Open Access
Review
Issue
Manufacturing Rev.
Volume 5, 2018
Article Number 2
Number of page(s) 26
DOI https://doi.org/10.1051/mfreview/2017014
Published online 16 March 2018
  1. ASTM Standard, Standard terminology for additive manufacturing technologies, vol. 10. 04 [Google Scholar]
  2. H.A. Hegab, Manuf. Rev. 3 (2016) 11 [Google Scholar]
  3. P. Bartolo, J.P. Kruth, J. Silva, G. Levy, A. Malshe, K. Rajurkar, M. Leu, CIRP Ann.-Manuf. Technol. 61 (2012) 635–655 [CrossRef] [Google Scholar]
  4. G.N. Levy, R. Schindel, J.P. Kruth, CIRP Ann.-Manuf. Technol. 52 (2003) 589–609 [CrossRef] [Google Scholar]
  5. N. Hopkinson, R. Hague, P. Dickens, Rapid manufacturing: an industrial revolution for the digital age, John Wiley and Sons, New Jersey, 2006 [Google Scholar]
  6. T. Caffrey, T.T. Wohlers, Wohlers Report 2015, Wohlers Associates, 2015 [Google Scholar]
  7. H. Bikas, P. Stavropoulos, G. Chryssolouris, Int. J. Adv. Manuf. Technol. 83 (2016) 389–405 [CrossRef] [Google Scholar]
  8. G. Chryssolouris, Manufacturing systems: theory and practice, Springer Science and Business Media, Berlin, 2013 [Google Scholar]
  9. G.N. Levy, Phys. Procedia 5 (2010) 65–80 [CrossRef] [Google Scholar]
  10. M.D. Monzón, Z. Ortega, A. Martínez, F. Ortega, Int. J. Adv. Manuf. Technol. 76 (2015) 1111–1121 [CrossRef] [Google Scholar]
  11. I. Gibson, D. Rosen, B. Stucker, Additive manufacturing technologies: 3D printing, rapid prototyping, and direct digital manufacturing, Springer, Berlin, 2014 [Google Scholar]
  12. R. Hague, P.M. Dickens, in: D. Bourell (Ed.), Proceedings of the Solid Freeform Fabrication Symposium, University of Texas, Austin, 1996, pp. 523–538 [Google Scholar]
  13. R.A. Harris, H.A. Newlyn, R.J. Hague, P.M. Dickens, Int. J. Mach. Tools Manuf. 43 (2003) 879–887 [CrossRef] [Google Scholar]
  14. K. Xu, T.H. Kwok, Z. Zhao, Y. Chen, J. Comput. Inf. Sci. Eng. 17 (2017) 021012 [CrossRef] [Google Scholar]
  15. G. Chryssolouris, J. Kotselis, P. Koutzampoikidis, S. Zannis, D. Mourtzis, in: Proceeding of The 32nd CIRP International Seminar on Manufacturing Systems, Leuven, 1999, pp. 213–218 [Google Scholar]
  16. Y. Abouliatim, T. Chartier, P. Abelard, C. Chaput, C. Delage, J. Eur. Ceram. Soc. 29 (2009) 919–924 [CrossRef] [Google Scholar]
  17. D. Adalsteinsson, J.A. Sethian, J. Comput. Phys. 120 (1995) 128–144 [CrossRef] [Google Scholar]
  18. D. Adalsteinsson, J.A. Sethian, J. Comput. Phys. 122 (1995) 348–366 [CrossRef] [Google Scholar]
  19. D. Adalsteinsson, J.A. Sethian, J. Comput. Phys. 138 (1997) 193–223 [CrossRef] [Google Scholar]
  20. N. Hopkinson, P. Dickens, Int. J. Prod. Res. 38 (2000) 3747–3757 [CrossRef] [Google Scholar]
  21. F. Liravi, S. Das, C. Zhou, Comput.-Aided Des. 69 (2015) 134–142 [CrossRef] [Google Scholar]
