Open Access
Issue |
Manufacturing Rev.
Volume 3, 2016
|
|
---|---|---|
Article Number | 2 | |
Number of page(s) | 17 | |
DOI | https://doi.org/10.1051/mfreview/2016001 | |
Published online | 05 February 2016 |
- J.M. Allwood, J.M. Cullen, Sustainable materials with both eyes open, Uit Cambridge Ltd., Cambridge, 2011. [Google Scholar]
- ZF Friedrichshafen AG, Weight-Saving ZF Technology for the Chassis, https://www.zf.com/china/media/en_cn/china/regional_content_china/news_cn/auto_shanghai/press_release/tx05_autoshanghai15_zf_lightweight_design_en.pdf [October 19, 2015]. [Google Scholar]
- M. Merklein, A.E. Tekkaya, A. Brosius, S. Opel, J. Koch, Overview on sheet-bulk metal forming processes, Proceedings of the 10th International Conference on Technology of Plasticity, Aachen, Germany, 2011, pp. 1109–1114. [Google Scholar]
- M. Merklein, J.M. Allwood, B.-A. Behrens, A. Brosius, H. Hagenah, K. Kuzman, K. Mori, A.E. Tekkaya, A. Weckenmann, Bulk forming of sheet metal, Annals of the CIRP 61 (2012) 725–745. [Google Scholar]
- M. Merklein, J. Koch, S. Opel, T. Schneider, Fundamental investigations on the material flow at combined sheet and bulk metal forming processes, Annals of the CIRP 60 (2011) 283–286. [Google Scholar]
- DIN 8582, Manufacturing processes forming – classification, subdivision, terms and definitions, alphabetical index, Beuth Verlag GmbH, Berlin, Germany, 2003. [Google Scholar]
- M. Merklein, H. Hagenah, T. Schneider, Sheet-bulk metal forming processes – state of the art and its perspectives, in: R. Kolleck (Ed.), TTP 2013 – Tools and Technologies for Processing Ultra High Strength Materials, Verlag der TU Graz, Graz, Austria, 2013, pp. 197–204. [Google Scholar]
- T. Schneider, U. Vierzigmann, M. Merklein, Analysis of varying properties of semi-finished products in sheet-bulk metal forming of functional components, AIP Conference Proceedings 1567 (2014) 930–933. [Google Scholar]
- T. Schneider, M. Merklein, Manufacturing of geared sheet metal components by a single-stage sheet-bulk metal forming process, in: D. Dimitrov, C. Schutte (Eds.), Proc. Conf. Competitive Manufacturing, Stellenbosch University Publishing, Stellenbosch, South Africa, 2013, pp. 177–182. [Google Scholar]
- D. Gröbel, P. Hildenbrand, U. Engel, M. Merklein, Influence of tailored blanks on forming of cold forged functional elements in a sheet bulk metal forming process, in: Stahl-Institut VDEh (Ed.), Proceedings METEC & 2nd ESTAT, Steel institute VDEh, Düsseldorf, Germany, 2015, pp. 010011–010012. [Google Scholar]
- M. Merklein, J. Koch, T. Schneider, S. Opel, U. Vierzigmann, Manufacturing of complex functional components with variants by using a new metal forming process – sheet-bulk metal forming, International Journal of Material Forming 3 (2010) 347–350. [CrossRef] [Google Scholar]
- D. Gröbel, J. Koch, U. Vierzigmann, U. Engel, M. Merklein, Investigations and approaches on material flow of non-uniform arranged cavities in sheet bulk metal forming processes, Procedia Engineering 81 (2014) 401–406. [Google Scholar]
- N. Bay, A. Azushima, P. Groche, I. Ishibashi, M. Merklein, M. Morishita, T. Nakamura, S. Schmid, M. Yoshida, Environmentally Benign Tribo-systems for metal forming, Annals of the CIRP 59 (2010) 760–780. [Google Scholar]
- Z.G. Wang, Y. Yoshikawa, K. Osakada, A new forming method of solid bosses on a cup made by deep drawing, Annals of the CIRP 62 (2013) 291–294. [Google Scholar]
- N. Bay, T. Nakamura, S. Schmid, Green lubricants for metal forming, in: Proceeding of the 4th International Conference on Tribology in Manufacturing Processes, Nice, 2010, pp. 5–28. [Google Scholar]
- S. Twardy, O. Riemer, E. Brinksmeier, Tribology of micro milled surfaces, Key Engineering Materials 447–448 (2010) 681–684. [CrossRef] [Google Scholar]
- R. Hense, P. Kersting, U. Vierzigmann, M. Löffler, D. Biermann, M. Merklein, C. Wels, High-feed milling of tailored surfaces for sheet-bulk metal forming tools, Production Engineering 9 (2014) 215–223, DOI: 10.1007/s11740-014-0597-0. [CrossRef] [Google Scholar]
