A review on optimization of machining performances and recent developments in electro discharge machining
Manufacturing Rev., 6 (2019) 2
Published online: 2019-02-15
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Electrical discharge machining of Ni-based superalloy and its applications in aero turbine parts: a comprehensive review
Asit Behera, Ashok Kumar Sahoo and Siba Sankar MahapatraAdvances in Materials and Processing Technologies 11 (2) 1085 (2025)
https://doi.org/10.1080/2374068X.2024.2358638
Highly efficient sinking EDM of Ti6Al4V utilizing water-in-oil nanoemulsion
Ruixiang Li, Zhiang Zhang, Yizhou Zhang and Hang DongMaterials and Manufacturing Processes 40 (7) 988 (2025)
https://doi.org/10.1080/10426914.2025.2476454
Electrical discharge machining of hybrid metal matrix composites: a comprehensive review
Satesh Sah, Santanu Sardar, Ashim Guha and Debdulal DasThe International Journal of Advanced Manufacturing Technology 136 (2) 447 (2025)
https://doi.org/10.1007/s00170-024-14805-z
Development of an artificial intelligence model for wire electrical discharge machining of Inconel 625 in biomedical applications
Pasupuleti Thejasree, Natarajan Manikandan, Neeraj Sunheriya, Jayant Giri, Rajkumar Chadge, T. Sathish, Ajay Kumar and Muhammad Imam AmmarullahIET Collaborative Intelligent Manufacturing 6 (4) (2024)
https://doi.org/10.1049/cim2.70015
Investigation on the impact of sub-zero treated electrodes in EDM
B. K. Tharian, P.B. Dhanish and R. ManuMaterials and Manufacturing Processes 39 (7) 1000 (2024)
https://doi.org/10.1080/10426914.2023.2289673
Electric discharge machining performance measures and optimisation: a review
Vishal Singh, Ashok Kumar Sharma, Ashish Goyal, Kuldeep Kumar Saxena, Poonam Negi and P. Chinna Sreenivas RaoAdvances in Materials and Processing Technologies 10 (2) 517 (2024)
https://doi.org/10.1080/2374068X.2023.2168775
15 (2024)
https://doi.org/10.1007/978-981-99-6062-0_3
38 (2024)
https://doi.org/10.1117/12.3025845
Wear behaviour and coating performance of WC–Cu composite electrodes on ZE41A magnesium alloy using electrospark deposition
U. Elaiyarasan, P. Baranitharan, V. Satheeshkumar, C. Senthilkumar and B. VinodCanadian Metallurgical Quarterly 1 (2024)
https://doi.org/10.1080/00084433.2024.2437218
Influence of graphene coating in electrical discharge machining with an aluminum electrode
Dong Pham Van, Shailesh Shirguppikar, Phan Nguyen Huu, et al.Journal of the Mechanical Behavior of Materials 32 (1) (2023)
https://doi.org/10.1515/jmbm-2022-0287
Advances in Micro and Nano Manufacturing and Surface Engineering
B. C. Karthik, P. K. Pradeesh Karun, P. Sanal, Ch. Surendra and Basil KuriachenLecture Notes in Mechanical Engineering, Advances in Micro and Nano Manufacturing and Surface Engineering 129 (2023)
https://doi.org/10.1007/978-981-19-4571-7_12
EDM of Ti6Al4V under nano-graphene mixed dielectric: a detailed roughness analysis
Kashif Ishfaq, Muhammad Asad Maqsood, Saqib Anwar, et al.The International Journal of Advanced Manufacturing Technology 120 (11-12) 7375 (2022)
https://doi.org/10.1007/s00170-022-09207-y
High Precision Magnetic Levitation Actuator for Micro-EDM
Boran Luan, Xiaoyou Zhang, Fangchao Xu, Guang Yang, Junjie Jin, Chengcheng Xu, Feng Sun and Koichi OkaActuators 11 (12) 361 (2022)
https://doi.org/10.3390/act11120361
Analyzing laminated electrode(s) performance for the EDM of microchannel(s) in Al(6061)
Kashif Ishfaq, Rakhshanda Naveed, Muhammad Asad Maqsood and Mudassar RehmanThe International Journal of Advanced Manufacturing Technology 123 (7-8) 2941 (2022)
https://doi.org/10.1007/s00170-022-10360-7
Progress in Engineering Technology IV
Afnan Nizarif Ahmad Zamzuri, Muhammad Al’Hapis Abdul Razak, Aznizam Abdullah, et al.Advanced Structured Materials, Progress in Engineering Technology IV 169 15 (2022)
https://doi.org/10.1007/978-3-030-93250-3_2
Testing of the Plastic Deformation of Metals
Testing of the Plastic Deformation of Metals 81 (2021)https://doi.org/10.1017/9781108943369.006
The Effect of Electrical Discharge Machining Total Heat Generated on White Layer Thickness (WLT) and Fatigue Life for Die Steel
Saad Mahmood Ali, Ahmed Naif Al-Khazraji and Samir Ali AminMaterials Science Forum 1039 182 (2021)
https://doi.org/10.4028/www.scientific.net/MSF.1039.182
An Intelligent System for Improving Electric Discharge Machining Efficiency Using Artificial Neural Network and Adaptive Control of Debris Removal Operations
Cheng-Hsiung Lee and Ton-Shin LaiIEEE Access 9 75302 (2021)
https://doi.org/10.1109/ACCESS.2021.3080297
Integrated Control of Electrical Discharge Machining (EDM) using PSoC
M A C Abdullah, A Yahya and W N W M ShukriJournal of Physics: Conference Series 1529 (4) 042087 (2020)
https://doi.org/10.1088/1742-6596/1529/4/042087
Biomaterials in Orthopaedics and Bone Regeneration
Kanishka Jha, Jagesvar Verma and Chander PrakashMaterials Horizons: From Nature to Nanomaterials, Biomaterials in Orthopaedics and Bone Regeneration 215 (2019)
https://doi.org/10.1007/978-981-13-9977-0_14
55 (2019)
https://doi.org/10.1109/IICETA47481.2019.9012975