  22. B.S. Raju, U.C. Shekar, K. Venkateswarlu, D.N. Drakashayani, Procedia Technol. 14 (2014) 380–389 [CrossRef] [Google Scholar]
  23. K. Chockalingam, N. Jawahar, U. Chandrasekar, K.N. Ramanathan, J. Mater. Process. Technol. 208 (2008) 348–365 [CrossRef] [Google Scholar]
  24. B.S. Raju, U.C. Sekhar, D.N. Drakshayani, Procedia Mater. Sci. 5 (2014) 2532–2541 [CrossRef] [Google Scholar]
  25. M.M. Emami, F. Barazandeh, F. Yaghmaie, J. Mater. Process. Technol. 219 (2015) 17–27 [CrossRef] [Google Scholar]
  26. J.P. Kruth, P. Mercelis, J. Van Vaerenbergh, L. Froyen, M. Rombouts, Rapid Prototyp. J. 11 (2005) 26–36 [CrossRef] [Google Scholar]
  27. J.P. Kruth, G. Levy, F. Klocke, T.H.C. Childs, CIRP Ann.-Manuf. Technol. 56 (2007) 730–759 [CrossRef] [Google Scholar]
  28. T.H.C. Childs, M. Berzins, G.R. Ryder, A. Tontowi, J. Eng. Manuf. 213 (1999) 333–349 [CrossRef] [Google Scholar]
  29. S.H. Choi, S. Samavedam, Comput. Ind. 47 (2002) 39–53 [CrossRef] [Google Scholar]
  30. F.R. Liu, Q. Zhang, W.P. Zhou, J.J. Zhao, J.M. Chen, J. Mater. Process. Technol. 212 (2012) 2058–2065 [CrossRef] [Google Scholar]
  31. P. Mercelis, J.P. Kruth, Rapid Prototyp. J. 12 (2006) 254–265 [CrossRef] [Google Scholar]
  32. M.P. Mughal, H. Fawad, R. Mufti, Acta Mech. 183 (2006) 61–79 [CrossRef] [Google Scholar]
  33. A. Franco, M. Lanzetta, L. Romoli, J. Clean. Prod. 18 (2010) 1722–1730 [CrossRef] [Google Scholar]
  34. X.C. Wang, T. Laoui, J. Bonse, J.P. Kruth, B. Lauwers, L. Froyen, Int. J. Adv. Manuf. Technol. 19 (2002) 351–357 [CrossRef] [Google Scholar]
  35. N. Raghunath, P.M. Pandey, Int. J. Mach. Tools Manuf. 47 (2007) 985–995 [CrossRef] [Google Scholar]
  36. F.R. Liu, C. He, J.M. Chen, Int. J. Mach. Tools Manuf. 65 (2013) 22–28 [CrossRef] [Google Scholar]
  37. J.D. Williams, C.R. Deckard, Rapid Prototyp. J. 4 (1998) 90–100 [CrossRef] [Google Scholar]
  38. S. Eshraghi, S. Das, Acta Biomater. 8 (2012) 3138–3143 [CrossRef] [Google Scholar]
  39. P. Clementz, J.N. Pernin, Int. J. Eng. Sci. 41 (2003) 2305–2333 [CrossRef] [Google Scholar]
  40. P. Peyre, Y. Rouchausse, D. Defauchy, G. Régnier, J. Mater. Process. Technol. 225 (2015) 326–336 [CrossRef] [Google Scholar]
  41. R. Ganeriwala, T.I. Zohdi, in: D.M.H. Dornfeld (Ed.), Proceedings of the 6th CIRP International Conference on High Performance Cutting, Elsevier, Vol. 14, 2014, pp. 299–304 [Google Scholar]
  42. A. Wegner, G. Witt, Phys. Procedia 39 (2012) 480–490 [CrossRef] [Google Scholar]
  43. Y. Khalil, A. Kowalski, N. Hopkinson, Manuf. Rev. 3 (2016) 15 [Google Scholar]
  44. J. Munguía, J. Ciurana, C. Riba, Proc. Inst. Mech. Eng. B: J. Eng. Manuf. 223 (2009) 995–1003 [CrossRef] [Google Scholar]
  45. M. Ruffo, C. Tuck, R. Hague, Int. J. Prod. Res. 44 (2006) 5131–5146 [CrossRef] [Google Scholar]
