Open Access
Review
Issue
Manufacturing Rev.
Volume 1, 2014
Article Number 20
Number of page(s) 17
DOI https://doi.org/10.1051/mfreview/2014019
Published online 18 December 2014
  1. S. Veprek, Journal of Vacuum Science & Technology A 17 (1999) 2401–2420 and J. Vac. Sci. Technol. A 31 (2013) 050822-1. [CrossRef] [Google Scholar]
  2. K. Holmberg, A. Mathews, in: Coatings Tribology, 2nd edition by B.J. Briscoe, Elsevier. [Google Scholar]
  3. K. Bobzin, N. Bagcivan, A. Reinholdt, M. Ewering, Surface and Coatings Technology 205 (2010) 1444–1448. [CrossRef] [Google Scholar]
  4. G.S. Fox-Rabinovich, A.I. Kovalev, J.L. Endrino, S.C. Veldhuis, L.S. Shuster, I.S. Gershman,, in: G.S. Fox-Rabinovich, G. Totten (Eds.), Chapter 9 Surface-Engineered Tool Materials for High-Performance Machining, Taylor and Francis Books/CRC Press LLC, USA, 2007. [Google Scholar]
  5. G.S. Fox-Rabinovich, J.L. Endrino, B.D. Beake, A.I. Kovalev, S.C. Veldhuis, L. Ning, F. Fontaine, A. Gray, Surface and Coatings Technology 201 (2006) 3524–3529. [CrossRef] [Google Scholar]
  6. L. Hultman, Vacuum 57 (2000) 1–30. [CrossRef] [Google Scholar]
  7. G.G. Fuentes, D. Caceres, I. Vergara, E. Elizalde, J.M. Sanz, Surface and Coatings Technology 151–152 (2002) 365. [CrossRef] [Google Scholar]
  8. S.J. Bull, D.G. Bhat, M.H. Staia, Surface and Coatings Technology 163–164 (2003) 507–514. [CrossRef] [Google Scholar]
  9. S. PalDey, S.C. Deevi, Material Science and Engineering A 342 (2003) 58–79. [CrossRef] [Google Scholar]
  10. G.G. Fuentes, R. Rodriguez, J.C. Avelar-Batista, J. Housden, F. Montalá, L.J. Carreras, A.B. Cristóbal, J.J. Damborenea, T.J. Tate, Journal of Materials Processing Technology 167 (2005) 415. [CrossRef] [Google Scholar]
  11. T. Polcar, R. Martinez, T. Vítů, L. Kopecký, R. Rodriguez, A. Cavaleiro, Surface and Coatings Technology 203 (2009) 3254–3259. [CrossRef] [Google Scholar]
  12. G.G. Fuentes, M.J. Diaz de Cerio, A. García, R. Martínez, R. Bueno, R.J. Rodríguez, M. Rico, F. Montalá, Yi. Qin, Surface and Coatings Technology 203 (2008) 670–674. [CrossRef] [Google Scholar]
  13. W. Kalss, A. Reiter, V. Derflinger, C. Gey, J.L. Endrino, International Journal of Refractory Metals and Hard Materials 24 (2006) 399–404. [CrossRef] [Google Scholar]
  14. R.J. Rodríguez, J.A. García, R. Martínez, B. Lerga, M. Rico, G.G. Fuentes, A. Guette, C. Labruguere, M. Lahaye, Applied Surface Science 235 (2004) 53–59. [CrossRef] [Google Scholar]
  15. S. Carrera, O. Salas, J.J. Moore, Surface and Coatings Technology 167 (2003) 25–32. [CrossRef] [Google Scholar]
  16. Rointan F. Bunshah (Ed.), Handbook of hard coatings, Deposition Technologies, Properties and Applications, William Andrew Publishing, LCC, 2001, ISBN: 0-8155-1438-7. [Google Scholar]