- H. Hetzner, W. Tillmann, S. Tremmel, J. Herper, Tribologische Dünnschichten für die Blechmassivumformung, 1, Workshop Blechmassivumformung, Meisenbach-Verlag, Bamberg, Germany, 2011, pp. 139–158. [Google Scholar]
- M. Sedlacek, B. Podgornik, J. Vizintin, Influence of surface preparation on roughness parameters, friction and wear, Wear 266 (2009) 482–487. [CrossRef] [Google Scholar]
- U. Vierzigmann, M. Merklein, U. Engel, Tailored surfaces in sheet-bulk metal forming, Proceeding of the 4th International Conference on Tribology in Manufacturing Processes 2 (2010) 541–550. [Google Scholar]
- A. Zabel, T. Surmann, A. Peuker, Surface structuring and tool path planning for efficient milling of dies, in: 7th International Conference on High Speed Machining Proceedings, Bamberg, 2008, pp. 155–160. [Google Scholar]
- H.E. Friedrich, Leichtbau in der Fahrzeugtechnik, Springer Vieweg, Wiesbaden, Germany, 2013. [CrossRef] [Google Scholar]
- Z. Marciniak, A rocking-die technique for cold-forming operations, Machinery and Production Engineering 117 (1970) 792–797. [Google Scholar]
- Heinrich Schmid Maschinen- und Werkzeugbau AG, Umformtechnik 2 (2006) 28–31. [Google Scholar]
- J.J. Sheu, C.H. Yu, The cold orbital forging die and process design of a hollow-ring gear part, Proceedings of the 35th International Matador Conference 6 (2007) 111–114. [Google Scholar]
- J.R. Maicki, Orbital forging, Metallurgia and Metal Forming (1977) 265–269. [Google Scholar]
- K. Lange, Umformtechnik, Handbuch für Industrie und Wissenschaft, Band 2: Massivumformung. 2nd ed., Springer-Verlag, Berlin, Germany, 1988. [CrossRef] [Google Scholar]
- X. Han, L. Hua, Investigation on contact parameters in cold rotary forging using a 3D FE method, International Journal of Advanced Manufacturing Technology 62 (2012) 1087–1106. [CrossRef] [Google Scholar]
- P.M. Standring, Characteristics of rotary forging as an advanced manufacturing tool, Proceedings of the Institution of Mechanical Engineers Part B 215 (2001) 935–945. [Google Scholar]
- H.-K. Oh, S. Choi, A study on center thinning in the rotary forging of a circular plate, Journal of Materials Processing Technology 66 (1997) 101–106. [Google Scholar]
- X. Han, L. Hua, Comparison between cold rotary forging and conventional forging, Journal of Mechanical Science and Technology 23 (2009) 2668–2678. [CrossRef] [Google Scholar]
- G. Liu, S.J. Yuan, Z.R. Wang, D.C. Zhou, Explanation of the mushroom effect in the rotary forging of a cylinder, Journal of Materials Processing Technology 151 (2004) 178–182. [Google Scholar]
- S. Opel, Herstellung prozessangepasster Halbzeuge mit variabler Blechdicke durch die Anwendung von Verfahren der Blechmassivumformung, Meisenbach Verlag, Erlangen, Germany, 2013. [Google Scholar]
- P. Hildenbrand, R. Schulte, M. Merklein, New process strategies to manufacture tailored blanks out of DP600 by orbital forming, Applied Mechanics and Materials 794 (2015) 144–151. [CrossRef] [Google Scholar]
- M. Merklein, P. Hildenbrand, T. Schneider, Application of process adapted semi-finished parts for the production of thin-walled components via sheet-bulk forming, in: R. Kawalla (Ed.), AutoMetForm/SFU 2014, ACATRAIN e.V, Freiberg, Germany, 2014, pp. 58–66. [Google Scholar]
- M. Merklein, R. Plettke, S. Opel, Orbital forming of tailored blanks from sheet metal, Annals of the CIRP 61 (2012) 263–266. [CrossRef] [Google Scholar]
- U. Vierzigmann, J. Koch, M. Merklein, U. Engel, Material flow in sheet-bulk metal forming, Key Engineering Materials 504–506 (2012) 1035–1040. [Google Scholar]
- M. Löffler, T. Schneider, U. Vierzigmann, U. Engel, M. Merklein, Locally adapted tribological conditions as a method for influencing the material flow in sheet-bulk metal forming processes, Key Engineering Materials 639 (2015) 267–274. [Google Scholar]
- M. Löffler, D. Gröbel, U. Engel, K. Andreas, M. Merklein, Analysis of effectiveness of locally adapted tribological conditions for improving product quality in sheet-bulk metal forming, Applied Mechanics and Materials 794 (2015) 81–88. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.