EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Volume 8 (2021) Manufacturing Rev., 8 (2021) 1 References
Open Access
Review
Issue
Manufacturing Rev.
Volume 8, 2021
Article Number 1
Number of page(s) 15
DOI https://doi.org/10.1051/mfreview/2020038
Published online 08 January 2021
  1. Basic Research Needs for Materials under Extreme Environments. Report of the Basic Energy Science Workshop on Materials under Extreme Environments. Office of Basic Energy Sciences Department of Energy. 2008; http://www.sc.doe.gov/bes/reports/files/MUEE_rpt.pdf [Google Scholar]
  2. P.M. Martin, Handbook of Deposition Technologies for Films and Coatings, 3rd ed. Elsevier, 2010 [Google Scholar]
  3. Materials Science Forum. 2010; doi:10.4028/www.scientific.net/MSF.631-632.73 [Google Scholar]
  4. M.E. Brown, P.K. Galagher, Handbook of Thermal Analysis and Calorimetry Recent Advances. Techniques and Applications , Vol. 5, Elsevier, 2008 [Google Scholar]
  5. G.W.H. Hohne, W.F. Hemminger, H.J. Flammersheim, Differential Scanning Calorimetry , 2nd Edition, Springer, 2003 [CrossRef] [Google Scholar]
  6. M.E. Brown, Introduction to Thermal Analysis , 2nd ed. Kluwert Academic Publishers, 2001 [Google Scholar]
  7. C. Michaelsen, K. Barmak, T.P. Wiehs, Investigating the thermodynamics of thin film reactions by Direct Scanning Calorimetry, J. Phys. D Appl. Phys. 30 (1997) 3167–3186 [CrossRef] [Google Scholar]
  8. T. Hatekeyama, F.X. Quinn, Thermal Analysis. Fundamentals and Applications to Polymer Science , 2nd ed., T, John Wiley & Sons, 1999 [Google Scholar]
  9. F.J. Gotor, J.M. Criado, J. Malek, N. Koga, The universality of master plots for analyzing isothermal and nonisothermal experiments, J. Phys. Chem. A 104 (2000) 10777–10782 [CrossRef] [Google Scholar]
  10. E. Chason, P.R. Guduru, Understanding residual stress in polycrystalline thin films through real-time and measurements and physical models, J. Appl. Phys. 119 (2016) 191101 [CrossRef] [Google Scholar]
  11. M-S. Chu, S-K. Wu, Interreactions of TiAl3 Thin Film on Bulk γ-TiAl and on Bulk α2-Ti3Al Alloys at 700–1000 °C, Mater. Transac. 45 (2004) 1290–1298 [CrossRef] [Google Scholar]
  12. C. Yang, Y. Hu, R. Shen, Y. Ye, S. Wang, T. Hua, Fabrication and performance characterization of Al/Ni multilayer energetics films, Appl. Phys. A 114 (2013) 459 [CrossRef] [Google Scholar]
  13. P.R. Halani, I. Kaya, Y.C. Shin, H.E. Karaca, Phase transformation characteristics and mechanical characterization of nitinol synthesis by laser direct deposition, Mater. Sci. Eng. A 559 (2013) 836–843 [CrossRef] [Google Scholar]
  14. M. Mohri, M.N. Ahmadabali, Functionally graded shape-memory and pseudoelastic response in Ni-Rich/Ti-rich and vice versa NiTi mulilayer thin films deposited on Si(111), JOM 67 (2015) 1585–1593 [CrossRef] [Google Scholar]
  15. A. Ishida, Effects of grain size and co addition on the transformation temperatures of Ti-Ni-Zr thin films, Shape Mem. Superplasticity, 1 (2015) 408–417 [CrossRef] [Google Scholar]
  16. R.DV. Espiritu, A.V. Amorsolo, DSC analysis of Cu-Zn-Sn shape memory alloy fabricated via electrodeposition route, J. Therm. Anal. Calorim. 107 (2012) 483–487 [CrossRef] [Google Scholar]
  17. E.P. Georgiou, S. Dosta, J. Fernandez, P. Matteazzi, K. Kowalski, J. Kusinski, R.R. Piticescu, J.-P. Celis, Structural and tribological properties of nanostrcutured supersonic cold sprayed Ni-20 wt.% Sn coatings, J. Therm. Spray Technol. 25 (2016) 1029–1039 [CrossRef] [Google Scholar]
  18. R.W. Schwartz, M. Narayanan, Chemical Solution Deposition of Functional Oxide Thin Films, Thermodynamics and Heating Processes, Springer, 2013, 343–382 [Google Scholar]
  19. J. Ji, H. Sun, X-y. Mao, W. Wang, X. Chen, Structure and multiferroic properties of Bi5FeTi3O15 thin films prepared by the sol-gel method, J. Sol-Gel Sci. Technol. 61 (2012) 328–331 [CrossRef] [Google Scholar]
