Modelling of additive manufacturing processes: a review and classification
Manufacturing Rev., 5 (2018) 2
Published online: 2018-03-16
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Automated design of self-supporting additive manufactured parts via integrated support structures
Patrick Beutler, Joël Roth and Mirko MeboldtRapid Prototyping Journal 32 (6) 1467 (2026)
https://doi.org/10.1108/RPJ-03-2025-0124
Estimation of arithmetical mean roughness using a regression approach and computer vision in stainless steel specimens manufactured by additive manufacturing
Francisco Jáñez-Martino, Eduardo Fidalgo, Susana Martínez-Pellitero, Sara Giganto and Enrique AlegreInternational Journal of Computer Integrated Manufacturing 39 (6) 813 (2026)
https://doi.org/10.1080/0951192X.2025.2498081
221 (2026)
https://doi.org/10.1007/978-3-032-14628-1_25
3 (2026)
https://doi.org/10.1016/B978-0-443-29998-8.00002-7
Influence of PBF-LB process parameters on the properties of polymer-based composite materials
Ana C. Lopes, Beatriz M. Fernandes and António J. PontesThe International Journal of Advanced Manufacturing Technology 144 (12) 8003 (2026)
https://doi.org/10.1007/s00170-026-18340-x
A review of current research and prospects of fused deposition modelling: application, materials, performance, process variables, parameter optimization, and numerical study
Yitayal Belew Siyoum, Fikir Gashaw Kindie and Mebratu Assefa GebeyehuThe International Journal of Advanced Manufacturing Technology 138 (5-6) 1675 (2025)
https://doi.org/10.1007/s00170-025-15615-7
Physically derived instantaneous modelling of complex current-voltage waveform-controlled arc-wire DED process—residual stress and distortion analysis
Pradeep Nagaraj, Saravana Kumar Gurunathan and Murugaiyan AmirthalingamThe International Journal of Advanced Manufacturing Technology 138 (2) 687 (2025)
https://doi.org/10.1007/s00170-025-15547-2
Adopting additive manufacturing: spotlight on sustainability and material utilization
Upender Punia, Sachin Dhull, Asad Habeeb, Ekta Antil, Deepak Dahiya, Deepak Gupta and Akash AhlawatGreen Materials 13 (4) 234 (2025)
https://doi.org/10.1680/jgrma.24.00165
Current Applications of Machine Learning in Additive Manufacturing: A Review on Challenges and Future Trends
Govind Vashishtha, Sumika Chauhan, Radoslaw Zimroz, Nitin Yadav, Rajesh Kumar and Munish Kumar GuptaArchives of Computational Methods in Engineering 32 (4) 2635 (2025)
https://doi.org/10.1007/s11831-024-10215-2
A long-term and pragmatic numerical simulation of wire arc additively manufactured ER70S6 and ER316L thin-wall via finite difference method
Habib Hamed Zargari, Seyyed Ahmadreza Khajeh Mohammadilar and Vahid Ziaei LalehProgress in Additive Manufacturing 10 (12) 11647 (2025)
https://doi.org/10.1007/s40964-025-01307-x
Splashing of viscous droplets on heated surfaces
Shiji Lin, Le Zhou, Longquan Chen and Zhigang LiExperiments in Fluids 66 (6) (2025)
https://doi.org/10.1007/s00348-025-04057-2
Integration of extended reality and CAE in the context of industry 4.0
Dimitris Mourtzis, John Angelopoulos and Nikos PanopoulosInternational Journal of Computer Integrated Manufacturing 38 (7) 929 (2025)
https://doi.org/10.1080/0951192X.2024.2397820
Discrete Event Simulation of a Stereolithography Production Line
Zahra Isania and Giuseppe CasalinoOperations Research Forum 6 (4) (2025)
https://doi.org/10.1007/s43069-025-00575-1
A Review of the Quality Control and Mechanical Properties in Hybrid Additive Manufacturing
Sazzad Hossain Emon and Do Sik ShimInternational Journal of Precision Engineering and Manufacturing 26 (9) 2515 (2025)
https://doi.org/10.1007/s12541-025-01329-z
TECHNOLOGY OF ADDITIVE MANUFACTURING: A COMPREHENSIVE REVIEW
Md. Imam Hossain, Md. Sakib Khan, Imrul Kayes Khan, Khan Rajib Hossain, Yanzhao He and Xiaolong WangKufa Journal of Engineering 15 (1) 108 (2024)
https://doi.org/10.30572/2018/kje/150108
200 255 (2024)
