Open Access
Manufacturing Rev.
Volume 1, 2014
Article Number 15
Number of page(s) 14
Published online 14 October 2014
  1. C.S. Harrison, I.G. Ross, M. Bell-Jack, P.W. McEwan, Manual on manufacturing systems simulation for NCR Dundee, University of Dundee, 1989, p. 180 (unpublished).
  2. Industrially orientated software to address cost benefits,
  3. Automated forging of Gas turbine Compressor Blades from billet to finished forging,
  4. G. Chen, H. Wang, K. Zhao, Z. Lin, Modular Calculation of the Jacobian Matrix and Its application to the performance analyses of a Forging robot, Advanced Robotics 23 (2009) 1271–1279.
  5. C. Yan, F. Gao, W. Guo, Co-ordinated kinematic modelling for motion planning of heavy duty manipulators in an integrated open die forging centre, Proceedings IMechE Part B: Journal of Engineering Manufacture 223 (2009) 1299–1313. [CrossRef]
  6. K.W. Lilly, A.S. Melligeri, Dynamic simulation and neural network compliance control of an intelligent forging center, Journal of Intelligent and Robotic Systems 17 (1996) 81–99. [CrossRef]
  7. X. Wang, M. Yukawa, Y. Yoshita, T. Sukeda, T. Ishikawa, Research on some basic deformations in free forging with robot and servo-press, Journal of Materials Processing Technology 209 (2009) 3030–3038. [CrossRef]
  8. R. Badadou, H. Shimahara, G. Hirt, Automated semisolid forging of steel components by means of thixojoining, Solid State Phenomena 116–117 (2006) 383–386.
  13. Jan Hutson, Forge Shop Automation, part 1, April 2009, pp. 20–23,
  14. Jan Hutson, Forge Shop Automation, part 2, July 2009, pp. 23–26,
  15. Robot – from Rossums Universal Robots – Capek, translates as “hard worker” or even “serf labour”.
  22. Private conversation, G. Dr G. Pierce Centre for Ultrasonic Engineering, Univ. Strathclyde.
  24. ABB Robotics “Foundry Magazine”, November 2008.
  25. Retraining Robots, Ben Hargreaves, professional Engineering, 21st April, 2010, pp. 29.
  28. Channel Series 9 Episode 3 segment D, Jet Compressor blades Episode 107.
  30. L. McIntosh, Internal Rolls-Royce report, Department of Mechanical Engineering, University of Strathclyde, 2009 (unpublished).
  36. P.S. Adler, Managing Flexible Automation, California Management Review Spring 30, 3 (1988) 34–57. [CrossRef]
  37. Professional Engineering, Institution of Mechanical Engineers 27, 5 (2014) 27–28.
  39. K. Capek, Rosumovi Univerzální Roboti, Science Fiction Play (1920).
  40. N. Ay, N. Bertschinger, R. Der, F. Guttler, E. Olbrich, Predictive information and explorative behaviour of autonomous robots, European Physical Journal B 63 (2008) 329–339. [CrossRef] [EDP Sciences] [MathSciNet]
  42. T. Hulin, C. Preushe, E. Yechiam, A. Telpaz, V. Schmirgel, U.E. Zimmerman, Haptic and Visual Training of system behavior a case study for Robotic Programming-by-Demonstration, BIO Web of Conferences 1 (2011) 00039. [CrossRef] [EDP Sciences]
  44. S. Calinon, Challenges in adapting imitation and reinforcement learning to compliant robots, Bio Web of Conferences Skills 1 (2011) 00013. [CrossRef] [EDP Sciences]
  45. R.N. Shea, Robot Safety standard Update, RIA meeting, 20–23 Feb 2013, Orlando World Marriot Centre, Orlando Florida.
  48. Durosay et al., Journal of Hand Surgery (European) 36, 5, 383–391. [CrossRef]
  49. A. Razali, Y. Qin, J. Zhao, C.S. Harrison, R. Smith, Development of a new high precision feeder for micro-sheet forming, Journal of Manufacturing Science and Engineering, Transactions of the ASME 133, 6 (2011) 061025, DOI: 10.1115/1.4005046. [CrossRef]
  50. Y. Qin, A. Brockett, Y. Ma, A. Razali, J. Zhao, C.S. Harrison, W. Pan, X. Dai, D. Loziak, Micro-manufacturing research, technology outcomes and development issues, International Journal of Advanced Manufacturing Technology 47, 9–12 (2009) 821–837, DOI: 10.1007/s00170-009-2411-2. [CrossRef]
  51. F.R. Spellman, Nancy E. Whiting, Machine Guarding Handbook, Rowan and Littlefield, 1999.
  52. D.G. Sanders, Reinforced ceramic dies for superplastic forming operations, Journal of Materials Engineering and Performance 13, 6 (2004) 753–757. [CrossRef]
  56. C.S. Harrison, R.J. Twist, K.K.B. Hon, Simulation of the effects of uncertainty and its effects on production planning lead times, in 6th International Conference on Computer Aided Production Engineering, University of Edinburgh, 1990, pp. 237–244.
  57. A. Carrie, Simulation of Manufacturing Systems, John Wiley, 1988.
  60. S. Sakabara, The latest Robot systems which reinforce the manufacturing sector, in Proceedings of the 2003 IEEE International Conference on Robotics and Automation, Taipei, September (2003).
  61. Z. Haiming, Y. Xichen, L. Lifeng, Path planning and off-line programming in laser remanufacturing robot system, Mechanic Automation and Control Engineering (MACE) (2010) 3796–3798. [CrossRef]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.