MQL Machining with nano fluid: a review
Manufacturing Rev., 8 (2021) 13
Published online: 2021-04-27
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
594 263 (2026)
https://doi.org/10.1007/978-3-031-89771-9_18
A review on the sustainable grinding process employing nanofluids under the minimum quantity lubrication (MQL) regime
Talwinder SinghIndustrial Lubrication and Tribology 78 (6) 888 (2026)
https://doi.org/10.1108/ILT-11-2025-0498
Enhancing machinability of GTD-450 alloy: a comparative study on tool wear and surface roughness under MQL, Al₂O₃-nanofluid MQL, and ZnO-nanofluid MQL conditions
Abolfzal Mostaghim Bakhshayesh, Hamidreza MohammadAli Dastgerdi, Masoud Saberi, Behnam Davoodi, Ali Hajaliakbari and Seyed Ali NiknamThe International Journal of Advanced Manufacturing Technology 142 (7-8) 3817 (2026)
https://doi.org/10.1007/s00170-025-17192-1
Application of Hybrid Nanofluids in MQL Assisted Machining Operations: Exploring Synergies and Establishing Guidelines
José V. Abellán-Nebot, Kudama Habib Ameen, Aqib Mashood Khan and Rosa MondragónInternational Journal of Precision Engineering and Manufacturing-Green Technology 12 (2) 657 (2025)
https://doi.org/10.1007/s40684-024-00675-z
Comparison of drilling and milling hole-forming mechanism of AFRP and experimental study of MQL
Lin Wang, Xiangbao Li, Wentian Shi, Kunting Bu, Xiangyu Wang, Wenming Zhu and Liqiang XiaoThe International Journal of Advanced Manufacturing Technology 132 (9-10) 4915 (2024)
https://doi.org/10.1007/s00170-024-13654-0
Effect of nanoparticles mixing-ratio of Al 2 O 3 -MWCNT hybrid nano-cutting fluid during MQL turning
Anjali Gupta, Rajesh Kumar, Harmesh Kumar Kansal and Harry GargMaterials and Manufacturing Processes 39 (1) 43 (2024)
https://doi.org/10.1080/10426914.2023.2187825
Parameter optimization of the MQL nozzle by the computational fluid dynamics
Lan Yan, Kunhui Luo, Tao Jiang, Hong Xie, Yousheng Li, Zhiyang Xiang and Feng JiangThe International Journal of Advanced Manufacturing Technology 131 (9-10) 4797 (2024)
https://doi.org/10.1007/s00170-024-13315-2
Machinability investigation of 254 SMO super austenitic stainless steel in end milling under different cutting and lubri-cooling conditions
Émerson S. Passari, André J. Souza and Carlos A. G. AitaThe International Journal of Advanced Manufacturing Technology 131 (12) 6061 (2024)
https://doi.org/10.1007/s00170-024-13375-4
Combination of minimum quantity lubrication (MQL) with solid lubricant (SL): challenges, predictions and implications for sustainability
André Alves de Resende and Aline Gonçalves dos SantosMachining Science and Technology 28 (5) 777 (2024)
https://doi.org/10.1080/10910344.2024.2394946
Biodegradability, Eco-toxicological, Cell Viability, and MQL Re-usability Studies on Modified Vegetable Oil Metalworking Fluids
Muralidhar Vardhanapu, Phaneendra Kiran Chaganti, Pravesh Sharma and Onkar Prakash KulkarniArabian Journal for Science and Engineering 49 (11) 15225 (2024)
https://doi.org/10.1007/s13369-024-08941-7
Investigating the influence of biodegradable nanofluid process cooling on dynamic recrystallization and grain microstructure in friction stir welding of AA6082 alloy
Shubham Verma, ChuanSong Wu, Lalit Thakur, Najib Ahmad Muhammad and Shengli LiJournal of Materials Processing Technology 118700 (2024)
https://doi.org/10.1016/j.jmatprotec.2024.118700
Tribological Analysis and Operation Issues of SiO2 Nanolubricants for MQL Machining Operations
Rosa Mondragón, Jose V. Abellán-Nebot, Kudama Habib and Julio SerranoKey Engineering Materials 960 11 (2023)
https://doi.org/10.4028/p-Tu1Cg9
State of the Art of Biodegradable Nanofluids Application in Machining Processes
Vitor Baldin, Leonardo Rosa Ribeiro da Silva, Alisson Rocha Machado and Celso Ferraz HouckInternational Journal of Precision Engineering and Manufacturing-Green Technology 10 (5) 1299 (2023)
https://doi.org/10.1007/s40684-022-00486-0
1 (2023)
https://doi.org/10.1109/IEEECONF58110.2023.10520618
(2023)
https://doi.org/10.21203/rs.3.rs-3656453/v1
Nanofluids, micro-lubrications and machining process optimisations − a review
Rahul R. Chakule, Sharad S. Chaudhari, Kailas V. Chandratre, Pralhad B. Patole and Poonam S. TalmaleManufacturing Review 10 1 (2023)
https://doi.org/10.1051/mfreview/2022034
Role of Nanofluid Minimum Quantity Lubrication (NMQL) in Machining Application
Raj Shah, Khosro A. Shirvani, Alexandra Przyborowski, Nikhil Pai and Mohsen MoslehLubricants 10 (10) 266 (2022)
https://doi.org/10.3390/lubricants10100266
A combination method for multi-criteria decision making problem in turning process
Do Duc TrungManufacturing Review 8 26 (2021)
https://doi.org/10.1051/mfreview/2021024