A comparative review on cold gas dynamic spraying processes and technologies
Manufacturing Rev., 6 (2019) 25
Published online: 2019-11-07
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Numerical simulation of the effects of spraying parameters on the bow shock wave and atomized droplets deposition
Jun Song, Wenjun Zhou, Wenhua Shang, Junpeng Li, Qi Zhang, Xuemei Yin, Juanfang Liu and Sailin LiuMaterials Chemistry and Physics 130919 (2025)
https://doi.org/10.1016/j.matchemphys.2025.130919
The Influence of MoS2 on Corrosion Behavior of B4C-Reinforced Aluminium Composite Coatings by Cold Spray
Runling Qian, Qiang Wang, Wenjuan Niu and Ning HuJOM 77 (3) 1671 (2025)
https://doi.org/10.1007/s11837-024-07091-3
A Comparative Review on Cold Sprayed Cermet Coatings and their Applications in High Temperature Corrosion, Oxidation and Wear Resistance
Josephine Selvaraj, Kavindan Balakrishnan, Krishnan Raja, Indrajit Charit and Vaidyanathan (Ravi SubramanianResults in Surfaces and Interfaces 100589 (2025)
https://doi.org/10.1016/j.rsurfi.2025.100589
Determination of the Thermal Expansion of Volume Composite Materials Al–Al2O3, Obtained by the Cold Gas Dynamic Spraying Technology
E. Yu. Gerashchenkova, D. A. Gerashchenkov, M. A. Markov, I. N. Kravchenko, R. Yu. Bystrov, E. N. Barkovskaya and A. D. BykovaJournal of Machinery Manufacture and Reliability 53 (S2) S217 (2024)
https://doi.org/10.1134/S105261882470153X
Investigation of Elastic Properties of Polyether Ether Ketone by Uniaxial Compression Method
S. Sh. Rekhviashvili, D. S. Gaev and S. Yu. KhashirovaInorganic Materials: Applied Research 15 (4) 1039 (2024)
https://doi.org/10.1134/S2075113324700576
31 (2024)
https://doi.org/10.1002/9781394263172.ch2
45S5/PEEK Coatings by Cold Gas Spray with In Vitro Bioactivity, Degradation, and Cellular Proliferation
Beatriz Garrido, Vicente Albaladejo-Fuentes, Sergi Dosta, Natalia Garcia-Giralt and Irene Garcia-CanoJournal of Thermal Spray Technology 33 (4) 895 (2024)
https://doi.org/10.1007/s11666-024-01726-2
Numerical Study on Simulating the Deposition Process of Cold Spray Multi-Particle Al-6061 based on CEL Method
Kun TanMechanics and Advanced Technologies 8 (1(100)) 23 (2024)
https://doi.org/10.20535/2521-1943.2024.8.1(100).295144
Resistance spot welding of dissimilar material joints with a cold-gas-sprayed inlayer
Christian Hagen, Franz-Josef Klinkenberg, Ralf Ossenbrink and Vesselin MichailovThe International Journal of Advanced Manufacturing Technology 127 (11-12) 5679 (2023)
https://doi.org/10.1007/s00170-023-11897-x
A correlational study of process parameters on properties of low-pressure cold sprayed copper coatings
Maricruz Hernández-Hernández, Rodrigo González-Mejía, Victor Hugo Mercado-Lemus, et al.The International Journal of Advanced Manufacturing Technology 125 (9-10) 4679 (2023)
https://doi.org/10.1007/s00170-023-10976-3
(2023)
https://doi.org/10.21203/rs.3.rs-2830178/v1
Analysis of spray particles entrance of Right-angle cold spray nozzle based on CFD
Kun TanMechanics and Advanced Technologies 7 (3 (99)) 325 (2023)
https://doi.org/10.20535/2521-1943.2023.7.3.292244
Review of the coatings used for brake discs regarding their wear resistance and environmental effect
Saša Vasiljević, Jasna Glišović, Blaža Stojanović and Aleksandar VenclProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236 (10) 1932 (2022)
https://doi.org/10.1177/13506501211070654
