.B. Perry, Abrasive flow machining-principles and practices. Proc. Non-tradit. Mach. Conf. (1989) s121–s127 [Google Scholar]
  30. B.S. Brar, R.S. Walia, V.P. Singh, M. Sharma, A robust helical abrasive flow machining (HLX-AFM) process, J. Inst. Eng. Ser. C 94 (2013) 21–29 [CrossRef] [Google Scholar]
  31. T.A. El-Taweel, Modelling and analysis of hybrid electrochemical turning magnetic abrasive finishing of 6061 Al/Al2O3 composite, Int. J. Adv. Manuf. Technol. 37 (2008) 705–714 [CrossRef] [Google Scholar]
  32. A. Mishra, P.M. Pandey, U.S. Dixit, Modeling of material removal in ultrasonic assisted magnetic abrasive finishing process, Int. J. Mech. Sci. 131–132 (2017) 853–867 [CrossRef] [Google Scholar]
  33. J.K. Sambharia, H.S. Mali, Characterization and performance evaluation of developed alternative polymer abrasive gels for abrasive flow finishing process, Int. J. Precis. Technol. 5 (2015) 185–200 [CrossRef] [Google Scholar]
  34. J.R. Gilmore, L.J. Rhoades, Abrasive polishing method, apparatus and composition, US Patent 6,273,787, 2001 [Google Scholar]
  35. S. Singh, H.S. Shan, P. Kumar, Morphology and integrity of surfaces finished by centrifugal force assisted abrasive flow machining, Int. J. Adv. Manuf. Technol. 39 (2008) 1171–1179 [CrossRef] [Google Scholar]
  36. J. Kozak, K.E. Oczos, Selected problems of abrasive hybrid machining, J. Mater. Process Technol. 109 (2001) 360–366 [CrossRef] [Google Scholar]
  37. M.S. Cheema, G. Venkatesh, A. Dvivedi et al., Developments in abrasive flow machining: a review on experimental investigations using abrasive flow machining variants and media, Proc. IMechE B 226 (2012) 1951–1962 [CrossRef] [Google Scholar]
  38. A.R. Jones, J.B. Hull, Ultrasonic flow polishing, Ultrasonics 36 (1998) 97–101 [CrossRef] [Google Scholar]
  39. R.S. Mulik, P.M. Pandey, Experimental Investigations and optimization of ultrasonic assisted magnetic abrasive finishing process, Proc. IMechE B 225 (2011) 1347–1362 [CrossRef] [Google Scholar]
  40. L. Nagdeve, V.K. Jain, J. Ramkumar, Nanofinishing of freeform/sculptured surfaces: state-of-the-art, Manufactur. Rev. 5 (2018) 6 [CrossRef] [Google Scholar]
  41. S. Singh, H.S. Shan, Development of magneto abrasive flow machining process, Int. J. Mach. Tools Manuf. 42 (2002) 953–959 [CrossRef] [Google Scholar]
  42. H.J. Tzeng, B.H. Yan, R.T. Hsu et al., Self-modulating abrasive medium and its application to abrasive flow machining for finishing micro channel surfaces, Int. J. Adv. Manuf. Technol. 32 (2007) 1163–1169 [CrossRef] [Google Scholar]
  43. W.B. Kim, S.J. Lee, Y.L. Kim et al., The electromechanical principle of electrorheological fluid-assisted polishing, Int. J. Mach. Tools Manuf. 43 (2003) 81–88 [CrossRef] [Google Scholar]
  44. K.I. Jang, J. Seok, B.K. Min et al., An electro-chemo-mechanical polishing process using magnetorheological fluid, Int. J. Mach. Tools Manuf. 50 (2010) 869–881 [CrossRef] [Google Scholar]
  45. A. Sidpara, V.K. Jain, Experimental investigations into forces during magnetorheological fluid based finishing process, Int. J. Mach. Tools Manuf. 51 (2011) 358–362 [CrossRef] [Google Scholar]
  46. K.I. Jang, D.Y. Kim, S. Maeng et al., Deburring micro-parts using a magnetorheological fluid, Int. J. Mach. Tools Manuf. 53 (2012) 170–175 [CrossRef] [Google Scholar]
  47. S. Jha, V.K. Jain, Design and development of the magnetorheological abrasive flow finishing (MRAFF) process, Int. J. Mach. Tools Manuf. 44 (2004) 1019–1029 [CrossRef] [Google Scholar]