  46. J.C. Nelson, S. Xue, J.W. Barlow, J.J. Beaman, H.L. Marcus, D.L. Bourell, Ind. Eng. Chem. Res. 32 (1993) 2305–2317 [CrossRef] [Google Scholar]
  47. R. Paul, S. Anand, J. Manuf. Syst. 31 (2012) 429–437 [CrossRef] [Google Scholar]
  48. I. Kovaleva, O. Kovalev, I. Smurov, Phys. Procedia. 56 (2014) 400–410 [CrossRef] [Google Scholar]
  49. P. Michaleris, Finite Elem. Anal. Des. 86 (2014) 51–60 [CrossRef] [Google Scholar]
  50. I.A. Roberts, C.J. Wang, R. Esterlein, M. Stanford, D.J. Mynors, Int. J. Mach. Tools Manuf. 49 (2009) 916–923 [CrossRef] [Google Scholar]
  51. J. Xing, W. Sun, R.S. Rana, S.M. IEEE, Optik − Int. J. Light Electron Opt. 124 (2013) 301–304 [CrossRef] [Google Scholar]
  52. S. Kolossov, E. Boillat, R. Glardon, P. Fischer, M. Locher, Int. J. Mach. Tools Manuf. 44 (2004) 117–123 [CrossRef] [Google Scholar]
  53. L. Dong, A. Makradi, S. Ahzi, Y. Remond, J. Mater. Process. Technol. 209 (2009) 700–706 [CrossRef] [Google Scholar]
  54. R.B. Patil, V. Yadava, Int. J. Mach. Tools Manuf. 47 (2007) 1069–1080 [CrossRef] [Google Scholar]
  55. G. Strano, L. Hao, R.M. Everson, K.E. Evans, J. Mater. Process. Technol. 213 (2013) 589–597 [CrossRef] [Google Scholar]
  56. C. Qiu, C. Panwisawas, M. Ward, H.C. Basoalto, J.W. Brooks, M.M. Attallah, Acta Mater. 96 (2015) 72–79 [CrossRef] [Google Scholar]
  57. A.V. Gusarov, I. Yadroitsev, P. Bertrand, I. Smurov, Appl. Surf. Sci. 254 (2007) 975–979 [CrossRef] [Google Scholar]
  58. C. Li, Y. Wang, H. Zhan, T. Han, B. Han, W. Zhao, Mater. Des. 31 (2010) 3366–3373 [CrossRef] [Google Scholar]
  59. L.E. Loh, C.K. Chua, W.Y. Yeong, J. Song, M. Mapar, S.L. Sing, D.Q. Zhang, Int. J. Heat Mass Transfer 80 (2015) 288–300 [CrossRef] [Google Scholar]
  60. T.H.C. Childs, C. Hauser, M. Badrossamay, CIRP Ann. - Manuf. Technol. 53 (2004) 191–194 [CrossRef] [Google Scholar]
  61. F.J. Gürtler, M. Karg, K.H. Leitz, M. Schmidt, Phys. Procedia 41 (2013) 881–886 [CrossRef] [Google Scholar]
  62. M. Shiomi, K. Osakada, K. Nakamura, T. Yamashita, F. Abe, CIRP Annals - Manuf. Technol. 53 (2004) 195–198 [CrossRef] [Google Scholar]
  63. M. Smith, Z. Guan, W.J. Cantwell, Int. J. Mech. Sci. 67 (2013) 28–41 [CrossRef] [Google Scholar]
  64. Y. Li, D. Gu, Mater. Des. 63 (2014) 856–867 [CrossRef] [Google Scholar]
  65. S. Mohanty, J.H. Hattel, Phys. Procedia 56 (2014) 379–389 [CrossRef] [Google Scholar]
  66. D. Riedlbauer, M. Drexler, D. Drummer, P. Steinmann, J. Mergheim, Comput. Mater. Sci. 93 (2014) 239–248 [CrossRef] [Google Scholar]
  67. A. V. Gusarov, I. Smurov, Appl. Surf. Sci. 255 (2009) 5595–5599 [CrossRef] [Google Scholar]
  68. K. Zeng, D. Pal, C. Teng, B.E. Stucker, Additive Manuf. 6 (2015) 67–73 [CrossRef] [Google Scholar]
