Hybrid additive manufacturing of steels and alloys
Manufacturing Rev., 7 (2020) 6
Published online: 2020-02-28
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Minimizing Thermal and Microstructural Variations in Hybrid Additively Manufactured Aluminum Alloys: A Review
Samson Dare Oguntuyi, Mandlenkosi G. R. Mahlobo, Kasongo Nyembwe, Peter M. Mashinini and Peter Apata OlubambiAdvanced Engineering Materials (2026)
https://doi.org/10.1002/adem.202502805
Artificial intelligence in metal additive manufacturing: current status, challenges, and future developments
Duc Anh Nguyen, Le Bui Giang Truong, Van Anh Nguyen, Minh Tuan Vu, Ha Manh Bui, Minh Thanh Le, Trong Duc Nguyen, Dung Hoang Tien and Xuan Hai LeJournal of Intelligent Manufacturing (2026)
https://doi.org/10.1007/s10845-025-02771-6
Surface Evolution and Corrosion Response of SLM–Cast Hybrid Aluminium Alloys Before and After Electrochemical Exposure
Samson Dare Oguntuyi, Mandlenkosi G. R. Mahlobo, Femi J. Akinfolarin, Kasongo Nyembwe, Peter M. Mashinini and Peter OlubambiEngineering Reports 8 (1) (2026)
https://doi.org/10.1002/eng2.70581
Exploring wire laser metal deposition of 316L stainless steel as a viable solution for combined manufacturing routes
Fabio Guaglione, Akshay Ashok Benni and Barbara PrevitaliProgress in Additive Manufacturing 10 (5) 3859 (2025)
https://doi.org/10.1007/s40964-024-00832-5
Hybrid Manufacturing: A Critical Review on the Integration of Metal Additive Manufacturing and Forming
Anamul Hasan and Syed Sohail AkhtarArabian Journal for Science and Engineering (2025)
https://doi.org/10.1007/s13369-025-10885-5
A Novel Hybrid Technique for Enhancing Mechanical Properties in Additively Manufactured Steels
Mustafa Safa Yılmaz, Mevlüt Yunus Kayacan and Mamoun AlshihabiInternational Journal of Precision Engineering and Manufacturing 26 (11) 3103 (2025)
https://doi.org/10.1007/s12541-025-01294-7
An Experimental Study on the Fatigue Response of Hybrid Additively Manufactured 1.2343 Hot Work Steel ‐ MARAGING Steel MS1
Dario Croccolo, Snežana Ćirić‐Kostić, Massimiliano De Agostinis, Stefano Fini, Mattia Mele, Nebojša Bogojević, Vladimir Sinđelić and Giorgio OlmiFatigue & Fracture of Engineering Materials & Structures 48 (5) 2162 (2025)
https://doi.org/10.1111/ffe.14602
An overview of fused filament fabrication technology and the advancement in PLA-biocomposites
Mahendran Samykano, Rajan Kumaresan, Jeevendran Kananathan, Kumaran Kadirgama and Adarsh Kumar PandeyThe International Journal of Advanced Manufacturing Technology 132 (1-2) 27 (2024)
https://doi.org/10.1007/s00170-024-13394-1
Functionally graded materials of SS316L and IN625 manufactured by direct metal deposition
D. Dev Singh, Suresh Arjula and A. Raji ReddyJournal of the Mechanical Behavior of Materials 33 (1) (2024)
https://doi.org/10.1515/jmbm-2024-0026
Evaluation of Shape Properties in Hybrid Laser-powder Bed Fusion Additive Manufacturing Process
Pil-Ho Lee, Yeo-Ul Song, Yongrae Kim, Segon Heo and Chang-Woo LeeJournal of the Korean Society of Manufacturing Technology Engineers 32 (6) 309 (2023)
https://doi.org/10.7735/ksmte.2023.32.6.309
821 (2023)
https://doi.org/10.1007/978-3-031-20752-5_48
A case study of hybrid manufacturing of a Ti-6Al-4V titanium alloy hip prosthesis
António José Festas, Daniel Amaral Figueiredo, Sílvia Ribeiro Carvalho, Thang Hoang Vo, Pierre-Thomas Doutre, François Villeneuve, António Manuel Ramos and João Paulo DavimThe International Journal of Advanced Manufacturing Technology 129 (9-10) 4617 (2023)
https://doi.org/10.1007/s00170-023-12621-5
Advances in Additive Manufacturing and Metal Joining
Sayan Doloi, Atul Singh Rajput, Sajan Kapil and Manas DasLecture Notes in Mechanical Engineering, Advances in Additive Manufacturing and Metal Joining 161 (2023)
https://doi.org/10.1007/978-981-19-7612-4_14
MODERN PRODUCTION TECHNOLOGIES APPLIED TO VARIOUS LIFE CYCLE PHASES OF PRODUCTS AND MACHINE PARTS
Oganes Oganesyan and Oleg BurlachenkoTransport engineering 2023 (3) 21 (2023)
https://doi.org/10.30987/2782-5957-2023-3-21-29
Top Surface Roughness Modeling for Robotic Wire Arc Additive Manufacturing
Heping Chen , Ahmed Yaseer and Yuming ZhangJournal of Manufacturing and Materials Processing 6 (2) 39 (2022)
