Open Access
Review
Table 1
The work of recently published review articles based on EDM in past 5 years.
| S. No. | Authors | Title of the paper | Aim of the paper | Year | Reference |
|---|---|---|---|---|---|
| 1 | Manjaiah, M., Narendranath, S., Basavarajappa, S. | A review on machining of titanium based alloys using EDM and WEDM | The aim of this review is to present the consolidated information about the contributions of various researchers on the application of EDM and WEDM on titanium materials | 2014 | [136] |
| 2 | Maher, I., Sarhan, A.A.D., Hamdi, M. | Review of improvements in wire electrode properties for longer working time and utilization in wire EDM machining | This paper focuses on the evolution of EDM wire electrode technologies from using copper to the widely employed brass wire electrodes and from brass wire electrodes to the latest coated wire electrodes | 2015 | [137] |
| 3 | Bajaj, R., Tiwari, A.K., Dixit, A.R. | Current trends in electric discharge machining using micro and nano powder materials: a review | This paper presents a summary of some important research work done on PMEDM by mixing micro- and nanosized particle in the dielectric fluid of EDM | 2015 | [138] |
| 4 | Chakraborty, S., Dey, V., Ghosh, S.K. | A review on the use of dielectric fluids and their effects in electrical discharge machining characteristics | This paper presents a literature survey on the use of dielectric fluids and also their effects in electrical discharge machining characteristics | 2015 | [139] |
| 5 | Muthuramalingam, T., Mohan, B. | A review on influence of electrical process parameters in EDM process | This study discusses an overview of the EDM process, influence of process parameters such as input electrical variables, pulse shape, and discharge energy on performance measures such as material removal rate, surface roughness, and electrode wear rate | 2015 | [140] |
| 6 | Mohal, S., Kumar, H., Kansal, S.K. | Nano-finishing of materials by powder mixed electric discharge machining (PMEDM): a review | This paper presents a review of the ongoing research and development in PMEDM, NPMEDM followed by an in-depth discussion on high material removal rate (MRR), low tool wear rate (TWR), low surface roughness (SR), surface modification of workpiece, optimization of process parameters, and process modeling and simulation | 2015 | [141] |
| 7 | Santarao, K., Prasad, C.L.V.R.S.V., Gurugubelli, S.N. | Influence of nano and micro powders in electric discharge machining: a review | This paper presents the effect of nano- and micropowders blended in dielectric medium used in EDM and their influence on MRR, SR, TWR, and white layer thickness (WLT) with the variation of electrical (pulse-on time and peak current), nonelectrical (flushing), powder (type, size, and concentration), and electrode parameters | 2016 | [142] |
| 8 | Liu, Q., Zhang, Q., Zhang, M., Zhang, J. | Review of size effects in micro electrical discharge machining | This paper contains a comprehensive review of size effects in traditional micromachining and characteristics specific to micro-EDM compared to macro-EDM techniques | 2016 | [143] |
| 9 | Shabgard, M.R., Gholipoor, A., Baseri, H. | A review on recent developments in machining methods based on electrical discharge phenomena | This paper reviews the current research trends in EDM process containing dry EDM, near-dry EDM, magnetic field-assisted EDM, ultrasonic vibrations-assisted EDM, and powder-mixed EDM processes which were developed in order to overcome the limitations of EDM process | 2016 | [144] |
| 10 | Banu, A., Ali, Mohammad Y. | Electrical discharge machining (EDM): a review | This paper provides an important review on different types of EDM operations. A brief discussion is also performed on the machining responses and mathematical modeling | 2016 | [145] |
| 11 | Gangil M., Pradhan, M.K | Modeling and optimization of electrical discharge machining process using RSM: a review | The main focus is on the optimization aspects of various parameters of the EDM processes using RSM & hence only such research works are included in this work. | 2017 | [146] |
| 12 | Abdul et al. | A review of additive mixed- electric discharge machining: current status and future perspectives for surface modification of biomedical implants | This paper reports and summarizes the current advancement of AM-EDM as a potential tool for orthopedic and dental implant fabrication | 2017 | [147] |
| 13 | Hourmand, M., Sarhan, A.A.D., Mohd Sayuti | Micro-electrode fabrication processes for micro-EDM drilling and milling: a state-of-the-art review | This paper presents a state-of-the-art review of micro-EDM process as well as the various kinds of microelectrode and workpiece materials and dielectrics that have been used by previous researchers | 2017 | [148] |
| 14 | Meshram, D. B., Puri, Y. M. | Review of research work in die-sinking EDM for machining curved hole | This review paper explains the mechanisms and methods adopted for developing the curved hole machining | 2017 | [149] |
| 15 | Aidil, A.R.M., Minhat, M., Hussein, N.I.S. | Current research trends in wire electrical discharge machining (WEDM): a review | This paper reviews the experimental results on performance evaluation of machining parameters that affected machining performance which would reflect the machining factors and responses | 2018 | [150] |
| 16 | Selvarajana, L., Manoharb, M., Amos Robert Jayachandran, J., Selvakumare, P.M.P. | A Review on Less Tool Wear Rate and Improving Surface Quality of Conductive Ceramic Composites by Spark EDM A Review on Less Tool Wear Rate and Improving Surface Quality of Conductive Ceramic Composites by Spark EDM A review on less tool wear rate and improving surface quality of conductive ceramic composites by spark EDM |
In this paper authors have reviewed the research work carried out in the development of EDM in the past decades for the improvement of machining characteristics such as surface roughness and tool wear ratio | 2018 | [151] |
| 17 | Patel, J.B., Darji, R.S., Dalai, M.K. | Powder mixed EDM for improvement of MRR and surface finish: a review | From the review, it can be understood that the optimization of input parameters of PMEDM like pulse on-time, pulse off-time, servo voltage, peak current, slurry concentration, flushing pressure can improve the characteristics | 2018 | [152] |
| 18 | Maity, K.P., Choubey, M. | A review on vibration-assisted EDM, micro-EDM and WEDM | This paper reviews the research work carried out by the researchers on vibration-assisted EDM, micro-EDM, and wire EDM | 2018 | [153] |
| 19 | Kumar, V., Beri, N., Kumar, A. | Electric discharge machining of titanium and alloys for biomedical implant applications: a review | This review paper clearly exhibits the detailed study of parameters that critically influence the machinability and the optimal combination levels of machining parameters for MRR, TWR, SR, and WR | 2018 | [154] |
This review covers the description of performance measures for electro-discharge machining, review on modeling and optimization of performance parameters, detailed mathematical procedure used in various EDM analysis as well as current state-of-the-art work performed with description of newer applications of EDM.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.