Open Access
Manufacturing Rev.
Volume 1, 2014
Article Number 10
Number of page(s) 12
Published online 08 September 2014
  1. ACEA – European Automobile Manufacturers’ Association (2012), accessed in August 2013. [Google Scholar]
  2. SelectUSA (2013), accessed in July 2013. [Google Scholar]
  3. Jama – Japan Automobile Manufacturers Association (2012), accessed in July 2013. [Google Scholar]
  4. KPMG (2013), accessed in July 2013. [Google Scholar]
  5. APCO (2010), accessed in July 2013. [Google Scholar]
  6. W. Rohroff (2011), accessed in November 2013. [Google Scholar]
  7. B. Nunes, Journal of Manufacturing Technology Management 19 (2008) 8. [Google Scholar]
  8. J. Kurfer, M. Westermeier, C. Tammer, G. Reinhart, CIRP Annals – Manufacturing Technology 61 (2012) 1. [CrossRef] [Google Scholar]
  9. K.-J. Lee, G.-H. Kim, K. Smith (2010), accessed in August 2013. [Google Scholar]
  10. A. Thielmann, R. Isenmann, M. Wietschel (2010), accessed in September 2013. [Google Scholar]
  11. A. Menn (2014) [Google Scholar]
  12. K. Amine, J. Lu, A. Abouimrane, H. Wu, Z. Zhang, P. Du, I. Belharouak, J. Yang, Y.K. Sun, L. Curtiss, Argonne National Laboratory, 2012, [Google Scholar]
  13. P. Yi, L. Peng, L. Feng, P. Gan, X. Lai, Journal of Power Sources 195 (2010) 20, [Google Scholar]
  14. US Department of Energy (DOE) (2009), accessed in July 2013. [Google Scholar]
  15. US Department of Energy (DOE) (2011), accessed in August 2013. [Google Scholar]
  16. Y. Wang, K.S. Chen, J. Mishler, S.C. Cho, X.C. Adroher, Applied Energy 88 (2011) 4. [Google Scholar]
  17. S. Karimi, N. Fraser, B. Roberts, F.R. Foulkes, Advances in Materials Science and Engineering 2012 (2012). [CrossRef] [Google Scholar]
  18. L. Peng, X. Lai, P. Yi, J. Mai, J. Ni, Transactions of the ASME: Journal of Fuel Cell Science and Technology 8 (2011) 1. [Google Scholar]
  19. Y. Yu, H. Li, H. Wang, X.-Z. Yuan, G. Wang, M. Pan, Journal of Power Sources 205 (2012). [Google Scholar]
  20. Z.-B. Wang, P.-J. Zuo, Y.-Y. Chu, Y.-Y. Shao, G.-P. Yin, International Journal of Hydrogen Energy 34 (2009) 10. [Google Scholar]
  21. R.A. Antunes, M.C.L. Oliveira, G. Ett, V. Ett, International Journal of Hydrogen Energy 35 (2010) 8. [CrossRef] [Google Scholar]
  22. P. Yi, L. Peng, T. Zhou, H. Wu, X. Lai, International Journal of Hydrogen Energy 38 (2013) 3. [Google Scholar]
  23. Fuel Cell Today, D. Carter, M. Ryan, J. Wing (2012), accessed in July 2013. [Google Scholar]
  24. Fuel Cell Partnership (2012), California, accessed in August 2013. [Google Scholar]
  25. National Energy Administration of China (2012), accessed in July 2014. [Google Scholar]
  26. Fuel Cell Europe (2010), accessed in August 2013. [Google Scholar]
  27. WorldAutoSteel (2011), accessed in November 2013. [Google Scholar]
  28. Advanced Manufacturing Portal,, accessed in July 2014. [Google Scholar]
  29. USDrive (2013), accessed in December 2013. [Google Scholar]
  30. NanoSteel,, accessed in July 2014. [Google Scholar]
  31. M. Chlipala, S. Stockey, M. Hirtler, V. Schulze, G. Lanza, Proceedings of the 14th international conference of the european society for precision engineering and nanotechnology (2014) pp. 170–173. [Google Scholar]
  32. J. Fleischer, A. Ochs, S. Dosch, in New Developments in Sheet Metal Forming: Papers of the International Conference on Developments in Sheet Metal Forming M. Liewald (Ed.), MAT INFO Werkstoff-Informationsgesellschaft, Stuttgart, 2012. [Google Scholar]
  33. G. Davies, Materials for Automobile Bodies, Elsevier, Oxford, 2012. [Google Scholar]
  34. McKinsey & Company (2012), accessed in April 2014. [Google Scholar]
  35. Fraunhofer Institute for Chemical Technology (2013), accessed in August 2013. [Google Scholar]
  36. J. Fleischer, A. Ochs, S.-F. Koch, in Technologies and Systems for Assembly Quality, Productivity and Customization, Proceedings of the 4th CIRP Conference on Assembly Technologies and Systems, Ann Arbor, Michigan, 2012, S.J. Hu (Ed.), CIRP, Ann Arbor Michigan, 2012, p. 7. [Google Scholar]
  37. W. Hufenbach (2013), accessed in November 2013. [Google Scholar]
  38. Automotive Council Technology Group (2013), accessed in December 2013. [Google Scholar]