  48. S. Jha, V.K. Jain, R. Komanduri, Effect of extrusion pressure and number of finishing cycles on surface roughness in magnetorheological abrasive flow finishing (MRAFF) process, Int. J. Adv. Manuf. Technol. 33 (2007) 725–729 [CrossRef] [Google Scholar]
  49. V. Gudipadu, P. Kumar, A.K. Sharma, On ultrasonic assisted abrasive flow finishing of bevel gears, Int. J. Hull. 36 (2015) 97–101 [Google Scholar]
  50. M. Das, V.K. Jain, P.S. Ghoshdastidar, Analysis of magnetorheological abrasive flow finishing (MRAFF) process, Int. J. Adv. Manuf. Technol. 38 (2008) 613–621 [CrossRef] [Google Scholar]
  51. M.R. Sankar, J. Ramkumar, V.K. Jain, Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow finishing (AFF) process, Wear 266 (2009) 688–698 [CrossRef] [Google Scholar]
  52. M.R. Sankar, J. Ramkumar, V.K. Jain, Rotational abrasive flow finishing (R-AFF) process and its effects on finished surface topography, Int. J. Mach. Tools Manuf. 50 (2010) 637–650 [CrossRef] [Google Scholar]
  53. L.J. Rhoades, Abrasive flow machining: a case study, J. Mater. Process. Technol. 28 (1991) 107–116 [CrossRef] [Google Scholar]
  54. K. Przyklenk, Abrasive flow machining: a process for surface finishing and deburring of workpiece with a complicated shape by means of an abrasive laden medium, Adv. Nontradit. Mach. PED ASME 22 (1986) 101–110 [Google Scholar]
  55. R.S. Walia, H.S. Shan, P. Kumar, Determining dynamically active abrasive particles in the media used in centrifugal force assisted abrasive flow machining process, Int. J. Adv. Manuf. Technol. 38 (2008) 1157–1164 [CrossRef] [Google Scholar]
  56. A. Ghosh, A.K. Malik, Manufacturing Science, 3rd edn. EWP, New Delhi (2003), pp. 329–421 [Google Scholar]
  57. P. Ranjan, R. Balasubramaniam, V.K. Suri, Development of chemo-mechanical magnetorheological finishing process for super finishing of copper alloy, Int. J. Manuf. Technol. Manag. 27 (2013) 130–141 [CrossRef] [Google Scholar]
  58. V.K. Jain, A. Sidpara, R. Balasubramaniam et al., Micromanufacturing: a review. Part 1. Proc. IMechE B 228 (2014) 973–994 [CrossRef] [Google Scholar]
  59. B.S. Brar, R.S. Walia, V.P. Singh et al., Effects of helical rod profiles in Helical Abrasive Flow Machining (HLX-AFM) process, International Mechanical Engineering Congress and Exposition, Houston, 2015 [Google Scholar]
  60. V.K. Jain, S.G. Adsul, Experimental investigations into abrasive flow machining, Int. J. Mach. Tool Manuf. 40 (2002) 1003–1021 [CrossRef] [Google Scholar]
  61. L. Fang, J. Zhao, K. Sun, D. Zheng, D. Ma, Temperature as sensitive monitor for efficiency of work in abrasive flow machining, Wear 266 (2009) 678–687 [CrossRef] [Google Scholar]
  62. P.J. Davies, A.J. Fletcher, The assessment of rheological properties of various polyborosiloxane/grit mixtures as utilized in AFM, Proc. IMechE C 209 (1995) 409–418 [CrossRef] [Google Scholar]
  63. G. Venkatesh, Performance study of a new polymer media for AFM. M. Tech. Dissertation, IIT Roorkee, 2010 [Google Scholar]
  64. V.K. Jain, S.G. Adsul, Experimental investigations into abrasive flow machining, Int. J. Mach. Tools Manuf. 40 (2000) 1003–1021 [CrossRef] [Google Scholar]
  65. V.K. Gorana, V.K. Jain, G.K. Lal, Experimental investigation into cutting forces and active grain density during abrasive flow machining, Int. J. Mach. Tools Manuf. 44 (2004) 201–211 [CrossRef] [Google Scholar]
