Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Parametric optimization while turning Ti-6Al-4V alloy in Mist-MQCL (Green environment) using the DEAR method

Vennela V. K. Lakshmi, Kambagowni Venkata Subbaiah, Arun Vikram Kothapalli, Kilparthi Suresh

Manufacturing Rev., 7 (2020) 38

Published online: 2020-11-23

DOI: https://doi.org/10.1051/mfreview/2020034

This article has been cited by the following article(s):

E. V. Fominov and V. E. Gvindjiliya
573 (2026)
https://doi.org/10.1007/978-3-032-04273-6_54

Do Duc Trung, Aleksandar Ašonja, Duong Thi Thanh Thuy, Duong Van Duc and Nguyen Chi Bao
1242 249 (2025)
https://doi.org/10.1007/978-3-031-80597-4_20

Mixed Aggregation by Comprehensive Normalization Technique–Based Parametric Optimization of Turning of Ti-6Al-4V Alloy in Minimum Quantity Lubrication Environment

Partha Protim Das, Saurabh Sharma and Shankar Chakraborty
SAE International Journal of Materials and Manufacturing 19 (3) (2025)
https://doi.org/10.4271/05-19-03-0022

Intelligent Machine Learning Strategies for Minimizing Machining Power in Minimum Quantity Lubrication Machining of Ti6Al4V Alloy

Dhrubajit Sarma, Rupshree Ozah, Jyotisman Borah, Muthumari Chandrasekaran and Ashok Kumar Sahoo
Journal of Materials Engineering and Performance 34 (20) 24415 (2025)
https://doi.org/10.1007/s11665-025-10989-x

Abinay Baraily, Ranjan Kumar Ghadai, Soham Das and Ruben Phipon
2786 020011 (2023)
https://doi.org/10.1063/5.0146135

A new environment-friendly magnetorheological finishing and fuzzy grey relation analysis in Ti-6Al-4V alloy polishing

Nguyen Trinh Duy, Dung Hoang Tien and Pham Thi Thieu Thoa
Manufacturing Review 9 17 (2022)
https://doi.org/10.1051/mfreview/2022013

Multi-criteria decision making of turning operation based on PEG, PSI and CURLI methods

Do Duc Trung
Manufacturing Review 9 9 (2022)
https://doi.org/10.1051/mfreview/2022007

AISI 4140 ÇELİĞİNİN FREZLEMESİNİN TAGUCHİ-DEAR YÖNTEMİYLE OPTİMİZAYONU

Yusuf FEDAİ
El-Cezeri Fen ve Mühendislik Dergisi (2022)
https://doi.org/10.31202/ecjse.1024895

Mohammed U. Iqbal, J. Santhakumar, Gajendra Sharma and Rishav Singh
2460 020010 (2022)
https://doi.org/10.1063/5.0095655

Comparison of the RAFSI and PIV method in multi-criteria decision making: application to turning processes

Do Duc Trung, Hoang Xuan Thinh and Le Dang Ha
International Journal of Metrology and Quality Engineering 13 14 (2022)
https://doi.org/10.1051/ijmqe/2022014

Parameter Selection to Ensure Multi-Criteria Optimization of the Taguchi Method Combined with the Data Envelopment Analysis-based Ranking Method when Milling SCM440 Steel

N. V. Cuong and N. L. Khanh
Engineering, Technology & Applied Science Research 11 (5) 7551 (2021)
https://doi.org/10.48084/etasr.4315

A combination method for multi-criteria decision making problem in turning process

Do Duc Trung
Manufacturing Review 8 26 (2021)
https://doi.org/10.1051/mfreview/2021024