  20. K.D. Zhang, Z.R. Tian, J.B. Wang, B. Li, X.L. Zhong, D.Y. Guo, S.M. He, Preparation of Cu2ZnSnS4 thin films using spin-coating method with thermolysis and annealing, J. Sol-Gel Sci. Technol. 73 (2014) 452–459 [CrossRef] [Google Scholar]
  21. D. Alvarez, A. Collazo, C. Perez, Structural characterization and barrier properties of hybrid sol-gel films applied on tinplate, Surf. Coat. Technol. 321 (2017) 108–117 [CrossRef] [Google Scholar]
  22. V.G. Plescan, V. Musat, A. Pimentel, T.R. Calmeiro, E. Carlos, L. Baroiu, R. Martins, E. Fortunato, Hybrid (Ag)ZnO/Cs/PMMA nanocomposite thin films, J. Alloys Compd. 803 (2019) 922–933 [CrossRef] [Google Scholar]
  23. A. Zarkov, A. Stanulius, J. Sakaliuniene, S. Butkute, B. Abakeviciene, T. Salkus, S. Tautkus, A.F. Orliukas, S. Tamulevicius, A. Kareiva, On the synthesis of yttria-stabilized zirconia: a comparative study, J. Sol-Gel Sci. Technol. 76 (2015) 309–319 [CrossRef] [Google Scholar]
  24. C. Marinescu, A. Sofronia, C. Rusti, R. Piticescu, V. Badilita, E. Vasile, R. Baies, S. Tanasescu, J. Therm. Anal. Calorim. 103 (2011) 49–57 [CrossRef] [Google Scholar]
  25. A.K. Pradhan, D. Hunrter, B.L. Hunter, J.B. Dadson, K. Zhang, R.R. Rakhimov, Oxide-based diluted ferromagnetic semiconductors: ZnMnO and Co:TiO2 , J. Appl. Phys. 99 (2006) 08M10 [CrossRef] [Google Scholar]
  26. R.R. Piticescu, S.N. Valsan, M. Petriceanu, V. Badilita, I.A. Tudor, D. Taloi, B. Vasile, O. Raita, Kinetic studies on the hydrothermal crystallization of Co-doped nanostructured TiO2 anatase with ferromagnetic properties, J. Optoelectron. Adv. Mater. 17 (2015) 646–654 [Google Scholar]
  27. C. Gaidau, A. Petica, M. Ignat, L.M. Popescu, R.M. Piticescu, I.A. Tudor, R.R. Piticescu, Preparation of SiO2 doped TiO2 nanoparticles with thermal stability and photocatalytic properties and its application for leather surface functionalization, Arab. J. Chem. 10 (2016) 985–1000 [CrossRef] [Google Scholar]
  28. S.B. Ulaeto, R. Rajan, J.K. Pancrecious, T.P.D. Rajan, B.C. Pai, Developments in smart anticorrosive coatings with multifunctional characteristics, Prog. Org. Coat. 111 (2017) 294–314 [CrossRef] [Google Scholar]
  29. Z.-P. Zhang, X.-F. Song, L.-Y. Cui, Y.-H. Qi, Synthesis of polydimethylsiloxane-modified polyurethane and the structure and properties of its antifouling coatings, Coatings 8 (2018) 157 [CrossRef] [Google Scholar]
  30. B.C. Roca, S.M.D. Romero, A.N. Arnaiz, P.I. Rodríguez, G.I. Martín, Synergetic effect of CNTs and graphite for electrical properties: joule effect. 5th World Congress on Materials Science and Engineering, 22–23rd August 2019, Valencia, Spain [Google Scholar]
  31. E. Celia, T. Darmanin, E.T. De Givenchy, S. Amigoni, F. Guittard, Recent advances in designing super-hydrophobic surfaces, J. Colloid Interface Sci. 402 (2013) 1–18 [CrossRef] [Google Scholar]
  32. A.M. Motoc, A.I. Tudor, M. Petriceanu, A. Celzard, R.R. PITICESCU, In-situ synthesis and attachment of colloidal ZnO nanoparticles inside porous carbon structures, Mater. Chem. Phys. 161 (2015) 219–227 [CrossRef] [Google Scholar]
  33. E.L. Corral, R.E. Loehman, Ultra-high temperature ceramic coatings for oxidation protection of Carbon-Carbon composites, J. Am. Ceram. Soc. 91 (2008) 1495–1502 [CrossRef] [Google Scholar]
  34. D.R. Clarke, C.G. Levi, Materials design for the next generation thermal barrier coatings, Ann. Rev. Mater. Res. 33 (2003) 383–417 [CrossRef] [Google Scholar]
  35. S. Ilina, G. Ionescu, V. Manoliu, R.R. Piticescu, Nanostructured zirconia layers as thermal barrier coatings, INCAS Bull. 3 (2011) 63–69 [Google Scholar]
  36. G. Ionescu, V. Manoliu, E. Alexandrescu, A. Stefan, A. Mihailescu, The behavior of multilayer ceramic protecting at thermal shock, INCAS Bull. 5 (2013) 25–32 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.