https://doi.org/10.1007/978-3-031-72900-3_13
431 (2024)
https://doi.org/10.1016/B978-0-443-13924-6.00014-4
818 (2024)
https://doi.org/10.1016/B978-0-323-90800-9.00186-4
Investigation on the mechanical and thermal properties of metal-PLA composites fabricated by FDM
Osman UlkirRapid Prototyping Journal 30 (10) 2113 (2024)
https://doi.org/10.1108/RPJ-01-2024-0007
Additive Manufacturing simulations: An approach based on space partitioning and dynamic 3D mesh adaptation
Panagis Foteinopoulos, Alexios Papacharalampopoulos and Panagiotis StavropoulosAdditive Manufacturing Letters 100256 (2024)
https://doi.org/10.1016/j.addlet.2024.100256
Ultimate flexural strength and Young’s modulus analysis of denture base resins for masked stereolithography 3D printing technology
P. PenchevArchives of Materials Science and Engineering 125 (2) (2024)
https://doi.org/10.5604/01.3001.0054.6753
Choosing between additive and conventional manufacturing of spare parts: on the impact of failure rate uncertainties and the tools to reduce them
Mirco Peron, Antonio Maria Coruzzolo, Rob Basten, Nils Knofius, Francesco Lolli and Fabio SgarbossaInternational Journal of Production Economics 109438 (2024)
https://doi.org/10.1016/j.ijpe.2024.109438
Laser Polishing of Directed Energy Deposition Metal Parts: A Review
Baosheng Guan, Lanyun Qin, Guang Yang, Yuhang Ren and Xiangming WangAdditive Manufacturing Frontiers 200174 (2024)
https://doi.org/10.1016/j.amf.2024.200174
339 (2023)
https://doi.org/10.1007/978-3-031-33890-8_31
Geometric Accuracy of Components Manufactured by SLS Technology Regarding the Orientation of the Model during 3D Printing
Miroslav Matuš, Vladimír Bechný, Richard Joch, Mário Drbúl, Jozef Holubják, Andrej Czán, Martin Novák and Michal ŠajgalíkManufacturing Technology 23 (2) 233 (2023)
https://doi.org/10.21062/mft.2023.027
Thermoplastic polyurethane for three‐dimensional printing applications: A review
Shubham M. Desai, Rushikesh Y. Sonawane and Aarti P. MorePolymers for Advanced Technologies 34 (7) 2061 (2023)
https://doi.org/10.1002/pat.6041
Additively manufactured materials and structures: A state-of-the-art review on their mechanical characteristics and energy absorption
Yaozhong Wu, Jianguang Fang, Chi Wu, Cunyi Li, Guangyong Sun and Qing LiInternational Journal of Mechanical Sciences 246 108102 (2023)
https://doi.org/10.1016/j.ijmecsci.2023.108102
311 (2023)
https://doi.org/10.1007/978-3-031-28839-5_35
Digitally designed casting ring and sprue system - a contemporary approach to the casting process in dentistry
P. PenchevArchives of Materials Science and Engineering 119 (1) 31 (2023)
https://doi.org/10.5604/01.3001.0016.3151
CRIAÇÃO DE ARTEFATO POKA YOKE POR IMPRESSÃO 3D PARA INSPEÇÃO DO DIÂMETRO AO LONGO DO COMPRIMENTO DO TUBOS DE SEÇÃO CIRCULAR
Leandro Antunes Dias and Antonio César GalhardiREVISTA FOCO 16 (02) e1040 (2023)
https://doi.org/10.54751/revistafoco.v16n2-133
An Evolutive-Deformation approach to enhance self-supporting areas in Additive Manufacturing designs
Jorge Jabón, Sergio Corbera, Rafael Barea and Javier Martín-RabadánComputers & Industrial Engineering 182 109386 (2023)
https://doi.org/10.1016/j.cie.2023.109386
Binder Jetting Additive Manufacturing: Spreading and Permeation of Multiple Micron Droplets in Porous Media
Ankai Hu, Yanlu Huang, Zhiyi Chen, Yongqiang Yang, Yuxin Xu and Tianyu WangAdvanced Theory and Simulations 6 (2) (2023)
https://doi.org/10.1002/adts.202200747
A review on experimentally observed mechanical and microstructural characteristics of interfaces in multi-material laser powder bed fusion
Ziheng Wu, Alexander E. Wilson-Heid, R. Joey Griffiths and Eric S. EltonFrontiers in Mechanical Engineering 9 (2023)
https://doi.org/10.3389/fmech.2023.1087021
1 (2023)
https://doi.org/10.1007/978-3-031-33793-2_1
45 (2023)
https://doi.org/10.1007/978-3-031-33793-2_3
95 (2023)
https://doi.org/10.1007/978-3-031-33793-2_4
Advances in Additive Manufacturing Artificial Intelligence, Nature-Inspired, and Biomanufacturing