Ordered Zirconium Alloys with Intermetallic Hardening Research on Adhesive Mechanism of Al + Ti Mixed Powders Deposited on Ti6Al4V Substrate by CS Using Abaqus/Explicit
W. J. Hu, K. Tan, S. Markovych, T. T. Cao and X. L. LiuMETALLOFIZIKA I NOVEISHIE TEKHNOLOGII 44 (5) 613 (2022)
https://doi.org/10.15407/mfint.44.05.0613
Development of technology for deposition of thick copper layers onto ceramic substrates applied in power electronics
Yuri K. Nepochatov, Pyotr M. Pletnev, Vladimir F. Kosarev and Tatiana S. GudymaChimica Techno Acta 9 (3) (2022)
https://doi.org/10.15826/chimtech.2022.9.3.07
Effect of Gas Propellant Temperature on the Microstructure, Friction, and Wear Resistance of High-Pressure Cold Sprayed Zr702 Coatings on Al6061 Alloy
Alessandro M. Ralls, Ashish K. Kasar, Mohammadreza Daroonparvar, et al.Coatings 12 (2) 263 (2022)
https://doi.org/10.3390/coatings12020263
Thick Cu-hBN Coatings Using Pulsed Gas Dynamic Spray Process: Coating Formation Analysis and Characterization
R. Nikbakht and B. JodoinJournal of Thermal Spray Technology 31 (3) 609 (2022)
https://doi.org/10.1007/s11666-022-01318-y
Microstructural Studies of the Copper-Based Coating Obtained by Cold Gas-Dynamic Spraying for the Restoration of Worn-Out Contact Wires
Sergey Grigoriev, Eugeniy Gershman, Iosif Gershman, Alexander Mironov and Pavel PodrabinnikCoatings 11 (9) 1067 (2021)
https://doi.org/10.3390/coatings11091067
Improving the Wear and Corrosion Resistance of Maraging Part Obtained by Cold Gas Spray Additive Manufacturing
Rodolpho F. Vaz, Alessio Silvello, Vicente Albaladejo, Javier Sanchez and Irene García CanoMetals 11 (7) 1092 (2021)
https://doi.org/10.3390/met11071092
Recent Advances in Multi-Functional Coatings for Soft Magnetic Composites
Emir Pošković, Fausto Franchini, Luca Ferraris, et al.Materials 14 (22) 6844 (2021)
https://doi.org/10.3390/ma14226844
Study of a Cold Spray Nozzle Throat on Acceleration Characteristics via CFD
W.J. Hu, K. Tan, S. Markovych and X.L. LiuJournal of Engineering Sciences 8 (1) F19 (2021)
https://doi.org/10.21272/jes.2021.8(1).f3
PROCESSES AND TECHNOLOGIES OF COLD GAS DYNAMIC SPRAYING OF AGRICULTURAL EQUIPMENT
Nataliia Veselovska, Oleg Gaidamak, Mykhailo Karpiichuk and Jylia KucherenkoENGINEERING, ENERGY, TRANSPORT AIC (2(113)) 4 (2021)
https://doi.org/10.37128/2520-6168-2021-2-1
GAS DYNAMIC COLD SPRAYING: A REVIEW ON MATERIALS, PARAMETERS, APPLICATIONS AND CHALLENGES
KUMAR SANTOSH and KUMAR RAKESHi-manager’s Journal on Future Engineering and Technology 16 (2) 43 (2021)
https://doi.org/10.26634/jfet.16.2.17624
Solid-State Metal Additive Manufacturing for Structural Repair
Ryan B. Gottwald, R. Joey Griffiths, Dylan T. Petersen, Mackenzie E. J. Perry and Hang Z. YuAccounts of Materials Research 2 (9) 780 (2021)
https://doi.org/10.1021/accountsmr.1c00098
A Molecular Dynamics Investigation of the Temperature Effect on the Mechanical Properties of Selected Thin Films for Hydrogen Separation
Sunday Oyinbo and Tien-Chien JenMembranes 10 (9) 241 (2020)
https://doi.org/10.3390/membranes10090241
Molecular Dynamics Simulation of Dislocation Plasticity Mechanism of Nanoscale Ductile Materials in the Cold Gas Dynamic Spray Process
Sunday Temitope Oyinbo and Tien-Chien JenCoatings 10 (11) 1079 (2020)
https://doi.org/10.3390/coatings10111079
Effects of Metal Particles on Cold Spray Deposition onto Ti-6Al-4V Alloy via Abaqus/Explicit
W. J. W. J.Journal of Engineering Sciences 7 (2) E19 (2020)
https://doi.org/10.21272/jes.2020.7(2).e4