EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Manufacturing Rev., 8 (2021) 26 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Applying the RAWEC Method for Material Selection of Crankshafts

Nguyen Hoang Giang and Nguyen Duc Chinh
International Journal of Scientific Research in Science and Technology 12 (1) 558 (2025)
https://doi.org/10.32628/IJSRST2512147

Combining the Entropy Method and Genetic Algorithm in the Multi-Objective Grinding Process

Nguyen Trong Mai
Engineering, Technology & Applied Science Research 15 (2) 21888 (2025)
https://doi.org/10.48084/etasr.10312

Multi-Optimization in Turning Process

Bui Thanh Binh and Nguyen Duc Hanh
International Journal of Scientific Research in Science and Technology 12 (1) 628 (2025)
https://doi.org/10.32628/IJSRST25121203

Application of the PSI Method in Selecting Sustainable Energy Development Technologies

Tran Van Dua
Engineering, Technology & Applied Science Research 15 (1) 19596 (2025)
https://doi.org/10.48084/etasr.9317

Evaluating the Impact of Weighting Methods on the Stability of Scores for Alternatives in Multi-Criteria Decision-Making Problems

Nguyen Thi Dieu Linh, Nguyen Hong Son and Dang Xuan Thao
Engineering, Technology & Applied Science Research 15 (1) 19998 (2025)
https://doi.org/10.48084/etasr.9518

Developing a High-Precision Surface Roughness Model For X12m Steel Turning

Vuong Nhu Yen and Hoang Van Huynh
International Journal of Scientific Research in Science and Technology 12 (1) 427 (2025)
https://doi.org/10.32628/IJSRST25121181

Enhancing drilling performance in 3D printed PLA implants application of PIV and ML models

K Shunmugesh, M Ganesh, R Bhavani, M. Adam Khan, M. Saravana Kumar, L. Rajeshkumar, Priyanka Mishra, Rajesh Jesudoss Hynes Navasingh, Angela Jennifa Sujana J, Jana Petru and Čep Robert
Scientific Reports 15 (1) (2025)
https://doi.org/10.1038/s41598-025-96126-z

An Application on Enterprise Resource Planning (ERP) Selection with Multi-Criteria Decision-Making Methods

Huriye Akpınar
Celal Bayar Üniversitesi Fen Bilimleri Dergisi 21 (2) 28 (2025)
https://doi.org/10.18466/cbayarfbe.1513901

Multi-Objective Optimization of Skd11 Steel Grinding Process using Entropy and RAM Methods

Bui Thanh Danh
European Journal of Engineering and Technology Research 10 (3) 1 (2025)
https://doi.org/10.24018/ejeng.2025.10.3.3263

Effect of Plasma Nitriding Technology Parameters on Working Surface Quality Gears made of SAE 5120 Steel

Le Hong Ky and Vu Duong
Journal of Vibration Engineering & Technologies 12 (S1) 793 (2024)
https://doi.org/10.1007/s42417-024-01446-5

Overcoming the Limitations of the RAPS Method by identifying Alternative Data Normalization Methods

Nguyen Van Thien, Hoang Tien Dung and Do Duc Trung
Engineering, Technology & Applied Science Research 14 (4) 15745 (2024)
https://doi.org/10.48084/etasr.7909

Building a Ranking System for Lecturers Based on Student Evaluations in Teaching a Specific Course: A Case Study at a University in Vietnam

Do Duc Trung, Branislav Dudić, Duong Van Duc, Nguyen Hoai Son and Alexandra Mittelman
International Journal of Cognitive Research in Science, Engineering and Education (IJCRSEE) 12 (2) 335 (2024)
https://doi.org/10.23947/2334-8496-2024-12-2-335-350

Performance evaluation of process parameters using MCDM methods for Titanium Alloy (Ti6al4v) in turning operation

Sushil V Ingle and Dadarao N Raut
Australian Journal of Mechanical Engineering 22 (5) 958 (2024)
https://doi.org/10.1080/14484846.2023.2203886

Selection of Crankshaft Manufacturing Material by the PIV Method

Hong Son Nguyen, Tran Trung Hieu, Nguyen Manh Thang, Huynh Nhu Tan, Nguyen Tien Can, Pham Thi Thao and Nguyen Chi Bao
Engineering, Technology & Applied Science Research 14 (4) 14848 (2024)
https://doi.org/10.48084/etasr.7514

Associational strategy around a collective brand of Ecuadorian potters within the popular and solidarity economy in the framework of good living

Milton Marcelo Cárdenas
Data and Metadata 3 (2024)
https://doi.org/10.56294/dm2024.215

Development of alternative data normalization methods for the MCRAT method in multi-criteria decision-making

Nguyen Hong Son, Dang Xuan Thao and Nguyen Van Thien
EUREKA: Physics and Engineering (1) 132 (2024)
https://doi.org/10.21303/2461-4262.2025.003391

Multi-objective optimization model of cutting parameters for a sustainable multi-pass turning process

Wahyu Widhiarso, Ibnu Abdul Rosid and Rieska Ernawati
Jurnal Sistem dan Manajemen Industri 7 (1) 1 (2023)
https://doi.org/10.30656/jsmi.v7i1.5747

RSMVC: A new-simple method to select the cutting tool base on multi criteria

Dua Van and Thinh Xuan
Journal of Applied Engineering Science 21 (2) 167 (2023)
https://doi.org/10.5937/jaes0-39772

An MCDM approach for multi-response optimisation of machining parameters in turning of EN8 steel (AISI-1040) for sustainable manufacturing