Anshul YadavAdvances in Additive Manufacturing Artificial Intelligence, Nature-Inspired, and Biomanufacturing 195 (2023)
https://doi.org/10.1016/B978-0-323-91834-3.00023-5
Topology optimization for metal additive manufacturing: current trends, challenges, and future outlook
Osezua Ibhadode, Zhidong Zhang, Jeffrey Sixt, Ken M. Nsiempba, Joseph Orakwe, Alexander Martinez-Marchese, Osazee Ero, Shahriar Imani Shahabad, Ali Bonakdar and Ehsan ToyserkaniVirtual and Physical Prototyping 18 (1) (2023)
https://doi.org/10.1080/17452759.2023.2181192
A decision support tool for dynamic LCA: the FDM paradigm
Alexios Papacharalampopoulos, Konstantinos Tzimanis and Panagiotis StavropoulosProcedia CIRP 112 543 (2022)
https://doi.org/10.1016/j.procir.2022.09.097
Predicting Melt Pool Dimensions for Wire-Feed Directed Energy Deposition Process
Zhening Yang, Amit K. Verma, Lonnie Smith, et al.Integrating Materials and Manufacturing Innovation 11 (4) 532 (2022)
https://doi.org/10.1007/s40192-022-00278-z
439 (2022)
https://doi.org/10.2514/5.9781624106279.0439.0526
Handbook of Research on Advancements in the Processing, Characterization, and Application of Lightweight Materials
R. Ganesh Narayanan, Perumalla Janaki Ramulu, Satheeshkumar V., et al.Advances in Chemical and Materials Engineering, Handbook of Research on Advancements in the Processing, Characterization, and Application of Lightweight Materials 216 (2022)
https://doi.org/10.4018/978-1-7998-7864-3.ch011
Thermal simulation of wire arc additive manufacturing: a new material deposition and heat input modelling
Akram Chergui, François Villeneuve, Nicolas Béraud and Frédéric VignatInternational Journal on Interactive Design and Manufacturing (IJIDeM) 16 (1) 227 (2022)
https://doi.org/10.1007/s12008-021-00824-7
Metal Additive Manufacturing for Propulsion Applications
Paul R. Gradl, Omar R. Mireles, Christopher S. Protz and Chance P. GarciaMetal Additive Manufacturing for Propulsion Applications (2022)
https://doi.org/10.2514/4.106279
Cyclic Plasticity of Metals
Radim Halama, Kyriakos Kourousis, Marek Pagáč and Zbyněk PaškaCyclic Plasticity of Metals 397 (2022)
https://doi.org/10.1016/B978-0-12-819293-1.00022-X
Impact of Additive Manufacturing on the Supply Chain of Aerospace Spare Parts Industry—A Review
Binoy Debnath, Md Shihab Shakur, Fahmida Tanjum, M. Azizur Rahman and Ziaul Haq AdnanLogistics 6 (2) 28 (2022)
https://doi.org/10.3390/logistics6020028
Computational modelling of process–structure–property–performance relationships in metal additive manufacturing: a review
Seyed Mahdi Hashemi, Soroush Parvizi, Haniyeh Baghbanijavid, et al.International Materials Reviews 67 (1) 1 (2022)
https://doi.org/10.1080/09506608.2020.1868889
Additive Manufacturing in Biomedical Applications
Hideyuki Kanematsu, Dana M. Barry, Rafiqul Noorani and Paul McGrathAdditive Manufacturing in Biomedical Applications 48 (2022)
https://doi.org/10.31399/asm.hb.v23A.a0006863
A Review- Modelling Approach and Numerical Analysis of Additive Manufacturing
Vaishnavi Kohale, Samidha Jawade and Ganesh KakandikarJournal of Engineering Research and Sciences 1 (3) 116 (2022)
https://doi.org/10.55708/js0103012
1 (2022)
https://doi.org/10.1002/9783527815562.mme0055
Optimization of Thermal Modeling Using Machine Learning Techniques in Fused Deposition Modeling 3-D Printing
Koray Özsoy, Bekir Aksoy and Hilmi Cenk BayrakçıJournal of Testing and Evaluation 50 (1) 613 (2022)
https://doi.org/10.1520/JTE20210183
On the Impact of Additive Manufacturing Processes Complexity on Modelling
Panagiotis Stavropoulos, Panagis Foteinopoulos and Alexios PapapacharalampopoulosApplied Sciences 11 (16) 7743 (2021)
https://doi.org/10.3390/app11167743
Additive Manufacturing: A Layered Taxonomy and Classification for Material Engineering Process
Onuchukwu Godwin Chike, Norhayati Binti Ahmad and Uday M. Basheer Al-NaibMaterials Science Forum 1045 157 (2021)