  17. J. Musil, H. Hrubý, Thin Solid Films 365 (2000) 104–109. [CrossRef] [Google Scholar]
  18. A. Hörling, L. Hultman, M. Odén, J. Sjölén, L. Karlsson, Journal of Vacuum Science & Technology A20 (2002) 1815–1823. [CrossRef] [Google Scholar]
  19. Z. Ding, C.T. Bui, X.T. Zeng, Surface and Coatings Technology 203 (2008) 680–684. [CrossRef] [Google Scholar]
  20. E. Ribeiro, L. Rebouta, S. Carvalho, F. Vaz, G.G. Fuentes, R. Rodriguez, M. Zazpe, E. Alves, Ph. Goudeau, J.P. Riviere, Surface and Coatings Technology 188–189 (2004) 351. [CrossRef] [Google Scholar]
  21. H. Scheerer, T.H. Hoche, E. Broszeit, B. Schramm, E. Abele, C. Berger, Surface and Coatings Technology 200 (2005) 203–207. [CrossRef] [Google Scholar]
  22. J.L. Endrino, V. Derflinger, Surface and Coatings Technology 200 (2005) 988–992. [CrossRef] [Google Scholar]
  23. S.-Y. Lee, Yeh-Sun Hong, Surface and Coatings Technology 202 (2007) 1129–1134. [CrossRef] [Google Scholar]
  24. M.G. Faga, G. Gautier, R. Calzavarini, M. Perucca, E. Aimo Boot, F. Cartasegna, L. Settineri, Wear 263 (2007) 1306–1314. [CrossRef] [Google Scholar]
  25. S.K. Kim, P.V. Vinh, J.H. Kim, T. Ngoc, Surface and Coatings Technology 200 (2005) 1391–1394. [CrossRef] [Google Scholar]
  26. A. Flink, J.M. Andersson, B. Alling, R. Daniel, J. Sjölén, L. Karlsson, L. Hultman, Thin Solid Films 517 (2008) 714–721. [CrossRef] [Google Scholar]
  27. J.L. Endrino, S. Palacín, M.H. Aguirre, A. Gutiérrez, F. Schäfers, Acta Materialia 55 (2007) 2129–2135. [CrossRef] [Google Scholar]
  28. D. Rafaja, M. Dopita, M. Růžička, V. Klemm, D. Heger, G. Schreiber, M. Šíma, Surface and Coatings Technology 201 (2006) 2835–2843. [CrossRef] [Google Scholar]
  29. A.A. Voevodin, S.D. Walck, J.S. Zabinski, Wear 203 (1997) 516–527. [CrossRef] [Google Scholar]
  30. K. Holmberg, A. Matthews, H. Ronkainen, Tribology International 31 (1998) 107–120. [CrossRef] [Google Scholar]
  31. M. Stueber, H. Holleck, H. Leiste, K. Seemann, S. Ulrich, C. Ziebert, Journal of Alloys and Compounds 483 (2009) 321–333. [CrossRef] [Google Scholar]
  32. M. Diserens, J. Patsheider, F. Lévy, Surface and Coatings Technology 108–109 (1998) 241–246. [CrossRef] [Google Scholar]
  33. F. Vaz, L. Rebouta, S. Ramos, M.F. da Silva, J.C. Soares, Surface and Coatings Technology 108–109 (1998) 236–240. [CrossRef] [Google Scholar]
  34. G.G. Fuentes, E. Almandoz, R. Pierrugues, R. Martínez, R.J. Rodríguez, J. Caro, M. Vilaseca, Surface and Coatings Technology 205 (2010) 1368–1373. [CrossRef] [Google Scholar]
  35. J. Böhlmark, Fundamentals of High Power Impulse Magnetron Sputtering, Dissertation No. 1014, Linköping Institute of Technology, Sweden. [Google Scholar]
  36. J. Chen, X.Y. Li, R. Ji, R. Khan, G. Fuentes, Surface Engineering 29 (2013) 462–467. [CrossRef] [Google Scholar]