https://doi.org/10.3390/jmmp6020039
Innovations in Additive Manufacturing
I. Akilan and C. VelmuruganSpringer Tracts in Additive Manufacturing, Innovations in Additive Manufacturing 239 (2022)
https://doi.org/10.1007/978-3-030-89401-6_11
Metal hybrid additive manufacturing: state-of-the-art
Eyob Messele Sefene, Yeabsra Mekdim Hailu and Assefa Asmare TsegawProgress in Additive Manufacturing 7 (4) 737 (2022)
https://doi.org/10.1007/s40964-022-00262-1
Effects of Electrode Negative Pulsing Ratio in Direct Energy Deposition via Variable-Polarity Cold Metal Transfer Process on the Deposition Behavior and Microstructural Characteristics
Tae Hyun Lee, Cheolhee Kim and Minjung KangMetals 12 (3) 475 (2022)
https://doi.org/10.3390/met12030475
Parametric Study and Investigations of Bead Geometries of GMAW-Based Wire–Arc Additive Manufacturing of 316L Stainless Steels
Rakesh Chaudhari, Heet Parmar, Jay Vora and Vivek K. PatelMetals 12 (7) 1232 (2022)
https://doi.org/10.3390/met12071232
Processes of Physical Treatment of Stainless Steels Obtained by Additive Manufacturing
Artem Babaev, Vladimir Promakhov, Nikita Schulz, et al.Metals 12 (9) 1449 (2022)
https://doi.org/10.3390/met12091449
Development of an Automated Process Chain for Hybrid Additive Manufacturing using Laser Powder Bed Fusion
Lukas Langer, Matthias Schmitt, Georg Schlick and Johannes SchilpProcedia CIRP 112 358 (2022)
https://doi.org/10.1016/j.procir.2022.09.009
Hydrogen Embrittlement of the Additively Manufactured High-Strength X3NiCoMoTi 18-9-5 Maraging Steel
Angelina Strakosova, Michaela Roudnická, Ondřej Ekrt, Dalibor Vojtěch and Alena MichalcováMaterials 14 (17) 5073 (2021)
https://doi.org/10.3390/ma14175073
Comparative Study on H20 Steel Billets: Additive Manufacturing vs. Powder Metallurgy
S. Nasar, L. J. Baruch, S. J. Vijay, et al.Physics of Metals and Metallography 122 (5) 515 (2021)
https://doi.org/10.1134/S0031918X21050100
Ultrasound in situ characterization of hybrid additively manufactured Ti6Al4V
Luz D. Sotelo, Rakesh Karunakaran, Cody S. Pratt, Michael P. Sealy and Joseph A. TurnerThe Journal of the Acoustical Society of America 150 (6) 4452 (2021)
https://doi.org/10.1121/10.0008972
Closest and long-term prospects of 3D-printing for obstetrics and gynecology
E. V. Kudryavtseva, V. V. Kovalev, E. S. Zakurinova, G. Muller-Kamskii and V. V. PopovUral Medical Journal 20 (1) 76 (2021)
https://doi.org/10.52420/2071-5943-2021-20-1-76-81
Functionally Graded Materials Manufactured by Direct Energy Deposition: A review
D. Dev Singh, Suresh Arjula and A. Raji ReddyMaterials Today: Proceedings 47 2450 (2021)
https://doi.org/10.1016/j.matpr.2021.04.536
Capability of Multi-Material Laser-Based Powder Bed Fusion—Development and Analysis of a Prototype Large Bore Engine Component
Matthias Schneck, Max Horn, Maik Schindler and Christian SeidelMetals 12 (1) 44 (2021)
https://doi.org/10.3390/met12010044
Powder Bed Fusion Additive Manufacturing Using Critical Raw Materials: A Review
Vladimir V. Popov, Maria Luisa Grilli, Andrey Koptyug, et al.Materials 14 (4) 909 (2021)
https://doi.org/10.3390/ma14040909
Current trends and research opportunities in hybrid additive manufacturing
Ugur M. Dilberoglu, Bahar Gharehpapagh, Ulas Yaman and Melik DolenThe International Journal of Advanced Manufacturing Technology 113 (3-4) 623 (2021)
https://doi.org/10.1007/s00170-021-06688-1
Interface Joint Strength between SS316L Wrought Substrate and Powder Bed Fusion Built Parts
Jason M. Weaver, John R. Linn and Michael P. MilesMaterials 14 (11) 3041 (2021)
https://doi.org/10.3390/ma14113041
Review on additive hybrid- and multi-material-manufacturing of metals by powder bed fusion: state of technology and development potential
M. Schneck, M. Horn, M. Schmitt, et al.Progress in Additive Manufacturing 6 (4) 881 (2021)
https://doi.org/10.1007/s40964-021-00205-2
Effect of Laser Processing on Surface Properties of Additively Manufactured 18-Percent Nickel Maraging Steel Parts
Olegas Černašėjus, Jelena Škamat, Vladislav Markovič, Nikolaj Višniakov and Simonas IndrišiūnasCoatings 10 (6) 600 (2020)
https://doi.org/10.3390/coatings10060600