  69. F. Verhaeghe, T. Craeghs, J. Heulens, L. Pandelaers, Acta Mater. 57 (2009) 6006–6012 [CrossRef] [Google Scholar]
  70. P. Foteinopoulos, A. Papacharalampopoulos, P. Stavropoulos, CIRP J. Manuf. Sci. Technol. (2017) DOI: https://doi.org/10.1016/j.cirpj.2017.09.007 [Google Scholar]
  71. X. Gong, T. Anderson, K. Chou, in: Proceedings of the ASME/ISCIE 2012 International Symposium on Flexible Automation, American Society of Mechanical Engineers, St. Louis, 2012, pp. 507–515 [CrossRef] [Google Scholar]
  72. K. Kanaya, S. Okayama, J. Phys. D: Appl. Phys. 5 (1972) 43 [CrossRef] [Google Scholar]
  73. M. Markl, R. Ammer, U. Ljungblad, U. Rüde, C. Körner, Procedia Comput. Sci. 18 (2013) 2127–2136 [CrossRef] [Google Scholar]
  74. J. Romano, L. Ladani, J. Razmi, M. Sadowski, Additive Manuf. 8 (2015) 1–11 [CrossRef] [Google Scholar]
  75. B. Cheng, S. Price, J. Lydon, K. Cooper, K. Chou, J. Manuf. Sci. Eng. 136 (2014) 061018 [CrossRef] [Google Scholar]
  76. R. Ammer, M. Markl, U. Ljungblad, C. Körner, U. Rüde, Comput. Math. Appl. 67 (2014) 318–330 [CrossRef] [Google Scholar]
  77. D. Riedlbauer, T. Scharowsky, R.F. Singer, P. Steinmann, C. Körner, J. Mergheim, Int. J. Adv. Manuf. Technol. 88 (2016) 1309–1317 [CrossRef] [Google Scholar]
  78. M. Gharbi, P. Peyre, C. Gorny, M. Carin, S. Morville, P. Le Masson, D. Carron, R. Fabbro, J. Mater. Process. Technol. 213 (2013) 791–800 [CrossRef] [Google Scholar]
  79. S. Morville, M. Carin, P. Peyre, M. Gharbi, D. Carron, P. Le Masson, R. Fabbro, J. Laser Appl. 24 (2012) 032008 [CrossRef] [Google Scholar]
  80. M.N. Ahsan, C.P. Paul, L.M. Kukreja, A.J. Pinkerton, J. Mater. Process. Technol. 211 (2011) 602–609 [CrossRef] [Google Scholar]
  81. J. Lin, Opt & Laser Technol. 31 (1999) 233–238 [CrossRef] [Google Scholar]
  82. C. Lalas, K. Tsirbas, K. Salonitis, G. Chryssolouris, Int. J. Adv. Manuf. Technol. 32 (2007) 34–41 [CrossRef] [Google Scholar]
  83. K. Salonitis, A. Stournaras, P. Stavropoulos, G. Chryssolouris, Int. J. Adv. Manuf. Technol. 40 (2009) 316–323 [CrossRef] [Google Scholar]
  84. A.J. Pinkerton, L. Li, J. Phys. D: Appl. Phys. 37 (2004) 1885–1895 [CrossRef] [Google Scholar]
  85. P. Peyre, P. Aubry, R. Fabbro, R. Neveu, A. Longuet, J. Phys. D: Appl. Phys. 41 (2008) 025403 [CrossRef] [Google Scholar]
  86. M.N. Ahsan, A.J. Pinkerton, Model. Simul. Mater. Sci. Eng. 19 (2011) 055003 [CrossRef] [Google Scholar]
  87. H. Li, P. Wang, L. Qi, H. Zuo, S. Zhong, X. Hou, Comput. Mater. Sci. 65 (2012) 291–301 [CrossRef] [Google Scholar]
  88. H.O. Zhang, F.R. Kong, G.L. Wang, L.F. Zeng, J. Appl. Phys. 100 (2006) 123522 [CrossRef] [Google Scholar]
  89. K. Salonitis, L. D'Alvise, B. Schoinochoritis, D. Chantzis, Int. J. Adv. Manuf. Technol. 85 (2015) 2401–2411 [CrossRef] [Google Scholar]