  37. R. Hoya, J.-D. Kammingaa, G.C.A.M. Janssen, Surface and Coatings Technology 200 (2006) 3856–3860. [CrossRef] [Google Scholar]
  38. J.C. Avelar-Batista, E. Spain, G.G. Fuentes, A. Sola, R. Rodriguez, J. Housden, Surface and Coatings Technology 201 (2006) 4335–4340. [CrossRef] [Google Scholar]
  39. J. Lin, S. Carrera, A.O. Kunrath, D. Zhong, S. Myers, B. Mishra, P. Ried, J.J. Moore, Surface and Coatings Technology 201 (2006) 2930–2941. [CrossRef] [Google Scholar]
  40. A. Persson, S. Hogmark, J. Bergström, Surface and Coatings Technology 191 (2005) 216–227. [CrossRef] [Google Scholar]
  41. X. Ma, K. Yukimura, Surface and Coatings Technology 186 (2004) 88–92. [CrossRef] [Google Scholar]
  42. G.G. Fuentes, P. Prieto, C. Morant, C. Quirós, R. Núñez, E. Elizalde, J.M. Sanz, Physical Review B 63 (2001) 075403. [CrossRef] [Google Scholar]
  43. G.G. Fuentes, E. Elizalde, J.M. Sanz, Journal of Applied Physics 90 (2001) 2737. [CrossRef] [Google Scholar]
  44. P.H. Mayrhofer, C. Mitterer, L. Hultman, H. Clemens, Progress in Materials Science 51 (2006) 1032–1114. [CrossRef] [Google Scholar]
  45. P.H. Mayrhofer, C. Mitterer, H. Clemens, Advanced Engineering Materials 7 (2005) 1071–1082. [CrossRef] [Google Scholar]
  46. P.H. Mayrhofer, F.D. Fischer, H.J. Böhm, C. Mitterer, J.M. Schneider, Acta Materialia 55 (2007) 1441–1446. [CrossRef] [Google Scholar]
  47. X.-Z. Ding, X.T. Zeng, Y.C. Liu, Thin Solid Films 519 (2011) 1894–1900. [CrossRef] [Google Scholar]
  48. S. Zhang, L. Wang, Q. Wang, M. Li, Surface and Coatings Technology 214 (2013) 160–167. [CrossRef] [Google Scholar]
  49. Y.-Y. Chang, C.-P. Chang, D.-Y. Wang, S.-M. Yang, W. Wu, Journal of Alloys and Compounds 461 (2008) 336–341. [CrossRef] [Google Scholar]
  50. S.B. Won, M.J. Kim, C.Y. Xu, Y.S. Hwang, D.B. Lee, Advanced Materials Research 69 (2013) 612–615. [CrossRef] [Google Scholar]
  51. J. Martan, P. Benes, Thermochimica Acta 539 (2012) 51–55. [CrossRef] [Google Scholar]
  52. D. Jianxin, L. Aihua, International Journal of Refractory Metals and Hard Materials 41 (2013) 241–249. [CrossRef] [Google Scholar]
  53. K. Kutschej, P.H. Mayrhofer, M. Kathrein, P. Polcik, R. Tessadri, C. Mitterer, Surface and Coatings Technology 200 (2005) 2358–2365. [CrossRef] [Google Scholar]
  54. K. Kutschej, T.N. Fateh, P.H. Mayrhofer, M. Kathrein, P. Polcik, C. Mitterer, Surface and Coatings Technology 200 (2005) 113–117. [CrossRef] [Google Scholar]
  55. J.C. Walker, I.M. Ross, C. Reinhard, W.M. Rainforth, P.Eh. Hovsepian, Wear 267 (2009) 965–975. [CrossRef] [Google Scholar]
  56. P.Eh. Hovsepian, D.B. Lewis, Q. Luo, W.-D. Münza, P.H. Mayrhofer, C. Mitterer, Z. Zhou, W.M. Rainforth, Thin Solid Films 485 (2005) 160–168. [CrossRef] [Google Scholar]