Mohd Bilal Naim Shaikh, Mohammed Ali, Zahid A. Khan and Mohammad Asjad
International Journal on Interactive Design and Manufacturing (IJIDeM) 17 (6) 3159 (2023)
https://doi.org/10.1007/s12008-023-01368-8

Comparison of two methods in multi-criteria decision-making: application in transmission rod material selection

Hoang Xuan Thinh and Nguyen Trong Mai
EUREKA: Physics and Engineering (6) 59 (2023)
https://doi.org/10.21303/2461-4262.2023.003046

Expanding the Data Normalization Strategy to the MACONT Method for Multi-Criteria Decision Making

Anh-Tu Nguyen
Engineering, Technology & Applied Science Research 13 (2) 10489 (2023)
https://doi.org/10.48084/etasr.5672

Advances in Engineering Research and Application

Trieu Quy Huy, Nguyen Ba Liem, Tran Quang Hau, et al.
Lecture Notes in Networks and Systems, Advances in Engineering Research and Application 602 234 (2023)
https://doi.org/10.1007/978-3-031-22200-9_25

Advances in Engineering Research and Application

Nguyen Hong Linh, Trieu Quy Huy, Tran Minh Tan, et al.
Lecture Notes in Networks and Systems, Advances in Engineering Research and Application 602 244 (2023)
https://doi.org/10.1007/978-3-031-22200-9_26

Combination of design of experiments and simple additive weighting methods: a new method for rapid multi-criteria decision making

Tran Van Dua
EUREKA: Physics and Engineering (1) 120 (2023)
https://doi.org/10.21303/2461-4262.2023.002733

Advances in Engineering Research and Application

Trieu Quy Huy, Tran Huu Danh, Bui Thanh Danh, et al.
Lecture Notes in Networks and Systems, Advances in Engineering Research and Application 602 699 (2023)
https://doi.org/10.1007/978-3-031-22200-9_74

Advances in Engineering Research and Application

Trieu Quy Huy, Nguyen Hong Linh, Tra n Huu Danh, et al.
Lecture Notes in Networks and Systems, Advances in Engineering Research and Application 602 227 (2023)
https://doi.org/10.1007/978-3-031-22200-9_24

Modeling and optimization in turning of PA66-GF30% and PA66 using multi-criteria decision-making (PSI, MABAC, and MAIRCA) methods: a comparative study

Sabrina Haoues, Mohamed Athmane Yallese, Salim Belhadi, Salim Chihaoui and Alper Uysal
The International Journal of Advanced Manufacturing Technology 124 (7-8) 2401 (2023)
https://doi.org/10.1007/s00170-022-10583-8

Advances in Engineering Research and Application

Trieu Quy Huy, Le Hong Ky, Le Hoang Anh, et al.
Lecture Notes in Networks and Systems, Advances in Engineering Research and Application 602 254 (2023)
https://doi.org/10.1007/978-3-031-22200-9_27

Advances in Engineering Research and Application

Nguyen Anh Tuan, Trieu Quy Huy, Tran Huu Danh, et al.
Lecture Notes in Networks and Systems, Advances in Engineering Research and Application 602 389 (2023)
https://doi.org/10.1007/978-3-031-22200-9_42

Combination of DOE and PIV methods for multi-criteria decision making

Trung Duc and Tan Ngoc
Journal of Applied Engineering Science 21 (2) 361 (2023)
https://doi.org/10.5937/jaes0-41482

Advances in Engineering Research and Application

Tran Huu Danh, Bui Thanh Danh, Trieu Quy Huy, et al.
Lecture Notes in Networks and Systems, Advances in Engineering Research and Application 602 262 (2023)
https://doi.org/10.1007/978-3-031-22200-9_28

Multi-Objective Optimization of Turning Process by Fuca Method

Xuan Thinh Hoang
Strojnícky časopis - Journal of Mechanical Engineering 73 (1) 55 (2023)
https://doi.org/10.2478/scjme-2023-0005

Optimization of Technological Parameters when Plasma Nitriding the Gear Working Surface

Bui Thanh Danh and Le Hong Ky
Engineering, Technology & Applied Science Research 13 (3) 11006 (2023)
https://doi.org/10.48084/etasr.5946

Applying Cocoso, Mabac, Mairca, Eamr, Topsis and Weight Determination Methods for Multi-Criteria Decision Making in Hole Turning Process

Duc Trung Do and Nhu-Tung Nguyen
Strojnícky časopis - Journal of Mechanical Engineering 72 (2) 15 (2022)
https://doi.org/10.2478/scjme-2022-0014

Multi-Criteria Decision Making in the Milling Process Using the PARIS Method

H. K. Le
Engineering, Technology & Applied Science Research 12 (5) 9208 (2022)
https://doi.org/10.48084/etasr.5187

Comparison of Multi-Criteria Decision Making Methods Using The Same Data Standardization Method

Hoang Tien Dung, Duc Trung Do and Van Thien Nguyen
Strojnícky časopis - Journal of Mechanical Engineering 72 (2) 57 (2022)
https://doi.org/10.2478/scjme-2022-0016

Improving the Efficiency of Grinding Process Using the Rubber-Pasted Grinding Wheel

Duc Trung Do, Xuan Thinh Hoang and Dang Ha Le
Strojnícky časopis - Journal of Mechanical Engineering 72 (1) 23 (2022)
https://doi.org/10.2478/scjme-2022-0003

Application of EDAS, MARCOS, TOPSIS, MOORA and PIV Methods for Multi-Criteria Decision Making in Milling Process

Do Duc Trung
Strojnícky časopis - Journal of Mechanical Engineering 71 (2) 69 (2021)
https://doi.org/10.2478/scjme-2021-0019