  66. A.C. Wang, S.H. Weng, Developing the polymer abrasive gels in AFM process, J. Mater. Process Technol. 192–193 (2007) 486–490 [CrossRef] [Google Scholar]
  67. M.R. Sankar, S. Mondal, J. Ramkumar et al., Experimental investigations and modelling of drill bit guided abrasive flow finishing (DBG-AFF) process, Int. J. Adv. Manuf. Technol. 42 (2009) 678–688 [CrossRef] [Google Scholar]
  68. R.S. Walia, H.S. Shan, P. Kumar, Abrasive flow machining with additional centrifugal force applied to the media, Mach. Sci. Technol. 10 (2008) 341–354 [CrossRef] [Google Scholar]
  69. M.R. Sankar, J. Ramkumar, V.K. Jain, Experimental investigations into rotating workpiece abrasive flow finishing, Wear 267 (2009) 43–51 [CrossRef] [Google Scholar]
  70. L. Dabrowski, M. Marciniak, T. Szewczyk, Analysis of abrasive flow machining with an electrochemical process aid, Proc. IMechE B 220 (2006) 397–403 [CrossRef] [Google Scholar]
  71. B.S. Brar, R.S. Walia, V.P. Singh, Regression model for Electro-Chemical Aided Abrasive Flow Machining (ECA2FM) process, in 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12th–14th, 2014, IIT Guwahati, Assam, India [Google Scholar]
  72. G. Venkatesh, A.K. Sharma, P. Kumar, On ultrasonic assisted abrasive flow finishing of bevel gears, Int. J. Mach. Tools Manuf. 89 (2015) 29–38 [CrossRef] [Google Scholar]
  73. S. Singh, H.S. Shan, P. Kumar, Wear behavior of materials in magnetically assisted abrasive flow machining, J. Mater. Process. Technol. 128 (2002) 155–161 [CrossRef] [Google Scholar]
  74. S. Kumar, S.S. Hiremath, Machining of internal features using the developed abrasive flow machine, in Conference on Advances in Production and Industrial Engineering, NIT Trichy, India, 20–21 February 2015, 12, 298–303 [Google Scholar]
  75. R.E. Williams, K.P. Rajurkar, Stochastic modeling and analysis of abrasive flow machining, Trans. ASME, J. Eng. Ind. 114 (1992) 74–81 [Google Scholar]
  76. H.J. Tzeng, B.H. Yan, R.T. Hsu et al., Finishing effect of abrasive flow machining on micro slit fabricated by wire-EDM, Int. J. Adv. Manuf. Technol. 34 (2007) 649–656 [CrossRef] [Google Scholar]
  77. E. Uhlmann, V. Mihotovic, A. Coenen, Modelling the abrasive flow machining process on advanced ceramic materials, J. Mater. Process. Technol. 209 (2009) 6062–6066 [CrossRef] [Google Scholar]
  78. D. Jung, W.L. Wang, A. Knafl et al., Experimental investigation of abrasive flow machining effects on injector nozzle geometries, engine performance, and emissions in a DI diesel engine, Int. J. Automot. Technol. 9 (2008) 9–15 [CrossRef] [Google Scholar]
  79. Y.C. Lin, H.M. Chow, B.H. Yan et al., Effects of finishing in abrasive fluid machining on microholes fabricated by EDM, Int. J. Adv. Manuf. Technol. 33 (2007) 489–497 [CrossRef] [Google Scholar]
  80. K. Saraswathamma, S. Jha, P.V. Rao, Experimental investigation into ball end magnetorheological finishing of silicon, Precis. Eng. 42 (2015) 218–223 [CrossRef] [Google Scholar]
  81. S. Sarah, Y. Lam, A.E. Smith, Cascade-correlation neural network modeling of the abrasive flow machining process, Int. J. Ind. Eng. Theory Appl. Pract. 3 (1998) 898–905 [Google Scholar]
  82. E. Uhlmann, S. Richarz, V. Mihotovic, Substrate pretreatment of cemented carbides using abrasive flow machining and laser beam ablation, Prod. Eng. 3 (2009) 81–86 [CrossRef] [Google Scholar]
  83. R.E. Williams, D.F. Walczyk, H.T. Dang, Using abrasive flow machining to seal and finish conformal channels in laminated tooling, Rapid Prototyping J. 13 (2007) 64–75 [CrossRef] [Google Scholar]
