Manufacturing Review

Open Access

Study of laser bending of a preloaded Titanium alloy sheet 25

Xiufeng Wang, Dongxu Liu, Weidong Li, Lang Xu and Yaoguo Dong

Published online: 17 February 2015

DOI: https://doi.org/10.1051/mfreview/2015002

• Abstract
• Full HTML
• PDF (1.295 MB)
• ePUB (2.075 MB)
• References

Open Access

Review

A State-of-the-art overview - Recent development in low friction and wear-resistant coatings and surfaces for high-temperature forming tools 24

Zhenxue Zhang and Hanshan Dong

Published online: 17 February 2015

DOI: https://doi.org/10.1051/mfreview/2015001

• Abstract
• Full HTML
• PDF (1.669 MB)
• ePUB (2.953 MB)
• References

Open Access

Review

Friction related size-effect in microforming – a review 23

Chunju Wang, Bin Guo and Debin Shan

Published online: 23 January 2015

DOI: https://doi.org/10.1051/mfreview/2014022

• Abstract
• Full HTML
• PDF (4.577 MB)
• ePUB (6.869 MB)
• References

Open Access

Vegetable-oil based metalworking fluids research developments for machining processes: survey, applications and challenges 22

Sunday Albert Lawal, Imtiaz Ahmed Choudhury, Ibrahim Ogu Sadiq and Adedipe Oyewole

Published online: 24 December 2014

DOI: https://doi.org/10.1051/mfreview/2014021

• Abstract
• Full HTML
• PDF (558.8 KB)
• ePUB (1.254 MB)
• References

Open Access

An efficient genetic algorithm for a hybrid flow shop scheduling problem with time lags and sequence-dependent setup time 21

Mohammad Farahmand-Mehr, Parviz Fattahi, Mohammad Kazemi, Hassan Zarei and Ali Piri

Published online: 18 December 2014

DOI: https://doi.org/10.1051/mfreview/2014020

• Abstract
• Full HTML
• PDF (434.5 KB)
• ePUB (1.425 MB)
• References

Open Access

Review

Vapour deposition technologies for the fabrication of hot-forming tools: a review 20

Gonzalo G. Fuentes, Eluxka Almandoz, Rafael J. Rodríguez, Hanshan Dong, Yi Qin, Sonia Mato and Francisco Javier Pérez-Trujillo

Published online: 18 December 2014

DOI: https://doi.org/10.1051/mfreview/2014019

• Abstract
• Full HTML
• PDF (2.717 MB)
• ePUB (4.510 MB)
• References

Open Access

Review

An explorative study to enable environmentally conscious manufacturing for an industrial gearbox manufacturing organization 19

Parag Sen, Parimal Pal and Mousumi Roy

Published online: 21 November 2014

DOI: https://doi.org/10.1051/mfreview/2014018

• Abstract
• Full HTML
• PDF (413.3 KB)
• ePUB (1.297 MB)
• References

Open Access

Experimental and theoretical investigations on temperature distribution at the joint interface for copper joints using ultrasonic welding 18

Sooriya Elangovan

Published online: 28 October 2014

DOI: https://doi.org/10.1051/mfreview/2014017

• Abstract
• Full HTML
• PDF (1.916 MB)
• ePUB (860.9 KB)
• References

Open Access

Evaluation of experimental and numerical investigations into micro-hydroforming of platinum tubes for an industrial application 17

Christoph Hartl, Herwig Schiefer and Andreas Chlynin

Published online: 28 October 2014

DOI: https://doi.org/10.1051/mfreview/2014015

• Abstract
• Full HTML
• PDF (1.334 MB)
• ePUB (800.9 KB)
• References

Open Access

Plate forging of drawn cup with flange including thickening of corners 16

Yohei Abe, Ken-ichiro Mori and Takumi Ito

Published online: 22 October 2014

DOI: https://doi.org/10.1051/mfreview/2014016

• Abstract
• Full HTML
• PDF (1.980 MB)
• ePUB (800.9 KB)
• References

Open Access

Review

A review of automation in manufacturing illustrated by a case study on mixed-mode hot forging 15

Colin S. Harrison

Published online: 14 October 2014

DOI: https://doi.org/10.1051/mfreview/2014012

• Abstract
• Full HTML
• PDF (2.660 MB)
• ePUB (815.7 KB)
• References

Open Access

Reducing computational requirement of stability analysis of milling by partial averaging 14