  90. J. Ding, P. Colegrove, J. Mehnen, S. Williams, F. Wang, P.S. Almeida, Int. J. Adv. Manuf. Technol. 70 (2014) 227–236 [CrossRef] [Google Scholar]
  91. E. Foroozmehr, R. Kovacevic, Int. J. Adv. Manuf. Technol. 51 (2010) 659–669 [CrossRef] [Google Scholar]
  92. T. Mukherjee, W. Zhang, T. DebRoy, Comput. Mater. Sci. 126 (2017) 360–372 [CrossRef] [Google Scholar]
  93. H.M. Chae, Ph.D. thesis, University of Michigan, Michigan, USA, 2013 [Google Scholar]
  94. S. Ghosh, J. Choi, J. Laser Appl. 17 (2005) 144–158 [CrossRef] [Google Scholar]
  95. J. Xiong, G. Zhang, J. Hu, Y. Li, Int. J. Adv. Manuf. Technol. 69 (2013) 743–751 [CrossRef] [Google Scholar]
  96. A. Crespo, in: A. Ahsan (Ed.) Modelling of heat transfer and phase transformations in the rapid manufacturing of titanium components, INTECH Open Access Publisher, London, United Kingdom, 2011 [Google Scholar]
  97. A. Crespo, A. Deus, R. Vilar, in: Proceedings of the XVII International Symposium on Gas Flow and Chemical Lasers and High Power Lasers, Lisboa, 2008, pp. 713120–713121 [CrossRef] [Google Scholar]
  98. A. Kumar, S. Ghosh, B.K. Dhindaw, Acta Mater. 58 (2010) 122–133 [CrossRef] [Google Scholar]
  99. L. Costa, R. Vilar, T. Reti, A.M. Deus, Acta Mater. 53 (2005) 3987–3999 [CrossRef] [Google Scholar]
  100. J. Yang, F. Wang, Int. J. Adv. Manuf. Technol. 43 (2009) 1060–1068 [CrossRef] [Google Scholar]
  101. F. Kong, H. Zhang, G. Wang, in: Proceedings of the Progress in Electromagnetics Research Symposium, Beijing, 2009, pp. 946 [Google Scholar]
  102. S. Shakeri, S. Chandra, Int. J. Heat. Mass Transf. 45 (2002) 4561–4575 [CrossRef] [Google Scholar]
  103. R. Dhiman, S. Chandra, Int. J. Heat Mass Transf. 48 (2005) 5625–5638 [CrossRef] [Google Scholar]
  104. M. Bussmann, S. Chandra, J. Mostaghimi, Phys. Fluids 12 (2000) 3121–3132 [CrossRef] [Google Scholar]
  105. W. Zhou, D. Loney, F.L. Degertekin, D.W. Rosen, A.G. Fedorov, AIChE J. 59 (2013) 3071–3082 [CrossRef] [Google Scholar]
  106. V.D. Fachinotti, A. Cardona, B. Baufeld, O. Van der Biest, Acta Mater. 60 (2012) 6621–6630 [CrossRef] [Google Scholar]
  107. J.M. Waldvogel, D. Poulikakos, Int. J. Heat Mass Transf. 40 (1997) 295–309 [CrossRef] [Google Scholar]
  108. M. Pasandideh–Fard, S. Chandra, J. Mostaghimi, Int. J. Heat Mass Transf. 45 (2002) 2229–2242 [CrossRef] [Google Scholar]
  109. L.U.O. Jun, L.H. Qi, L. Li, Y.A.N.G. Fang, X.S. Jiang, Trans. Nonferrous Metals Soc. China 18 (2008) 686–690 [CrossRef] [Google Scholar]
  110. D.W. Tian, C.Q. Wang, Y.H. Tian, Trans. Nonferrous Metals Society of China 18 (2008) 1201–1208 [CrossRef] [Google Scholar]
  111. T. Lim, S. Han, J. Chung, J.T. Chung, S. Ko, C.P. Grigoropoulos, Int. J. Heat Mass Transf. 52 (2009) 431–441 [CrossRef] [Google Scholar]
