| Issue |
Manufacturing Rev.
Volume 7, 2020
Special Issue - The emerging materials and processing technologies
|
|
|---|---|---|
| Article Number | 8 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/mfreview/2020008 | |
| Published online | 28 February 2020 | |
- L. Hitzler, J. Hirsch, B. Heine, M. Merkel, W. Hall, A. Öchsner, Materials 10 (2017) 1136 [CrossRef] [Google Scholar]
- Y. Kok, X.P. Tan, P. Wang, M.L.S. Nai, N.H. Loh, E. Liu, S.B. Tor, Mater. Des. 139 (2018) 565–586 [CrossRef] [Google Scholar]
- M. Ni, C. Chen, X. Wang, P. Wang, R. Li, X. Zhang, K. Zhou, Mater. Sci. Eng. A 701 (2017) 344–351 [CrossRef] [Google Scholar]
- D. Denga, J. Moverare, R.L. Peng, H. Söderberg, Mater. Sci. Eng. A 693 (2017) 151–163 [Google Scholar]
- T. Mishurova, S. Cabeza, K. Artzt, J. Haubrich, M. Klaus, C. Genzel, G. Requena, G. Bruno, Materials 10 (2017) 348 [CrossRef] [Google Scholar]
- M. Letenneur, A. Kreitcberg, V. Brailovski, J. Manuf. Mater. Process. 3 (2019) 1 [Google Scholar]
- M. Mani, S. Feng, B. Lane, A. Donmez, S. Moylan, R. Fesperman, Additive Manufacturing Handbook: Product Development for the Defense Industry, A.B. Badiru, V.V. Valencia, D. Liu (Eds.) CRC Press, Boca Raton, 2017, pp. 629–676 [CrossRef] [Google Scholar]
- A.H. Maamoun, Y.F. Xue, M.A. Elbestawi, S.C. Veldhuis, Materials 11 (2018) 2343 [CrossRef] [Google Scholar]
- A.M. Khorasania, I. Gibsond, U.S. Awana, A. Ghaderic, Add. Manuf. 25 (2019) 176–186 [Google Scholar]
- X. Shi, S. Ma, C. Liu, C. Chen, Q. Wu, X. Chen, J. Lu, Materials 9 (2016) 975 [CrossRef] [Google Scholar]
- M. Ma, Z. Wang, M. Gao, X. Zeng, J. Mater. Process. Technol. 215 (2015) 142–150 [CrossRef] [Google Scholar]
- S. Bremen, M. Wilhelm, D. Andrei, Laser Tech. J. 9 (2012) 33–38 [Google Scholar]
- M. Król, T. Tański, Arch. Metall. Mater. 61 (2016) 1291–1296 [CrossRef] [Google Scholar]
- T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, W. Zhang, Prog. Mater. Sci. 92 (2018) 112–224 [Google Scholar]
- S.F. Siddiqui, A.A. Fasoro, A.P. Gordon, Additive Manufacturing H and book: Product Development for the Defense Industry, A.B. Badiru, V.V. Valencia, D. Liu (Eds.), CRC Press, Boca Raton, 2017 [Google Scholar]
- N.N. Kumbhar, A.V. Mulay, J. Inst. Eng. India Ser. C (2016) [Google Scholar]
- W.J. Sames, F.A. List, S. Pannala, R.R. Dehoff, S.S. Babu, Int. Mater. Rev. (2016) [Google Scholar]
- R. Li, J. Liu, Y. Shi, L. Wang, W. Jiang, Int. J. Adv. Manuf. Technol. 59 (2012) 1025–1035 [CrossRef] [Google Scholar]
- K. Mumtaz, N. Hopkinson, Rapid Prototyp. J. 15 (2009) 96–103 [CrossRef] [Google Scholar]
- J.C. Fox, S.P. Moylan, B.M. Lane, Proc. CIRP 45 (2016) 131–134 [CrossRef] [Google Scholar]
- S.A. Khairallah, A.T. Anderson, A. Rubenchik, W.E. King, Acta Mater. 108 (2016) 36–45 [CrossRef] [Google Scholar]
- M.J. Matthews, G. Guss, S.A. Khairallah, A.M. Rubenchik, P.J. Depond, W.E. King, Acta Mater. 114 (2016) 33–42 [CrossRef] [Google Scholar]
- A. Sola, A. Nouri, J. Adv. Manuf. Process. 1, 2019. https://doi.org/10.1002/amp2.10021 [CrossRef] [Google Scholar]
- J. Metelkova, Y. Kinds, C. de Formanoir, A. Witvrouw, B. Van Hooreweder, in 30th Solid Freeform Fabrication Symposium, 2019 [Google Scholar]
- W.E. King, H.D. Barth, V.M. Castillo, G.F. Gallegos, J.W. Gibbs, D. E. Hahn, C. Kamath, A.M. Rubenchik, J. Mater. Process. Technol. 214 (2014) 2915–2925 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.