  57. T. Polcar, T. Vitu, J. Sondor, A. Cavaleiro, Plasma Processes and Polymers 6 (2009) S935–S940. [CrossRef] [Google Scholar]
  58. T. Polcar, A. Cavaleiro, Surface and Coatings Technology 206 (2011) 1244–1251. [CrossRef] [Google Scholar]
  59. Z. Zhou, W.M. Rainforth, Q. Luo, P.Eh. Hovsepian, J.J. Ojeda, M.E. Romero-Gonzalez, Acta Materialia 58 (2010) 2912–2925. [CrossRef] [Google Scholar]
  60. S.M. Aouadi, D.P. Singh, D.S. Stone, K. Polychronopoulou, F. Nahif, C. Rebholz, C. Muratore, A.A. Voevodin, Acta Materialia 58 (2010) 5326–5331. [CrossRef] [Google Scholar]
  61. N. Fateh, G.A. Fontalvo, G. Gassner, C. Mitterer, Wear 262 (2007) 1152–1158. [CrossRef] [Google Scholar]
  62. R. Franz, C. Mitterer, Surface and Coatings Technology 228 (2013) 1–13. [CrossRef] [Google Scholar]
  63. K. Kutschej, P.H. Mayrhofer, M. Kathrein, P. Polcik, C. Mitterer, Surface and Coatings Technology 188–189 (2004) 358–363. [CrossRef] [Google Scholar]
  64. K. Bobzin, N. Bagcivan, M. Ewering, R.H. Brugnara, S. Theiß, Surface and Coatings Technology 205 (2011) 2887–2892. [CrossRef] [Google Scholar]
  65. C. Muratore, J.J. Hu, A.A. Voevodin, Thin Solid Films 515 (2007) 3638–3643. [CrossRef] [Google Scholar]
  66. D.S. Stone, S. Harbin, H. Mohseni, J.-E. Mogonye, T.W. Scharf, C. Muratore, A.A. Voevodin, A. Martini, S.M. Aouadi, Surface and Coatings Technology 217 (2013) 140–146. [CrossRef] [Google Scholar]
  67. J. Hardell, B. Prakash, International Journal of Refractory Metals and Hard Materials 28 (2010) 106–114. [CrossRef] [Google Scholar]
  68. J.C. Sánchez-López, A. Contreras, S. Domínguez-Meister, A. García-Luis, M. Brizuela, Thin Solid Films 550 (2014) 413–420. [CrossRef] [Google Scholar]
  69. M.H. Staia, M. D’Alessandria, D.T. Quinto, F. Roudet, M. Marsal Astort, Journal of Physics Condensed Matter 18 (2006) S1727–S1736. [CrossRef] [Google Scholar]
  70. Z.B. Qi, P. Sun, F.P. Zhu, Z.T. Wu, B. Liu, Z.C. Wang, D.L. Peng, C.H. Wu, Surface and Coatings Technology 231 (2013) 267–272. [CrossRef] [Google Scholar]
  71. B. Podgornik, S. Hogmark, J. Pezdirnik, Wear 257 (2004) 843–851. [CrossRef] [Google Scholar]
  72. J. Smolik, M. Gulde, J. Walkowicz, J. Suchanek, Surface and Coatings Technology 180–181 (2004) 506–511. [CrossRef] [Google Scholar]
  73. A. Srivastava, V. Joshi, R. Shivpuri, R. Bhattacharya, S. Dixit, Surface and Coatings Technology 163–164 (2003) 631–636. [CrossRef] [Google Scholar]
  74. M. Pellizzari, Wear 271 (2011) 2089–2099. [CrossRef] [Google Scholar]
  75. S. Yul Lee, Surface and Coatings Technology 193 (2005) 55–59. [CrossRef] [Google Scholar]
  76. K.S. Klimek, H. Ahn, I. Seebach, M. Wang, K.-T. Rie, Surface and Coatings Technology 174–175 (2003) 677–680. [CrossRef] [Google Scholar]