  112. M. Pasandideh–Fard, R. Bhola, S. Chandra, J. Mostaghimi, Int. J. Heat Mass Transf. 41 (1998) 2929–2945 [CrossRef] [Google Scholar]
  113. S.D. Aziz, S. Chandra, Int. J. Heat Mass Transf. 43 (2000) 2841–2857 [CrossRef] [Google Scholar]
  114. A.J. Pinkerton, J. Phys. D: Appl. Phys. 40 (2007) 7323 [CrossRef] [Google Scholar]
  115. S.M. Kelly, S.L. Kampe, Metall. Mater. Trans. A 35 (2004) 1869–1879 [CrossRef] [Google Scholar]
  116. H. Qi, J. Mazumder, H. Ki, J. Appl. Phys. 100 (2006) 024903 [CrossRef] [Google Scholar]
  117. X. Bai, H. Zhang, G. Wang, Int. J. Adv. Manuf. Technol. 69 (2013) 1087–1095 [CrossRef] [Google Scholar]
  118. X. Bai, H. Zhang, G. Wang, Int. J. Adv. Manuf. Technol. 77 (2015) 717–727 [CrossRef] [Google Scholar]
  119. H. Chen, Y.F. Zhao, Rapid Prototyp. J. 22 (2016) 527–538 [CrossRef] [Google Scholar]
  120. J. Moon, J.E. Grau, V. Knezevic, M.J. Cima, E.M. Sachs, J. Am. Ceramic Soc. 85 (2002) 755–762 [CrossRef] [Google Scholar]
  121. E. Sachs, E. Vezzetti, J. Mater. Process. Technol. 161 (2005) 509–515 [CrossRef] [Google Scholar]
  122. T Peng in: G. Seliger, Prof. H. Kohl, J. Mallon (Eds.), Proceedings of the 13th Global Conference on Sustainable Manufacturing − Decoupling Growth from Resource Use, Elsevier, 2016, pp. 62–67 [Google Scholar]
  123. X. Xu, S. Meteyer, N. Perry, Y.F. Zhao, Int. J. Prod. Res. 53 (2015) 7005–7015 [CrossRef] [Google Scholar]
  124. D. Ahn, J.H. Kweon, S. Kwon, J. Song, S. Lee, J. Mater. Process. Technol. 209 (2009) 5593–5600 [CrossRef] [Google Scholar]
  125. K. Thrimurthulu, P.M. Pandey, N.V. Reddy, Int. J. Mach. Tools Manuf. 44 (2004) 585–594 [CrossRef] [Google Scholar]
  126. P.M. Pandey, N.V. Reddy, S.G. Dhande, J. Mater. Process Technolo. 132 (2003) 323–331 [CrossRef] [Google Scholar]
  127. R. Anitha, S. Arunachalam, P. Radhakrishnan, J. Mater. Process. Technol. 118 (2001) 385–388 [CrossRef] [Google Scholar]
  128. A. Boschetto, V. Giordano, F. Veniali, Int. J. Adv. Manuf. Technol. 67 (2013) 2727–2742 [CrossRef] [Google Scholar]
  129. A. Boschetto, L. Bottini, Int. J. Advanced Manuf. Technol. 73 (2014) 913–928 [CrossRef] [Google Scholar]
  130. Y. Zhang, K. Chou, Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf. 222 (2008) 959–968 [CrossRef] [Google Scholar]
  131. A.K. Sood, R.K. Ohdar, S.S. Mahapatra, Mater. Des. 30 (2009) 4243–4252 [CrossRef] [Google Scholar]
  132. D. Croccolo, M. De Agostinis, G. Olmi, Comput. Mater. Sci. 79 (2013) 506–518 [CrossRef] [Google Scholar]
  133. C. Bellehumeur, L. Li, Q. Sun, P. Gu, J. Manuf. Process. 6 (2004) 170–178 [CrossRef] [Google Scholar]
  134. J.F. Rodríguez, J.P. Thomas, J.E. Renaud, Rapid Prototyp. J. 9 (2003) 219–230 [CrossRef] [Google Scholar]