  39. L. Mortara, J. Hughes, P.S. Ramsundar, F. Livesey, D. Probert, Rapid Prototyping Journal (2009). [Google Scholar]
  40. European Technology Platform Photonics21 (2013), accessed in December 2013. [Google Scholar]
  41. T. Rockstroh, D. Abbott, K. Hix, J. Mook, Industrial Lasers (2013), accessed in July 2014. [Google Scholar]
  42. C. Emmelmann, D. Herzog, J. Kranz, C. Klahn, M. Munsch, Industrie Management (2013) 2. [Google Scholar]
  43. L.E. Murr, S.M. Gaytan, D.A. Ramirez, E. Martinez, J. Hernandez, K.N. Amato, P.W. Shindo, F.R. Medina, R.B. Wicker, Journal of Materials Science & Technology 28 (2012) 1. [CrossRef] [Google Scholar]
  44. Roland Berger Strategy Consultants (2013), accessed in April 2014. [Google Scholar]
  45. Advanced Manufacturing Portal,, accessed in July 2014. [Google Scholar]
  46. Direct Manufacturing Research Center,, accessed in July 2014. [Google Scholar]
  47. Diginova (EU Project, FP7) (2014), accessed in July 2014. [Google Scholar]
  48. Volkswagen, Industrial Robot: An International Journal (2006) 30. [Google Scholar]
  49. S. Makris, G. Michalos, G. Chryssolouris, Robotics and Computer-Integrated Manufacturing 28 (2012) 3. [CrossRef] [Google Scholar]
  50. J. Fleischer, J. Schaedel, CIRP Journal of Manufacturing Science and Technology 6 (2013) 2. [CrossRef] [Google Scholar]
  51. J.-E. Gans, G. Lanza, R. Müller, S. Peters, L. Schoen, wt Werkstattstechnik online (2011) 3. [Google Scholar]
  52. T. Bauernhansl, interaktiv – Fraunhofer IPA (2012) 2. [Google Scholar]
  53. S. Nördinger, Produktion (2013) accessed in July 2014. [Google Scholar]
  54. X. Jin, S.J. Hu, J. Ni, G. Xiao, IEEE Transactions on Automation Science and Engineering 10 (2013) 1. [CrossRef] [Google Scholar]
  55. X. Jin, J. Ni, Y. Koren, CIRP Annals – Manufacturing Technology 60 (2011) 1. [CrossRef] [Google Scholar]
  56. R.T. Lund, Technology Review 87 (1984) 2. [Google Scholar]
  57. M.E. Ferguson, in Closed-loop supply chains: new developments to improve the sustainability of business practices, M.E. Ferguson, G.C. Souza (Eds.), CRC Press, Boca Raton, Florida 2010. [Google Scholar]
  58. A. Brusaferri, M. Colledani, G. Copani, N. Pedrocchi, M. Sacco, T. Tolio, The 10th Global Conference on Sustainable Manufacturing – Towards Implementing Sustainable Manufacturing, Istanbul, 2012, p. 332. [Google Scholar]
  59. V.D.R. Guide, J. Li, Decision Sciences 41 (2010) 3. [Google Scholar]
  60. J. Gerrard, M. Kandlikar, Journal of Cleaner Production 15 (2007) 1. [CrossRef] [Google Scholar]
  61. D. Froelich, E. Maris, N. Haoues, L. Chemineau, H. Renard, F. Abraham, R. Lassartesses, Minerals Engineering 20 (2007) 9. [Google Scholar]
  62. N. Perry, A. Bernard, F. Laroche, S. Pompidou, CIRP Annals – Manufacturing Technology 61 (2012) 1. [CrossRef] [Google Scholar]
  63. G. Lanza, D. Appel, in Symposium Proceedings International Applied Reliability Symposium – Europe 2012, ReliaSoft Corporation (Ed.), p. 1. [Google Scholar]
  64. J. Ni, X. Jin, CIRP Annals – Manufacturing Technology 61 (2012) 1. [CrossRef] [Google Scholar]
  65. Y. Koren, The Global Manufacturing Revolution: Product-Process-Business Integration and Reconfigurable Systems, John Wiley & Sons, Hoboken, New Jersey, 2010. [Google Scholar]
  66. M. Colledani, M. Ekvall, T. Lundholm, P. Moriggi, A. Polato, T. Tolio, International Journal of Production Research 48 (2010) 7. [CrossRef] [Google Scholar]
  67. M. Colledani, T. Tolio, CIRP Annals – Manufacturing Technology (2012) 61, 1. [CrossRef] [Google Scholar]
  68. J. Fleischer, G. Lanza, K. Peter, Quantified Interdependencies between Lean Methods and Production Figures in the Small Series Production, in Conference Proceedings MS 2008, 41st CIRP Conference on Manufacturing Systems, 26.05.2008–28.05.2008, Tokyo, Japan, pp. 89–92. [Google Scholar]
  69. Acatech,, accessed in July 2014. [Google Scholar]
  70. Deutsche Bank Research,, accessed in July 2014. [Google Scholar]
  71. Advanced Manufacturing Portal,, accessed in July 2014. [Google Scholar]
  72. G. Lanza, N. Stricker, S. Peters, Procedia CIRP (2013) 7. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.