Manufacturing Rev.
Volume 7, 2020
Special Issue - The emerging materials and processing technologies
Article Number 32
Number of page(s) 13
Published online 23 September 2020
  1. M. Kunieda, B. Lauwers, K.P. Rajurkar, B.M. Schumacher, Advancing EDM through fundamental insight into the process, CIRP Ann. Manufactur. Technol. 54 (2005) 64–87 [CrossRef] [Google Scholar]
  2. H. Majumder, K.P. Maity, J. Adv. Manuf. Syst. 168 (2017) 1–99 [Google Scholar]
  3. Y. Yildiz, M. Sundaram, K.P. Rajurkar, M. Nalbant, The Effects of Cold and Cryogenic Treatments on the Machinability of Beryllium-Copper Alloy in Electro Discharge Machining Industrial and Management Systems Engineering Faculty Publications 74 (2011) [Google Scholar]
  4. P. Chaudhury, S. Samantaray, Electro thermal modelling of electrical discharge machining of Be-Cu alloy by varying fraction of energy. Annales de Chimie-Science des Matériaux, Vol. 43, No. 4, pp. 273–279 (2019) [Google Scholar]
  5. A. Khan, K. Maity, Application of MCDM-based TOPSIS method for the optimization of multi-quality characteristics of modern manufacturing processes, Int. J. Eng. Res. Africa 23 (2016) 24–32 [CrossRef] [Google Scholar]
  6. A. Khan, K. Maity, Application of MCDM-based TOPSIS method for the optimization of multi-quality characteristics of modern manufacturing processes, Int. J. Eng. Res. Africa 23 (2016) 33–51 [Google Scholar]
  7. J.D. Patel, K.D. Maniya, Application of AHP/MOORA method to select wire cut electrical discharge machining process parameter to cut EN31 alloys steel with brass wire, Mater. Today Proc. 2 (2015) 2496–2503 [CrossRef] [Google Scholar]
  8. S. Dong, Z. Wang, Y. Wang, H. Liu, An experimental investigation of enhancement surface quality of micro-holes for SiC 4 vol% CNTs using micro-EDM with multi-diameter electrode and different dielectrics, Proc. CIRP 42 (2016) 257–262 [CrossRef] [Google Scholar]
  9. K.P. Rajurkar, W.M. Wang, R.P. Lindsay, Real-time stochastic model and control of EDM, CIRP Annals 39 (1990) 187–190 [CrossRef] [Google Scholar]
  10. K.P. Rajurkar, S.M. Pandit, Adaptive control of EDM − technology and research, in Manufacturing Engineering Transactions. Dearborn, MI, USA SME, North American Manufacturing Research Inst., 1985, pp. 8–14 [Google Scholar]
  11. S. Li, X. Xiong, Multi-response robust design based on principal component and grey relational analysis, 2014 11th World Congress on Intelligent Control and Automation (WCICA) (2014) 5024–5029 [CrossRef] [Google Scholar]
  12. A.P. Paiva, J.R. Ferreira, P.P. Balestrassi, A multivariate hybrid approach applied to AISI 52100 hardened steel turning optimization, J. Mater. Process. Technol. 189 (2007) 26–35 [CrossRef] [Google Scholar]
  13. I. Portnoy, K. Melendez, H. Pinzon, M. Sanjuan, An improved weighted recursive PCA algorithm for adaptive fault detection, Control Eng. Pract. 50 (2016) 69–83 [CrossRef] [Google Scholar]
  14. M.K. Pradhan, Estimating the effect of process parameters on MRR, TWR and radial overcut of EDMed AISI D2 tool steel by RSM and GRA coupled with PCA, Int. J. Adv. Manufactur. Technol. 68 (2013) 591–605 [CrossRef] [Google Scholar]
  15. K.P. Maity, D.K. Bagal, Effect of process parameters on the cut quality of stainless steel of plasma arc cutting using a hybrid approach, Int. J. Adv. Manufactur. Technol. 78 (2015) 161–175 [CrossRef] [Google Scholar]