  135. Y. Zhang, Y.K. Chou, Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf. 220 (2006) 1663–1671 [CrossRef] [Google Scholar]
  136. N. Mostafa, H.M. Syed, S. Igor, G. AndrewTsinghua, Sci. Technol. 14 (2009) 29–37 [Google Scholar]
  137. S.H. Ahn, M. Montero, D. Odell, S. Roundy, P.K. Wright, Rapid Prototy. J. 8 (2002) 248–257 [CrossRef] [Google Scholar]
  138. A.K. Sood, R.K. Ohdar, S.S. Mahapatra, J. Adv. Research 3 (2012) 81–90 [CrossRef] [Google Scholar]
  139. A.K. Sood, R.K. Ohdar, S.S. Mahapatra, Mater. Des. 31 (2010) 287–295 [CrossRef] [Google Scholar]
  140. A.K. Sood, A. Equbal, V. Toppo, R.K. Ohdar, S.S. Mahapatra, CIRP J. Manuf. Sci. Technol. 5 (2012) 48–54 [CrossRef] [Google Scholar]
  141. B.H. Lee, J. Abdullah, Z.A. Khan, J. Mater. Process. Technol. 169 (2005) 54–61 [CrossRef] [Google Scholar]
  142. G. Komineas, P. Foteinopoulos, A. Papacharalampopoulos, P. Stavropoulos, 15th Global Conference on Sustainable Manufacturing, Procedia Manufacturing, Elsevier, Israel, 2017 [Google Scholar]
  143. H. Fujimoto, Y. Shiotani, A.Y. Tong, T. Hama, H. Takuda, Int. J. Multiph. Flow 33 (2007) 317–332 [CrossRef] [Google Scholar]
  144. M. Sugavaneswaran, G. Arumaikkannu, Mater. Des. 54 (2014) 779–785 [CrossRef] [Google Scholar]
  145. D.Y. Shin, P. Grassia, B. Derby, Int. J. Mech. Sci. 46 (2004) 181–199 [CrossRef] [Google Scholar]
  146. H.J. Chang, M.H. Tsai, W.S. Hwang, Appl. Math. Model. 36 (2012) 3067–3079 [CrossRef] [Google Scholar]
  147. P.H. Chen, W.C. Chen, S.H. Chang, Int. J. Mech. Sci. 39 (1997) 683–695 [CrossRef] [Google Scholar]
  148. P.H. Chen, H.Y. Peng, H.Y. Liu, S.L. Chang, T.I. Wu, C.H. Cheng, Int. J. Mech. Sci. 41 (1999) 235–248 [CrossRef] [Google Scholar]
  149. N. Nikolopoulos, A. Theodorakakos, G. Bergeles, Int. J. Heat Mass Transf. 50 (2007) 303–319 [CrossRef] [Google Scholar]
  150. N. Ramakrishnan, P.K. Rajesh, P. Ponnambalam, K. Prakasan, J. Mater. Process. Technol. 169 (2005) 372–381 [CrossRef] [Google Scholar]
  151. C. Rembe, S. aus der Wiesche, E.P. Hofer, Microelectron. Reliab. 40 (2000) 525–532 [CrossRef] [Google Scholar]
  152. H. Fujimoto, T. Ogino, H. Takuda, N. Hatta, Int. J. Multiph Flow 27 (2001) 1227–1245 [CrossRef] [Google Scholar]
  153. H.C. Wu, W.S. Hwang, H.J. Lin, Mater. Sci. Eng. : A 373 (2004) 268–278 [CrossRef] [Google Scholar]
  154. Y.S. Chen, Y.L. Huang, C. H. Kuo, S.H. Chang, Int. J. Mech. Sci. 49 (2007) 733–740 [CrossRef] [Google Scholar]
  155. Z. Zhao, D. Poulikakos, J. Fukai, Int. J. Heat Mass Transf. 39 (1996) 2771–2789 [CrossRef] [Google Scholar]
  156. B.K. Paul, V. Voorakarnam, J. Manuf. Process. 3 (2001) 94–101 [CrossRef] [Google Scholar]
  157. G. Chryssolouris, J.D. Kechagias, J.L. Kotselis, D.A. Mourtzis, S.G. Zannis, in: Proceedings of the 8th European Conference on Rapid Prototyping and Manufacturing, Nottingham, 1999, pp. 141–152 [Google Scholar]