  84. S. Singh, H.S. Shan, P. Kumar, Morphology and integrity of surfaces finished by centrifugal force assisted abrasive flow machining, Int. J. Adv. Manuf. Technol. 39 (2008) 1171–1179 [CrossRef] [Google Scholar]
  85. J. Kenda, F. Pusavec, G. Kermouche et al., Surface integrity in abrasive flow machining of hardened tool steel AISI D2, Proc. Eng. 19 (2011) 172–177 [CrossRef] [Google Scholar]
  86. R.E. Williams, Investigation of the abrasive flow machining process and development of a monitoring strategy using acoustic emission, PhD Thesis, The University of Nebraska − Lincoln, USA, 1993 [Google Scholar]
  87. A.K. Sharma, S. Rajesha, G. Venkatesh et al., A natural polymer abrasive media for the abrasive flow machining and a process for preparation, Patent number 1349/DEL/2011, India, 9 May 2011 [Google Scholar]
  88. H.S. Mali, A. Manna, Current status and application of abrasive flow finishing processes: a review, Proc. IMechE B 223 (2009) 809–820 [CrossRef] [Google Scholar]
  89. K.K. Kar, N.L. Ravikumar, P.B. Tailor et al., Performance evaluation and rheological characterization of newly developed butyl rubber based media for abrasive flow machining process, J. Mater. Process. Technol. 209 (2009) 2212–2221 [CrossRef] [Google Scholar]
  90. M.R. Sankar, V.K. Jain, J. Ramkumar, Y.M. Joshi, Rheological characterization of styrene-butadiene based medium and its finishing performance using rotational abrasive flow finishing process, Int. J. Mach. Tools Manuf. 51 (2011) 947–957 [CrossRef] [Google Scholar]
  91. M. Sarkar, V.K. Jain, Nanofinishing of freeform surfaces using abrasive flow finishing process, Proc. IMechE B 231 (2015) 1501–1515 [CrossRef] [Google Scholar]
  92. A.D. Ghadikolaei, M. Vahdati, Experimental study on the effect of finishing parameters on surface roughness in magneto-rheological abrasive flow finishing process, Proc. IMech E, Part B 229 (2014) 1517–1524 [CrossRef] [Google Scholar]
  93. K. Saito, Finishing and polishing of free-form surfaces, Bull. Jpn. Soc. Mech. Engg. 18 (1984) 104–109 [Google Scholar]
  94. M.R. Sankar, V.K. Jain, J. Ramkumar, Abrasive flow machining (AFM): An Overview. https://www.researchgate.net/publication/228747468_Abrasive_flow_machining_AFM_An_Overview (2011, accessed 15 January 2018) [Google Scholar]
  95. J. Sambharia, H.S. Mali, Recent developments in abrasive flow finishing process: A review of current research and future prospects, Proc. IMechE B 233 (2017) 1–12 [Google Scholar]
  96. H.S. Mali, A. Manna, Optimum selection of abrasive flow machining conditions during fine finishing of Al/15 wt% SiC-MMC using Taguchi method, Int. J. Adv. Manuf. Technol. 50 (2010) 1013–1024 [CrossRef] [Google Scholar]
  97. V.K. Jain, Magnetic field assisted abrasive based micro/nano-finishing, J. Mater. Proc. Technol. 209 (2009) 6022–6038 [CrossRef] [Google Scholar]
  98. V.K. Jain et al., Nano-finishing techniques: a review, Proc. Inst. Mech. Eng. C 226 (2012) 327–346 [CrossRef] [Google Scholar]
  99. P.K. Basera, V.K. Jain, Nano-finishing of aircraft blade bearing by magnetic abrasive finishing (MAF) process, 2nd Annual International Conference on Material Science, Metals and Manufacturing (M3 2012), 2012, pp. 129–136 [Google Scholar]
  100. T.S. Bedi, A.K. Singh, Magnetorheological methods for nanofinishing a review, Part. Sci. Technol. 34 (2016) 412–422 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.