https://doi.org/10.4028/www.scientific.net/MSF.1045.157
Powder bed fusion process: A brief review
D. Dev Singh, T. Mahender and Avala Raji ReddyMaterials Today: Proceedings 46 350 (2021)
https://doi.org/10.1016/j.matpr.2020.08.415
I-support soft arm for assistance tasks: a new manufacturing approach based on 3D printing and characterization
Luca Arleo, Gianni Stano, Gianluca Percoco and Matteo CianchettiProgress in Additive Manufacturing 6 (2) 243 (2021)
https://doi.org/10.1007/s40964-020-00158-y
Advances in additive manufacturing of shape memory polymer composites
Irina Tatiana Garces and Cagri AyranciRapid Prototyping Journal 27 (2) 379 (2021)
https://doi.org/10.1108/RPJ-07-2020-0174
3B Yazıcı Teknolojilerindeki Kullanılan Yöntemler ve Gelişmeler Üzerine Bir Derleme
İdris KARAGÖZ, Ayşe DANIŞ BEKDEMİR and Özlem TUNADüzce Üniversitesi Bilim ve Teknoloji Dergisi 9 (4) 1186 (2021)
https://doi.org/10.29130/dubited.877423
469 (2021)
https://doi.org/10.1007/978-3-030-54334-1_33
368 (2021)
https://doi.org/10.1007/978-3-662-62138-7_37
Improving SLM additive manufacturing operation precision with H-infinity controller structure
Fetra Rasoanarivo, Didier Dumur and Pedro Rodriguez-AyerbeCIRP Journal of Manufacturing Science and Technology 33 82 (2021)
https://doi.org/10.1016/j.cirpj.2020.09.007
Combining process and machine modelling: A Cold Spray Additive Manufacturing case
Panagiotis Stavropoulos, Harry Bikas and Theodoros BekiarisProcedia CIRP 95 1015 (2020)
https://doi.org/10.1016/j.procir.2021.01.178
A Shape Optimization Method for Part Design Derived from the Buildability Restrictions of the Directed Energy Deposition Additive Manufacturing Process
Andreas K. Lianos, Harry Bikas and Panagiotis StavropoulosDesigns 4 (3) 19 (2020)
https://doi.org/10.3390/designs4030019
Heat source model calibration for thermal analysis of laser powder-bed fusion
Shahriar Imani Shahabad, Zhidong Zhang, Ali Keshavarzkermani, et al.The International Journal of Advanced Manufacturing Technology 106 (7-8) 3367 (2020)
https://doi.org/10.1007/s00170-019-04908-3
An Overview of Additive Manufacturing of Polymers and Associated Composites
Shukantu Dev Nath and Sabrina NilufarPolymers 12 (11) 2719 (2020)
https://doi.org/10.3390/polym12112719
The Influence of Heat Input on the Microstructure and Properties of Wire-Arc-Additive-Manufactured Al-Cu-Sn Alloy Deposits
Shuai Wang, Huimin Gu, Wei Wang, et al.Metals 10 (1) 79 (2020)
https://doi.org/10.3390/met10010079
Development of a simulation approach for laser powder bed fusion based on scanning strategy selection
Panagis Foteinopoulos, Alexios Papacharalampopoulos, Konstantinos Angelopoulos and Panagiotis StavropoulosThe International Journal of Advanced Manufacturing Technology 108 (9-10) 3085 (2020)
https://doi.org/10.1007/s00170-020-05603-4
Additive Manufacturing Hybrid Processes for Composites Systems
Luis Miguel Oliveira, Sílvia Esteves, António Francisco Tenreiro, et al.Advanced Structured Materials, Additive Manufacturing Hybrid Processes for Composites Systems 129 173 (2020)
https://doi.org/10.1007/978-3-030-44522-5_5
Cement-based additive manufacturing: experimental investigation of process quality
Panagis Foteinopoulos, Vivien Esnault, George Komineas, Alexios Papacharalampopoulos and Panagiotis StavropoulosThe International Journal of Advanced Manufacturing Technology 106 (11-12) 4815 (2020)
https://doi.org/10.1007/s00170-020-04978-8
Recent Problems of Heat-Transfer Simulation in Technological Processes of Selective Laser Melting and Fusion
S. I. Zhavoronok, A. S. Kurbatov, L. N. Rabinskiy and Yu. O. SolyaevHigh Temperature 57 (6) 916 (2019)
https://doi.org/10.1134/S0018151X19060178
Block-based Analytical Hierarchy Process applied for the evaluation of Construction Sector Additive Manufacturing
Panagis Foteinopoulos, Alexios Papacharalampopoulos and Panagiotis StavropoulosProcedia CIRP 81 950 (2019)
https://doi.org/10.1016/j.procir.2019.03.233