  158. G. Chryssolouris, J.D. Kechagias, J.L. Kotselis, D.A. Mourtzis, S.G. Zannis, in: 8th European Conference on Rapid Prototyping and Manufacturing, Nottingham, 1999, pp. 141–152 [Google Scholar]
  159. A. Das, G. Madras, N. Dasgupta, A.M. Umarji, J. Eur. Ceramic Soc. 23 (2003) 1013–1017 [CrossRef] [Google Scholar]
  160. F.O. Sonmez, H.T. Hahn, Rapid Prototyp. J. 4 (1998) 26–36 [CrossRef] [Google Scholar]
  161. G. Chryssolouris, J. Kechagias, P. Moustakas, E. Koutras, CIRP J. Manuf. Sys. 32 (2003) 319–322 [Google Scholar]
  162. J. Kechagias, S. Maropoulos, S. Karagiannis, Rapid Prototyp. J. 10 (2004) 297–304 [CrossRef] [Google Scholar]
  163. A.K. Sridharan, S. Joshi, J. Manuf. Sys. 19 (2001) 355–364 [CrossRef] [Google Scholar]
  164. L. Flach, A.D. Klosterman, P.R. Chartoff, in: Proceedings of Solid Freeform Fabrication Symposium, 1997, pp. 677–688 [Google Scholar]
  165. L. Flach, M.A. Jacobs, D.A. Klosterman, R.P. Chartoff, in Proceedings of the Solid Freeform Fabrication Symposium, 1998, pp. 407–416 [Google Scholar]
  166. B.G. Mekonnen, G. Bright, A. Walker, in: D. K. Mandal, C. S. Syan, (Eds.) in: Proceedings of the CAD/CAM, Robotics and Factories of the Future, New Delhi, 2016, Springer, India, 2016, pp. 207–216 [CrossRef] [Google Scholar]
  167. G.J. Ram, Y. Yang, B.E. Stucker, J. Manuf. Sys. 25 (2006) 221–238 [CrossRef] [Google Scholar]
  168. A. Siddiq, T. El Sayed, Comput. Mater. Sci. 51 (2012) 241–251 [CrossRef] [Google Scholar]
  169. Y. Yang, G.D. Janaki Ram, B.E. Stucker, Rapid Prototyp. J. 16 (2010) 20–28 [CrossRef] [Google Scholar]
  170. G.S. Kelly, S.G. Advani, J.W. Gillespie, T.A. Bogetti, J. Mater. Process. Technol. 213 (2013) 1835–1845 [CrossRef] [Google Scholar]
  171. C.S. Zhang, L. Li, Ultrasonics 50 (2010) 811–823 [CrossRef] [Google Scholar]
  172. D. Pal, B. E. Stucker, Virtual Phys. Prototyp. 7, (2012) 65–79 [CrossRef] [Google Scholar]
  173. A. Siddiq, E. Ghassemieh, Int. J. Adv. Manuf. Technol. 54 (2011) 997–1009 [CrossRef] [Google Scholar]
  174. D. Pal, N. Patil, K. Zeng, B. Stucker, J. Manuf. Sci. Eng. 136 (2014) 066102 [Google Scholar]
  175. C.Y. Kong, R.C. Soar, P.M. Dickens, Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci. 219 (2005) 83–91 [CrossRef] [Google Scholar]
  176. C.D. Hopkins, P.J. Wolcott, M.J. Dapino, A.G. Truog, S.S. Babu, S.A. Fernandez, J. Eng. Mater. Technol. 134 (2012) 011004 [CrossRef] [Google Scholar]
  177. J.O. Wilson, D. Rosen, in: Proceedings of the ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, American Society of Mechanical Engineers, Long Beach, 2005, pp. 451–460 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.