Open Access
Manufacturing Rev.
Volume 1, 2014
Article Number 22
Number of page(s) 11
Published online 24 December 2014
  1. H.S. Abdalla, S. Patel, The performance and oxidation stability of sustainable metalworking fluid derived from vegetable extracts, Proc. ImechE Part B: J. Eng. Manuf., 220 (2006) 2027–2040. [CrossRef] [Google Scholar]
  2. J.S. McCoy, Introduction: Tracing the historical development of metalworking fluids, in: J.P. Byers (Ed.), Metalworking fluids, 2nd ed., CRC publishers, London, 2006, pp. 1–5. [Google Scholar]
  3. J.A. Schey, Metal deformation processes: friction and lubrication, Marcel Dekker, New York, 1970, pp. 1–2. [Google Scholar]
  4. www.pasvik_inari_net/neu/eng/history_early_metal_age.html, (18:18 GMT on 7th Dec, 2014) [Google Scholar]
  5. www.pasvik_inari_net/neu/eng/history_late_metal_age.html, (18:30 GMT on 7th Dec, 2014) [Google Scholar]
  6. D. Dowson, History of Tribology, Longmans Green, New York, 1979, pp. 177–178, 253. [Google Scholar]
  7. R.S. Woodbury, History of the grinding machine, MIT press, Cambridge, MA, 1959, pp. 21–41. [Google Scholar]
  8. J. Naysmyth, James Naysmyth: an autobiography, S. Stiles (Ed.), Harper and Brothers, London, 1883, p. 437. [CrossRef] [Google Scholar]
  9. W.H.A. Northcott, A treatise on Lathes and turning, Longmans Green and Company, London, 1868. [Google Scholar]
  10. F.W. Taylor, On the art of cutting metals, Society of Mechanical Engineers, New York, 1907, pp. 138–143. [Google Scholar]
  11. W.H. Oldacre, Cutting fluids and process of making the same, US Patent No. 1, 604, 068. [Google Scholar]
  12. Lubrication, The Texas Oil Company, New York, Vol. 39, 1944, pp. 9–16. [Google Scholar]
  13. R. Kelly, Carbide Tool Journal 117 (1985) 28. [Google Scholar]
  14. H.W. Hutton, Process of producing water soluble oil, British Patent No. 13, 999, 1923. [Google Scholar]
  15. H. Ernst, Physics of metal cutting; machining of metals, American Society of Metals, Cleveland, OH, 1938, pp. 1–34. [Google Scholar]
  16. M.E. Merchant, J. Appl. Phys. 16 (1945) 267–275. [Google Scholar]
  17. K.E. Bisshopp, E.F. Lype, S. Raynor, Lubric. Eng. 6 (1950) 70–74. [Google Scholar]
  18. A.O. Schmidt, W.W. Gilbert, O.W. Boston, Trans. AMSE 164 (1942) 703–709. [Google Scholar]
  19. A.O. Schmidt, G.B.V. Sirotkin, Lubric. Eng. 4 (1948) 251–256. [Google Scholar]
  20. H. Ernst, M.E. Merchant, Surface treatment of metals, American Society of Metals, Clevelands, OH, 1948, pp. 299–337. [Google Scholar]
  21. M.C. Shaw, Met. Program 42 (1942) 85–89. [Google Scholar]
  22. M.C. Shaw J. Appl. Mech. 113 (1948) 37–44. [Google Scholar]
  23. M.E. Merchant, Lubric. Eng. 6 (1950) 167–181. [Google Scholar]
  24. B.H. Jennings, New products and equipment: water soluble emulsion, Lubric. Eng. 1 (1945) 79. [Google Scholar]
  25. S.A. Lawal, I.A. Choudhury, Y. Nukman, Evaluation of vegetable and mineral oil-in-water emulsion cutting fluids in turning AISI 4340 steel with coated carbide tools, J. Clean. Prod. 66 (2014) 610–618. [CrossRef] [Google Scholar]
  26. M.A. Xavior, M. Adithan, Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel, J. Mater. Process. Technol. 20 (2009) 900–909. [CrossRef] [Google Scholar]
  27. M.M.A. Khan, M.A.H. Mithu, N.R. Dhar, Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid, J. Mater. Process. Technol. 209 (2009) 5573–5583. [CrossRef] [Google Scholar]
  28. S.J. Ojolo, M.O.H. Amuda, O.Y. Ogunmola, C.U. Ononiwu, Experimental determination of the effect of some straight biological oils on cutting force during cylindrical turning, Revista Matéria 13 (2008) 650–663, [Google Scholar]
  29. S.A. Lawal, M.S. Abolarin, B.I. Ugheoke, E.O. Onche, Performance evaluation of cutting fluids developed from fixed oils, LEJPT 10 (2007) 137–144. [Google Scholar]
  30. S.J. Ojolo, O.S. Ohunakin, Study of rake face action on cutting using palm-kernel oil as lubricant, JETEAS 2 (2011) 30–35, © Scholarlink Research Institute Journals, (ISSN: 2141-7016), [Google Scholar]