  16. A. Azadeh, S.F. Ghaderi, M. Fazli Ahmadabad, Multi-criteria quality assessment of products by integrated DEA-PCA approach, Int. J. Reliab. Qual. Safety Eng. 14 (2007) 201–218 [CrossRef] [Google Scholar]
  17. A. Saha, S.C. Mondal, Multi-objective optimization of welding parameters in MMAW for nano-structured hardfacing material using GRA coupled with PCA, Trans. Indian Inst. Metals (2016) doi:10.1007/s12666-016-0945-1 [Google Scholar]
  18. Saha, S.C. Mondal, Experimental investigation and modeling of WEDM process for machining nano-structured hard facing material, J. Br. Soc. Mech. Sci. Eng. (2016) doi 10.1007/s40430-016-0608-5 [Google Scholar]
  19. T.B. Rao, A.G. Krishna, Simultaneous optimization of multiple performance characteristics in WEDM for machining ZC63/SiCp MMC, Adv. Manufactur. 1 (2013) 265–275 [CrossRef] [Google Scholar]
  20. A. Saha, H. Majumder, Performance analysis and optimization in turning of ASTM A36 through process capability index, J. King Saud Univ. Eng. Sci. (2016) http// [Google Scholar]
  21. M.H. Chen, L. Gao, J.H. Zhou, M. Wang, Application of reaction sintering to the manufacturing of a spacecraft combustion chamber of SiC ceramics, J. Mater. Process. Technol. 129 (2002) 408–411 [CrossRef] [Google Scholar]
  22. Y. Fukuzawa, N. Mohri, H. Gotoh, T. Tani, Three-dimensional machining of insulating ceramics materials with electrical discharge machining, Trans. Non-ferrous Metal Soc. China 19 (2009) s150–s156 [CrossRef] [Google Scholar]
  23. J.A. Mc Geough, Advanced methods of machining (Springer; 1988) [Google Scholar]
  24. W. König, D.F. Dauw, G. Levy, U. Panten. EDM-future steps towards the machining of the ceramics, CIRP Ann. Manufactur. Technol. 37 (1988) 623–631 [CrossRef] [Google Scholar]
  25. K. Gupta, N.K. Jain, Analysis and optimization of micro-geometry of miniature spur gears manufactured by wire electric discharge machining, Precis. Eng. 38 (2014) 728–737 [CrossRef] [Google Scholar]
  26. K. Gupta, N.K. Jain, Comparative study of Wire-EDM and Hobbing for manufacturing high-quality miniature gears, Mater. Manufactur. Processes 29 (2014) 1470–1476 [CrossRef] [Google Scholar]
  27. Y. Ziada, P. Koshy, Rotating curvilinear tools for EDM of polygonal shapes withsharp corners, CIRP Ann. Manufactur. Technol. 57 (2007) 221–224 [CrossRef] [Google Scholar]
  28. S. Kumar, An experimental study of the phenomenon of surface alloying by EDM process using Inconel tool electrode, ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, vol. 1 V001T01A040, 1–8. 10.1115/MSEC2013-1014 [Google Scholar]
  29. P. Friedrichs, T. Kimoto, L. Ley, G. Pensl, Silicon carbide 1: growth, defects, and novel applications (Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2010) [Google Scholar]
  30. G. Chi, Z. Wang, K. Xiao, K. Cui, B. Jin, The fabrication of a micro-spiral structure using EDM deposition in the air, J. Micro Mech. Microeng. 18 (2008) 1–9 [Google Scholar]
  31. P. Chaudhury, S. Samantaray, Finite element modelling of EDM of aluminum particulate metal matrix composites considering temperature dependent properties. Revue des Composites et des Materiaux Avances, Vol. 29, No. 1, pp. 53–62. (2019) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.