  77. L. Pelcastre, J. Hardell, B. Prakash, Tribology International 67 (2013) 263–271. [CrossRef] [Google Scholar]
  78. E. Konca, Y.-T. Cheng, A.M. Weiner, J.M. Dasch, A. Erdemir, A.T. Alpas, Surface and Coatings Technology 200 (2005) 2260–2270. [CrossRef] [Google Scholar]
  79. Y. Birol, B. Yuksel, Surface and Coatings Technology 207 (2012) 461–466. [CrossRef] [Google Scholar]
  80. T. Björk, M. Berger, R. Westergard, S. Hogmark, J. Bergström, Surface and Coatings Technology 146–147 (2001) 33–41. [CrossRef] [Google Scholar]
  81. M. Witthaut, R. Cremer, K. Reichert, D. Neuschütz, Microchimica Acta 133 (2000) 191. [CrossRef] [Google Scholar]
  82. J. Ramm, M. Ante, T. Bachmann, B. Widrig, H. Brändle, M. Döbeli, Surface and Coatings Technology 202 (2007) 876–883. [CrossRef] [Google Scholar]
  83. H. Najafi, A. Karimi, P. Dessarzin, M. Morstein, Surface and Coatings Technology 214 (2013) 46–52. [CrossRef] [Google Scholar]
  84. X.P. Xiu, A. Needleman, Journal of Mechanics and Physics of Solid 42 (1994) 1397–1434. [CrossRef] [Google Scholar]
  85. J. Feng, Y. Qin, Q. Zeng, E. Almandoz, G. Fuentes, R.R. Koodakal, J. Michler, Journal of Multiscale Modelling 3 (2011) 1–22. [CrossRef] [Google Scholar]
  86. J. Feng, Y. Qin, R.R. Koodakal, J. Michler, Submitted to the Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture (2012) accepted for publication. [Google Scholar]
  87. D. Yin, X. Peng, Y. Qin, Z. Wang, Journal of Multiscale Modelling 3 (2011) 65–78. [CrossRef] [Google Scholar]
  88. M. Sokovic, P. Panjan, M. Cekada, International Journal of Microstructure and Materials Properties 1 (2006) 231. [CrossRef] [Google Scholar]
  89. P. Panjan, I. Urankar, B. Navinsek, M. Tercelj, R. Turk, M. Cekada, V. Leskovsek, Surface and Coatings Technology 151–152 (2002) 505–509. [CrossRef] [Google Scholar]
  90. K.B. Müller, Journal of Materials Processing Technology 130–131 (2002) 432–437. [CrossRef] [Google Scholar]
  91. B. Navinsek, P. Panjan, I. Urankar, P. Cvahte, F. Gorenjak, Surface and Coatings Technology 142–144 (2001) 1148–1154. [CrossRef] [Google Scholar]
  92. M. Pellizzari, M. Zadra, A. Molinari, Surface Engineering 23 (2007) 165–168. [CrossRef] [Google Scholar]
  93. C. Mitterer, F. Holler, F. Üstel, D. Heim, Surface and Coatings Technology 125 (2000) 233–239. [CrossRef] [Google Scholar]
  94. H. Holleck, Surface and Coatings Technology 36 (1988) 151–159. [CrossRef] [Google Scholar]
  95. M. Stüber, U. Alberts, H. Leiste, S. Ulrigh, H. Holleck, P.B. Barna, A. Kovacs, P.Eh. Hovsepian, I. Gee, Surface and Coatings Technology 200 (2006) 6162–6171. [CrossRef] [Google Scholar]
  96. C. Ziebert, U. Albers, M. Stüber, S. Ulrich, Plasma Processes and Polymers 6 (2009) S560–S565. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.