  31. P.V. Krishna, R.R. Srikant, D.N. Rao, Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel, Int. J. Mach. Tool Manuf. 50 (2010) 911–916. [CrossRef] [Google Scholar]
  32. W. Belluco, L. De Chiffre, Performance evaluation of vegetable – based oils in drilling austenitic stainless steel, J. Mater. Process. Technol. 148 (2004) 171–176. [CrossRef] [Google Scholar]
  33. D.C. Montgomery, Design and analysis of experiments, 4th ed., Wiley, New York, 1997. [Google Scholar]
  34. E. Kuram, B. Ozcelik, E. Demirbas, E. Sik, Effects of the cutting fluid types and cutting parameters on surface roughness and thrust force, Proceed WCE 2010, Vol. II, WCE 2010, London, UK, June 30–July 2, 2010. [Google Scholar]
  35. E. Kuram, Investigation of vegetable-based cutting fluids performance in drilling M.Sc Thesis, Gebze Institute of Technology, Gebze Kocaeli Turkey, 2009 (in Turkish). [Google Scholar]
  36. J.P. Davim, P.S. Sreejith, R. Gomes, C. Peixoto, Experimental studies on drilling of aluminium (AA1050) under dry, minimum quantity of lubricant, and flood-lubricated conditions, Proc. Inst. Mech. Eng. B: J. Eng. 220 (2006) 1605–1611. [CrossRef] [Google Scholar]
  37. S. Basavarajappa, G. Chandramohan, J.P. Davim, Some studies on drilling of hybrid metal matrix composites based on Taguchi techniques, J. Mater. Process. Technol. 196 (2008) 332–338. [CrossRef] [Google Scholar]
  38. M. Ramulu, P.N. Rao, H. Kao, Drilling of (Al2O3)p/6061 metal matrix composites, J. Mater. Process. Technol. 124 (2008) 244–254. [CrossRef] [Google Scholar]
  39. O.C. Mendes, R.F. Avila, A.M. Abrao, P. Reis, J.P. Davim, The performance of cutting fluids when machining aluminium alloys, Ind. Lubr. Tribol. 58 (2006) 260–268. [CrossRef] [Google Scholar]
  40. R. Shetty, R. Pai, S.S. Rao, Experimental studies on turning of discontinuously reinforced aluminium composites under dry, oil water emulsion and steam lubricated conditions using Taguchi’s technique, G.U. J. Sci. 22 (2009) 21–32. [Google Scholar]
  41. A. Rivero, G. Aramendi, S. Herranz, L.N. López de Lacalle, An experimental investigation of the effect of coatings and cutting parameters on the dry drilling performance of aluminium alloys, Int. J. Adv. Manuf. Technol. 28 (2006) 1–11. [CrossRef] [Google Scholar]
  42. C.C. Tsao, An experiment study of hard coating and cutting fluid effect in milling aluminum alloy, Int. J. Adv. Manuf. Technol. 32 (2007) 885–891. [CrossRef] [Google Scholar]
  43. E. Kuram, B.T. Simsek, B. Ozcelik, E. Demirbas, S. Askin, Optimization of the cutting fluids and parameters using Taguchi and ANOVA in milling, Proc. WCE 2010, Vol. II, WCE 2010, London, UK, June 30–July 2, 2010. [Google Scholar]
  44. E.A. Rahim, H. Sasahara, A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys, Tribol. Int. 44 (2011) 309–317. [CrossRef] [Google Scholar]
  45. S.M. Alves, J.F.G. Oliveira, Development of new cutting fluid for grinding process adjusting mechanical performance and environmental impact, J. Mater. Process. Technol. 197 (2006) 185–189. [CrossRef] [Google Scholar]
  46. C. Herrmann, J. Hesselbach, R. Bock, T. Dettmer, Coolants made of native ester – technical, ecological and cost assessment from a life cycle perspective, Proceed of 14th CIRP Int. Conf. on Life Cycle Eng., Tokyo, Japan, 2007. [Google Scholar]
  47. S. Sharif, N.M. Yusof, M.H. Idris, Z.B. Ahmad, I. Sudin, A. Ripin, M.A.H. Mat Zin, Feasibility study of using vegetable oil as a cutting lubricant through the use of minimum quantity lubrication during machining, Research VOT No. 78055, Department of Manufacturing and Industrial Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 2009, [] [Google Scholar]
  48. W.F. Sales, A.E. Diniz, A.R. Machado, Application of cutting fluids in machining processes, J. Braz. Soc. Mech. Sci., Rio deJaneiro 23 (2001), doi: 10.1590/S0100-73862001000200009 [Google Scholar]
  49. I.A. Choudhury, M.A. El-Baradie, Machinability of nickel – base super alloys: a general review, J. Mater. Process. Technol. 77 (1998) 278–284. [Google Scholar]