Ozoegwu Chigbogu Godwin and Omenyi Sam

Published online: 25 September 2014

DOI: https://doi.org/10.1051/mfreview/2014014

• Abstract
• Full HTML
• PDF (1.060 MB)
• ePUB (981.8 KB)
• References

Open Access

An electromagnetism-inspired method for a generalized flowshop problem 13

Majid Khalili

Published online: 09 September 2014

DOI: https://doi.org/10.1051/mfreview/2014013

• Abstract
• Full HTML
• PDF (999.4 KB)
• ePUB (834.7 KB)
• References

Open Access

Modelling and optimization of Nd:YAG laser micro-turning process during machining of aluminum oxide (Al₂O₃) ceramics using response surface methodology and artificial neural network 12

Golam Kibria, Biswanath Doloi and Bijoy Bhattacharyya

Published online: 09 September 2014

DOI: https://doi.org/10.1051/mfreview/2014011

• Abstract
• Full HTML
• PDF (1.053 MB)
• ePUB (802.0 KB)
• References

Open Access

Manufacturing nanomaterials: from research to industry 11

Costas A. Charitidis, Pantelitsa Georgiou, Malamatenia A. Koklioti, Aikaterini-Flora Trompeta and Vasileios Markakis

Published online: 08 September 2014

DOI: https://doi.org/10.1051/mfreview/2014009

• Abstract
• Full HTML
• PDF (1.388 MB)
• ePUB (829.9 KB)
• References

Open Access

Automotive manufacturing technologies – an international viewpoint 10

Steven Peters, Gisela Lanza, Jun Ni, Jin Xiaoning, Yi Pei-Yun and Marcello Colledani

Published online: 08 September 2014

DOI: https://doi.org/10.1051/mfreview/2014010

• Abstract
• Full HTML
• PDF (1.797 MB)
• ePUB (812.0 KB)
• References

Open Access

Review

A critical review on special forming processes and associated research for lightweight components based on sheet and tube materials 9

Lang Lihui, Liu Kangning, Gaoshen Cai, Xiying Yang, Chan Guo and Guoliang Bu

Published online: 12 August 2014

DOI: https://doi.org/10.1051/mfreview/2014007

• Abstract
• Full HTML
• PDF (6.988 MB)
• ePUB (833.2 KB)
• References

Open Access

Review

Numerical Modelling of Multilayered Coatings – Latest Developments and Applications 8

Deqiang Yin, Zhenhai Xu, Jiling Feng and Yi Qin

Published online: 12 August 2014

DOI: https://doi.org/10.1051/mfreview/2014008

• Abstract
• Full HTML
• PDF (4.151 MB)
• ePUB (821.5 KB)
• References

Open Access

Review

Approaches for modelling and simulation of metal machining – a critical review 7

Jürgen Leopold

Published online: 12 August 2014

DOI: https://doi.org/10.1051/mfreview/2014005

• Abstract
• Full HTML
• PDF (5.308 MB)
• ePUB (848.5 KB)
• References

Open Access

Review

Prediction of microstructural evolution during hot forging 6

Fei Chen, Zhenshan Cui and Jun Chen

Published online: 05 August 2014

DOI: https://doi.org/10.1051/mfreview/2014006

• Abstract
• Full HTML
• PDF (7.435 MB)
• ePUB (893.3 KB)
• References

Open Access

Hot gas bulging of sealed aluminium alloy tube using resistance heating 5

Tomoyoshi Maeno, Ken-ichiro Mori and Kouji Fujimoto

Published online: 28 May 2014

DOI: https://doi.org/10.1051/mfreview/2014004

• Abstract
• Full HTML
• PDF (2.278 MB)
• ePUB (799.1 KB)
• References

Open Access

Punching process including thickening of hole edge for improvement of fatigue strength of ultra-high strength steel sheet 4

Purwo Kadarno, Ken-Ichiro Mori, Yohei Abe and Tatsuro Abe

Published online: 05 May 2014

DOI: https://doi.org/10.1051/mfreview/2014003

• Abstract
• Full HTML
• PDF (1.892 MB)
• ePUB (815.9 KB)
• References

Open Access

Influence of noise shape on excitation kinetics of impurity doped quantum dots 3

Suvajit Pal, Sudarson Sekhar Sinha, Jayanta Ganguly and Manas Ghosh

Published online: 05 May 2014

DOI: https://doi.org/10.1051/mfreview/2014002

• Abstract
• Full HTML
• PDF (463.7 KB)
• ePUB (877.7 KB)
• References

Open Access

Review

Review on powder-based electron beam additive manufacturing technology 2

Xibing Gong, Ted Anderson and Kevin Chou

Published online: 21 April 2014

DOI: https://doi.org/10.1051/mfreview/2014001

• Abstract
• Full HTML
• PDF (2.590 MB)
• ePUB (810.5 KB)
• References

Open Access

Editorial

Editorial 1

Prof. Yi Qin

Published online: 10 April 2013

DOI: https://doi.org/10.1051/mfreview/2013001

• Abstract
• Full HTML
• PDF (89.84 KB)
• ePUB (784.3 KB)