  50. K. Weinert, I. Inasaki, J. Sutherland, T. Wakabayashi, Dry machining and minimum lubrication, CIRP Ann.: Manuf. Technol. 53 (2004) 511–537. [CrossRef] [Google Scholar]
  51. C. Courbon, D. Kramar, P. Krajnik, F. Pusavec, J. Rech, J. Kopac, Investigation of machining performance in high – pressure jet assisted turning of Inconel 718. An experimental study, Int. J. Mach. Tool Manuf. 49 (2009) 1114–1125. [CrossRef] [Google Scholar]
  52. Z. Julieb, F. Andres, H. Kimf, J. Steven, Design of hard water stable emulsifier systems for petroleum and bio-based semi-synthetic metalworking fluids, Environ. Sci. Technol. 37 (2003) 5278–5288. [CrossRef] [Google Scholar]
  53. Kline & Company, Inc., Competitive intelligence for the global lubricants industry, 2004–2014. Kline & Company, Inc., 2006. [Google Scholar]
  54. H.S. Abdalla, W. Baines, G. McIntyre, C. Slade, Development of novel sustainable neat-oil metalworking fluids for stainless steel and titanium alloy machining. Part 1. Formulation development, J. Adv. Manuf. Technol. 34 (2007) 21–33. [CrossRef] [Google Scholar]
  55. E.O. Bennett, Water based cutting fluids and human health, Tribol. Int. 16 (1983) 133–136. [CrossRef] [Google Scholar]
  56. HSE, Health surveillance of occupational skin diseases, HSE Books, MS 24, London, 1991. [Google Scholar]
  57. HSE, Medical aspects of occupational asthma, HSE Books, MS 25, London, 1991. [Google Scholar]
  58. HSE, Health risks from metalworking fluids – aspects of good machine design, IND (G) 167L, HSE Books, London, 1994. [Google Scholar]
  59. HSE, Metalworking fluids (MWFs) exposure assessment, EH74/4, HSE Books, London, 2000. [Google Scholar]
  60. V.M. Korde, T.J. Phelps, P.R. Bienkowski, D.C. White, Biodegradation of chlorinated aliphatics and aromatic compounds in total-recycle expanded-bed reactors, Appl. Biochem. Biotechnol. 45/46 (1993) 731–740. [Google Scholar]
  61. A. Zeman, A. Sprengel, D. Niedermeier, M. Spath, Biodegradable lubricants – studies on thermooxidation of metal – working fluids by differential scanning calorimetry (DSC), Thermoch. Acta 268 (1995) 9–15. [CrossRef] [Google Scholar]
  62. P. Loredana, P. Cosmina, B. Geza, V. Gabriela, N. Remus, Basestock oils for lubricants from mixtures of corn oil and synthetic diesters, J. Am. Oil Chem. Soc. 85 (2008) 71–76. [CrossRef] [Google Scholar]
  63. A. Birova, A. Pavloviova, J. Cvengro, Lubricating oils based on chemically modified vegetable oils, J. Synth. Lubr. 18 (2002) 291. [CrossRef] [Google Scholar]
  64. A.L. Bisio, M. Xanthos, How to manage plastics wastes, technology and market opportunities, Hanser Publishers, NY, 1995. [Google Scholar]
  65. F. Li, M.V. Hanson, R.C. Larrock, Soybean oil-divinylbenzene thermosetting polymers, synthesis, structure, properties and their relationships, Polymer 42 (2001) 1567–1579. [CrossRef] [Google Scholar]
  66. H.F. Eichenberger, Biodegradable hydraulic lubricant – an overview of current developments in Central Europe. Paper No-910062, 1991. [Google Scholar]
  67. C. Busch, W. Backe, Development and investigation in biodegradable hydraulic fluids, SAE Technical Paper 932450, SAE, Warrendale, PA, 1993. [Google Scholar]
  68. F.J. Flider, Use of rapeseed oil in lubricants, INFORM 6 (1995) 1031–1035. [Google Scholar]
  69. A.A. Wessol, Bill Whitacre, Operating hydraulics in “Green” fluids, Machine Design (Jan 22, 1993), pp. 73–77. [Google Scholar]
  70. R. Gapinski, I. Joseph, B. Layzell, Vegetable oil based tractor lubricant, Off – Highway Engineering (December, 1994) 7–10. [Google Scholar]
  71. M.A. El Baradie, Cutting fluids, Part I: Characterisation, J. Mater Process. Technol. 56 (1996) 786–797. [CrossRef] [Google Scholar]
  72. G. Avuncan, Machining economy and cutting tools, Makine Takim Endustrisi Ltd, Publication, Istanbul, 1998, pp. 375–403 (in Turkish). [Google Scholar]
  73. I. Kavuncu, Cutting oils in metal machining, Turkish Chambers of Mechanical Engineers Publication, Istanbul (in Turkish). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.